Range of UV disinfection units with stainless steel bodies. Maximum working pressure 10.3 bar. Maximum operating temperature 60°C.

Section:

2411 Disinfection Equipment

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Luminor Rainier, model, WRAS and serial number on adhesive label on body

Installation Requirements:

R001 R150 R170

Expiry date:

31/05/2029

Model:

Single Lamp UV Disinfection Units: LRx-35X Rainier - 1½” NPT (M). LRx-55X Rainier - 2” NPT (M). LRx-85X Rainier - 2” NPT (M). Double Lamp UV Disinfection Units: LRx-110X Rainier - 2½” NPT (M). LRx-140X Rainier - 3” NPT (M). LRx-175X Rainier - 4” NPT (M). X denotes a UV sensor or a glow plug and is replaced with: 5= Glow Plug & 6 = UV Sensor. X denotes the type of power cord and is replaced with: 1 = NEMA 5/15. 2 = CEE 7/7. 3 = BS1363. 4 = AS/NZ 3112. 5 = NEMA 6/15. Additional Suffixes can be used for different lamps or sensor calibrations: HW, TOC or 50.

Product Images

Approval Holder:

Luminor Environmental Inc.

Company Name

Luminor Environmental Inc.

Address

80 Southgate Drive, Unit 4, Guelph, ON Guelph

Postcode

N1G 4P5

Country

Canada,

View All Listings by this Company

'(POM) MC90'. White coloured, injection moulded POM material. For use with water up to 85°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240655012

Expiry date:

30/06/2029

Approval Holder:

(Kaifeng) Longyu Chemical Co., Ltd.

Company Name

(Kaifeng) Longyu Chemical Co., Ltd.

Address

Gegang, Qi Country, Kaifeng City, Henan Province

Country

China

View All Listings by this Company

'LAC 500 MP5022'. White coloured (opaque), extruded ABS material. For use with water up to 23°C.

Section:

5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)

Expiry date:

30/06/2029

Approval Holder:

MP3 Srl

Company Name

MP3 Srl

Address

Via Muzza Spadetta 36, 40053 Valsamoggia, Bologna

Country

Italy

View All Listings by this Company

'Magnum 8391 UV White TM8302386'. White coloured, injection moulded ABS material. For use with water up to 85°C.

Section:

5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)

Expiry date:

31/08/2029

Approval Holder:

Resinex UK Ltd.

Company Name

Resinex UK Ltd.

Address

11 The Valley Centre, Gordon Road High Wycombe, Buckinghamshire

Postcode

HP13 6EQ

Country

Bucks.

Phone

+44 (0) 1494 459 881

General Email

info@resinex.co.uk

View All Listings by this Company

'Edelpoxy FN TM 142'. Factory coloured, red coloured epoxy resin coating consisting of a base and hardener. Mix base and hardener in a 3:1 volume ratio and apply as per manufacturer's IFU 'PCC/ PC 142', dated '10.07.2018'. Cure for 7 days@30°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240555036

Expiry date:

31/05/2029

Approval Holder:

PC Chanda & Co. PVT Ltd.

Company Name

PC Chanda & Co. PVT Ltd.

Address

Ravi Auto House, 103 Park Street, 6th Floor, Kolkata 700016

Country

India

View All Listings by this Company