Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2205074

Range of shower heads with or without wall connectors (see models) with plastic bodies (various finishes). The shower heads incorporate a stainless-steel strainer and plastic flow regulator on the inlet. Model added September 2023: Wall mounted, brass shower arm (various finishes - see model). Non-metallic materials and components comply with BS6920 at 60°C Models added September 2023 and January 2024: Non-metallic materials and components comply with BS6920 at 65°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2205074
Note:: Open outlet use only. The 24 357 xx0 model is not approved in its own right.
Size:: 24 140 xxx: ½” BSP (F). 24 150 xxx: N/A (can only be used with compatible Hansgrohe products). Model added September 2023: 24 357 xx0: ½” BSP (M) Models added November 2023: 24 141 xxx: ½” BSP (F). 24 151 xxx: N/A (can only be used with compatible Hansgrohe products). Model added January 2023: 24 149 xx0 ½” BSP (M).
Marking:: Hansgrohe on shower face
Installation Requirements:: R001 R040
Expiry date:: 31/05/2027
Model:: 24 140 xxx Hansgrohe Pulsify S Overhead shower 260 1jet 24 150 xxx Hansgrohe Pulsify S Overhead shower 260 2jet with wall connector Model added September 2023: 24 357 xx0 Hansgrohe Shower arm S 39 cm (which must be installed in conjunction with the 24 140 xxx model or 24 141 xx0 model added November 2023) Models added November 2023: 24 141 xx0 Hansgrohe Pulsify S Overhead shower 260 1jet EcoSmart 24 151 xx0 Hansgrohe Pulsify S Overhead shower 260 2jet EcoSmart with wall connector Model added January 2023: 24 149 xx0 Hansgrohe Pulsify Wall connector for overhead shower 260 (which must be used with a Hansgrohe Overhead shower). Where xxx or xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #2112065

A range of shower kits and hand showers incorporating metal bodies (chrome plated). Some models are supplied with sliding rails, wall elbows and shower hoses (see models). Maximum working temperature 60°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2112065
Note:: For open outlet use only
Size:: ½” BSP (M)
Marking:: CP HART on handset.
Installation Requirements:: R001 R040
Expiry date:: 31/12/2026
Model:: ZCPHSP2150 & CPHSP2150 - Sliding rail with double braided hose and brass hand shower ZCPHSP2953SS & CPHSP2953SS - Sliding metal hose and inox hand shower ZCPHSP22874 & CPHSP22874- Shower kit with wall outlet, PVC hose and abs hand shower ZCPHSP22874OT & CPHSP22874OT - Shower kit with water elbow, double braided hose and brass hand shower ZCPHSP29514SS & CPHSP29514SS - Shower kit with metal hose and inox hand shower ZCPHSP2956SS & CPHSP2956SS - Hand shower

Approval Holder:: C.P.Hart

Company Name
C.P.Hart
Address
Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford
Postcode
DA2 6QA
Country
United Kingdom
General Email
roy.davis@cphart.co.uk

View All Listings by this Company

WRAS Approval Number: #2206319

Range of handshower holders with brass bodies (various finishes). The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 65°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2206319
Note:: Open outlet use only.
Size:: ½” BSP (M)
Marking:: Kohler on body
Installation Requirements:: R001 R040
Expiry date:: 30/06/2027
Model:: 14791W-** LOURE® Where ** denotes finish and can be replaced with: 2BZ - Oil Rubbed Bronze, BZ - Antique Bronze, SA - Antique Silver, 96 - Biscuit, 7 - Black, W7 - Black Nickel, LB - Bronze, G - Brushed Chrome, AG - Brushed Nickel, BS - Brushed Stainless, FGN - Chartreuse, FRD - Cherry Red, GN - Gunmetal, BL - Matte Black, YG - Matte Gold, FNY - Navy Blue, AD - Nickel Silver, R2B - Oil Rubbed Bronze-Gold, CP - Polished Chrome, 1CP - Polished Chrome, ABS PGD - Polished Gold, 24K - Polished Gold, S - Polished Stainless, AGP PVD - Brushed Nickel, 24P PVD - Polished Gold, ADP PVD - Silver Nickel, FBG - Retro Blue, RGD - Rose Gold, TB - Satin Black, SSL - Sterling Silver, TT - Titanium, ULB - Un-lacquered Brass, BV - Vibrant Brushed Bronze, BN - Vibrant Brushed Nickel, AF - Vibrant French Gold, BGD - Vibrant Modern Brushed Gold, PB - Vibrant Polished Brass, SN - Vibrant Polished Nickel, VS - Vibrant Stainless, VNT - Vintage Nickel, W6 - Weathered Bronze, 0 - White, 2MB - Modern Brass.

Approval Holder:: Kohler Mira Ltd.

Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:: Beijing Kohler Ltd

Company Name
Beijing Kohler Ltd
Address
General Email

View All Listings by this Company

WRAS Approval Number: #2206348

Range of shower heads with brass bodies (various finishes), incorporating EPDM ‘O’-rings and plastic flow regulator. Maximum operating temperature 60°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2206348
Note:: Open outlet use only.
Size:: ½” BSP (F)
Marking:: Kohler on face.
Installation Requirements:: R001 R040
Expiry date:: 30/06/2027
Model:: Katalyst range: 13689W-** 13690W-** 13691W-** 14536W-** 13696W-** 13695W-** 13693W-** 13694W-** 13692W-** Where ‘**” denotes the surface finish and is replaced by: 2BZ - Oil Rubbed Bronze, BZ - Antique Bronze, SA - Antique Silver, 96 - Biscuit, 7 - Black, W7 - Black Nickel, LB - Bronze, G - Brushed Chrome, AG - Brushed Nickel, BS - Brushed Stainless, FGN - Chartreuse, FRD - Cherry Red, GN - Gunmetal, 2BL - Matte Black, YG - Matte Gold, FNY - Navy Blue, AD - Nickel Silver, R2B - Oil Rubbed Bronze-Gold, CP - Polished Chrome, 1CP - Polished Chrome, ABS PGD - Polished Gold, 24K - Polished Gold, S - Polished Stainless, AGP PVD - Brushed Nickel, 24P PVD - Polished Gold, ADP PVD - Silver Nickel, FBG - Retro Blue, RGD - Rose Gold, TB - Satin Black, SSL - Sterling Silver, TT - Titanium, ULB - Un-lacquered Brass, BV - Vibrant Brushed Bronze, BN - Vibrant Brushed Nickel, AF - Vibrant French Gold, BGD - Vibrant Modern Brushed Gold, PB - Vibrant Polished Brass, SN - Vibrant Polished Nickel, VS - Vibrant Stainless, VNT - Vintage Nickel, W6 - Weathered Bronze, 0 - White, 2MB - Modern Brass.

Approval Holder:: Kohler Mira Ltd.

Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:: Kohler Mira Ltd.

Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

WRAS Approval Number: #2201061

Range of wall mounted hose union taps (brass body or DZR brass body - see model) incorporating a non-rising spindle headwork with a ‘T’-type operating member. The 1BCB001 & 1BCB701 models incorporate two approved single check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 14.0 Bar. Maximum operating temperature 85°C.

Section:: 1780 Taps
Section Subtitle:: Hose union tap(s).
WRAS Approval Number:: 2201061
Size:: ½” BSP (M).
Marking:: 1BCA001: BS1010-2, IDC ‘E’ Logo and size on body. 1BCB001: BS1010, BS6282, IDC ‘E’ logo, CR and size on body. 1BCB701: BS1010, BS6282, IDC ‘E’ logo and size on body.
Installation Requirements:: R001 R040
Expiry date:: 31/01/2027
Model:: Brass body: 1BCA001, 1BCB701. DZR brass body: 1BCB001.

Approval Holder:: IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:: IDC Fluid Control Co., Ltd.

Company Name
IDC Fluid Control Co., Ltd.
Address
No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Zhejiang, Taizhou City, Zhejiang Province, P. R.China
Country
China
General Email

View All Listings by this Company

WRAS Approval Number: #2201086

Range of wall mounted hose union taps (brass body or DZR brass body - see model) incorporating a non-rising spindle headwork with a ‘T’-type operating member. Maximum working pressure 14.0 Bar. Maximum operating temperature 85°C.

Section:: 1780 Taps
Section Subtitle:: Hose union tap(s).
WRAS Approval Number:: 2201086
Size:: ½” BSP (M).
Marking:: MF, Masterflow -A- Logo, size, CR, WRAS, BS1010-2 & BS6282 on body.
Installation Requirements:: R001 R040
Expiry date:: 31/01/2027
Model:: MBHU04 & MBHU04DCV HOSE UNION TAPS

Approval Holder:: Masterflow Products Limited

Company Name
Masterflow Products Limited
Address
70-76 Greatbridge Water Street Manchester Lancashire
Postcode
M1 5ES

View All Listings by this Company

WRAS Approval Number: #2204701

PEX lined flexible hose assemblies with either nylon or stainless-steel braiding and a variety of end connectors. Some models are supplied with screwdriver operated isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2204701
Size:: See model
Marking:: HRN’, ‘WRAS’ and manufacturing date (YY/MM) on ferrule.
Installation Requirements:: R001 R008
Expiry date:: 30/04/2027
Model:: Bore diameter: DN8, DN10 or DN13 End connections: ½” BSP F, 3/8” BSP F, ¾” BSP F, ½” BSP M, 3/8” BSP M & ¾” BSP M. M8, M10, M12 & M15. 10mm compression, 12mm compression, 15mm compression & 22mm compression. 15mm compression isolation valve & 22mm compression isolation valve. 3-WAY connector x 9mm Quick connector 9mm M-Quick plastic connector, 9mm M-quick Brass connector 135-A-B-C-D-E-F. The letters denote the following (for DN8): A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective. E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective F denotes DN size and is replaced by: 0 = DN8. The letters denote the following (for DN10) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN10 The letters denote the following (for DN13) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 03 = ¾” F, 17 = ½” M, 19 = 3/4” M, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 48 = M16, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN13

Approval Holder:: APIS (Xiamen) Co., Ltd.

Company Name
APIS (Xiamen) Co., Ltd.
Address
1F, 5F, Main building No 198-204 YingYao Road
Country
Jimei District

View All Listings by this Company
Manufacturer:: APIS (Xiamen) Co., Ltd.

Company Name
APIS (Xiamen) Co., Ltd.
Address
1F, 5F, Main building No 198-204 YingYao Road
Country
Jimei District

View All Listings by this Company

WRAS Approval Number: #2201029

Range of stainless steel and brass double interlocked PEX lined flexible hose assemblies (various finishes - see model) incorporating EPDM washers. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2201029
Size:: See model
Marking:: IL Flessibile company logo (ilF in a circle), WRAS and year of manufacture (YY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/01/2027
Model:: FXW2CX.AABBCCCC.DDD Model code key: AA: identifies hose raw material and diameter BB: identifies the type of external finish CCCC: identifies the type of fittings DDD: identifies the length (between 50 and 200cm) DN 14 various brass end connectors: ½" BSP knurled nuts - female, ½" BSP hexagonal nuts - female, ½” BSP smooth nuts - female, ½" BSP conical nuts - female, ½" BSP anti-twist conical nuts - female, ¾” BSP knurled round nut - female, ⅜” BSP nuts - female, ⅜" BSP cylindrical connector - female, ½" BSP demountable connector - female, ⅜” BSP (M), M15 x1, M12 x1. DN 15 various brass end connectors: ½" BSP knurled nuts - female, ½" BSP hexagonal nuts - female, ½” BSP smooth nuts - female, ½” BSP conical nuts - female, ½” BSP anti-twist conical nuts - female, ⅜” BSP (M). DN 17 brass end connectors: ½” BSP (F) x ½” BSP (F). Surface finishes: Raw, Chromed, Electropolished, Polished, Gold, Bronze, Copper, Nickel, ACR, White, Black, Red, Grey, Silver, Old brass, Beige, Green, Yellow, Orange, Champagne, Fumé, Black metal, Gun metal.

Approval Holder:: IL FLESSIBILE di Nicastri e C srl

Company Name
IL FLESSIBILE di Nicastri e C srl
Address
VIA FELICE VEDANI 16 INVORIO
Postcode
28045
Country
Italy
Phone
+39 335 5948283
General Email
g.buratti@ilflessibile.it

View All Listings by this Company
Manufacturer:: IL FLESSIBILE di Nicastri e C srl

Company Name
IL FLESSIBILE di Nicastri e C srl
Address
VIA FELICE VEDANI 16 INVORIO
Postcode
28045
Country
Italy
Phone
+39 335 5948283
General Email
g.buratti@ilflessibile.it

View All Listings by this Company

WRAS Approval Number: #2201334

Range of PET (Polyethylene terephthalate) braided flexible hoses incorporating PEX liner and EPDM ‘O’-rings. Maximum working pressure 5.0 bar. (10.0 bar for models added September 2025). Maximum operating temperature 70°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2201334
Size:: See Model
Marking:: TUCAI, NT, WRAS and date of manufacture (YY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/01/2027
Model:: PULLOUT PEX BL DN6: hose bore DN6 PULLOUT PEX BL: hose bore DN8 End connections for both DN6 & DN8: H1/2 conical, H1/2 ET, H1/2 UJ, H3/8 UJ, H3/8 Captive nut, H1/2 Captive nut, H11x1 Captive nut, M15X1, M8X1, M10X1, M12X1, M14X1, M15X1 with ‘O’-ring, LISO 10, LISO 8, CLIP 10, CLIP 11, CLIP 15, G3/8 BSP, M16x1, M16x1 with ‘O’-ring, M18x1.5, M18x1.5 with ‘O’-ring, M22x1, CLIP 14, 1/2-18UNS, 11/16-16 UNS Models and sizes added December 2024; PULLOUT PEX BL DN6: stainless steel braiding PULLOUT PEX BL ACB DN6: polymeric PA braiding PULLOUT PEX BL: DN 8 stainless steel braiding PULLOUT PEX BL ACB: DN8, polymeric PA braiding Available fittings: M10X1 M11X1 M12X1 M12X1.5 M15X1 1/2-18UNS 11/16-16UN 1/2-14NPSM G3/8 G1/2 CLIP 10 CLIP 14 Models added in September 2025 M15X1 11/16-16UN G3/8 G1/2 G1/2 axial seal

Approval Holder:: Tucai SA

Company Name
Tucai SA
Address
Llobateras 10-12, Poligomo Industrial Santiga, 08210 Barbera Del Valles (Barcelona)
Country
Spain
Phone
+34 93 718 9562

View All Listings by this Company
Manufacturer:: Ningbo Tucai Flexible Pipe Co., Ltd.

Company Name
Ningbo Tucai Flexible Pipe Co., Ltd.
Address
No. 1 Beixing Road, Mazhu Town Yuyao, Zheijiang, 31450
Country
China

View All Listings by this Company

WRAS Approval Number: #2201027

Range of stainless-steel interlocked shower hoses (various finishes (see model) incorporating an EDPM liner and NBR washers. Maximum working temperature 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2201027
Note:: Open outlet use only.
Size:: ½" BSP captive nut inlet and outlet.
Marking:: Connection 1 (G1/2 Hexagon nut): Delmei, WRAS and year of manufacture (YYYY) on nut. Connection 3 (G1/2 External ‘O’-ring speaker connector): Delmei, WRAS and year of manufacture (YYYY) on conical nut. Connection 5 (G1/2 Full vertical wire connector): Delmei, WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/01/2027
Model:: Models: DH-A-B-CC-D 15cm-250cm A denotes inner diameter: 1 - 6-7mm, 2 - 7-8mm, 3- 7-9mm, 4- 10 -12mm, 5- 11 -12mm. B denotes core 1 brass, 2 stainless steel. C denotes connectors for each end: 1 G1/2 Hexagon nut, 2 G1/2 knurled nut, 3 G1/2 External ‘O’- ring speaker connector, 4 G1/2 knurled horn connector, 5 G1/2 Full vertical wire connector. PLEASE NOTE The product is not available with connection 2 or connection 4 at both ends, or combined, e.g. connection 2 at one end and connection 4 at the other. Connections 2 and 4 will always be provided with connections 1, 3 or 5 at the other end. D denotes surface finish: 1 CP, 2 MB, 3 BN, 4 EA, 5 ORB, 6 Imitation gold Example model code: DH -1-1-14-2 250cm DH shower hose with 6-7mm inner diameter, brass core, G1/2 Hexagon nut x G1/2 knurled horn connector, MB finish, 250cm length.

Approval Holder:: Xiamen Delmei Sanitary Ware Co Ltd

Company Name
Xiamen Delmei Sanitary Ware Co Ltd
Address
No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company
Manufacturer:: Xiamen Delmei Sanitary Ware Co Ltd

Company Name
Xiamen Delmei Sanitary Ware Co Ltd
Address
No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company