Range of Reliable press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404053

Size:

see models

Marking:

Bastion Logo (Trademark of Reliable U.K Trading) size etched on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Press Straight Coupling ZL-KM101-S1515 --- 15mm ZL-KM101-S2222 --- 22mm ZL-KM101-S2828 --- 28mm ZL-KM101-S3535 --- 35mm ZL-KM101-S4242 --- 42mm ZL-KM101-S5454 --- 54mm ZL-KM101-S6767 --- 66.7mm ZL-KM101-S7676 --- 76.1mm ZL-KM101-S8989 --- 88.9mm ZL-KM101-S108108 --- 108mm Press Slip Coupling ZL-KML102-S1515 --- 15mm ZL-KML102-S2222 --- 22mm ZL-KML102-S2828 --- 28mm ZL-KML102-S3535 --- 35mm ZL-KML102-S4242 ----42mm ZL-KML102-S5454 --- 54mm ZL-KML102-S6767 --- 66.7mm ZL-KML102-S7676 --- 76.1mm ZL-KML102-S8989 --- 88.9mm ZL-KML102-S108108 --- 108mm Press Reducing Coupling ZL-KM107-S2215 ---22mm*15mm ZL-KM107-S2815 ---28mm*15mm ZL-KM107-S2822 ---28mm*22mm ZL-KM107-S3515 ---35mm*15mm ZL-KM107-S3522 ---35mm*22mm ZL-KM107-S3528 ---35mm*28mm ZL-KM107-S4215 ---42mm*15mm ZL-KM107-S4222 ---42mm*22mm ZL-KM107-S4228 ---42mm*28mm ZL-KM107-S4235 ---42mm*35mm ZL-KM107-S5415 ---54mm*15mm ZL-KM107-S5422 ---54mm*22mm ZL-KM107-S5428 ---54mm*28mm ZL-KM107-S5435 ---54mm*35mm ZL-KM107-S5442 ---54mm*42mm ZL-KM107-S6728 ---66.7mm*28mm ZL-KM107-S6735 ---66.7mm*35mm ZL-KM107-S6742 ---66.7mm*42mm ZL-KM107-S6754 ---66.7mm*54mm ZL-KM107-S7635 ---76.1mm*35mm ZL-KM107-S7642 ---76.1mm*42mm ZL-KM107-S7654 ---76.1mm*54mm ZL-KM107-S7667 ---76.1mm*66.7mm ZL-KM107-S8942 ---88.9mm*42mm ZL-KM107-S8954 ---88.9mm*54mm ZL-KM107-S8967 ---88.9mm*66.7mm ZL-KM107-S8976 ---88.9mm*76.1mm ZL-KM107-S10842 ---108mm*42mm ZL-KM107-S10854 ---108mm*54mm ZL-KM107-S10867 ---108mm*66.7mm ZL-KM107-S10876 ---108mm*76.1mm ZL-KM107-S10889 ---108mm*88.9mm Press Fitting Reducer ZL-KM108-S2215 ---22mm*15mm ZL-KM108-S2815 ---28mm*15mm ZL-KM108-S2822 ---28mm*22mm ZL-KM108-S3515 ---35mm*15mm ZL-KM108-S3522 ---35mm*22mm ZL-KM108-S3528 ---35mm*28mm ZL-KM108-S4215 ---42mm*15mm ZL-KM108-S4222 ---42mm*22mm ZL-KM108-S4228 ---42mm*28mm ZL-KM108-S4235 ---42mm*35mm ZL-KM108-S5415 ---54mm*15mm ZL-KM108-S5422 ---54mm*22mm ZL-KM108-S5428 ---54mm*28mm ZL-KM108-S5435 ---54mm*35mm ZL-KM108-S5442 ---54mm*42mm ZL-KM108-S6728 ---66.7mm*28mm ZL-KM108-S6735 ---66.7mm*35mm ZL-KM108-S6742 ---66.7mm*42mm ZL-KM108-S6754 ---66.7mm*54mm ZL-KM108-S7635 ---76.1mm*35mm ZL-KM108-S7642 ---76.1mm*42mm ZL-KM108-S7654 ---76.1mm*54mm ZL-KM108-S7667 ---76.1mm*66.7mm ZL-KM108-S8942 ---88.9mm*42mm ZL-KM108-S8954 ---88.9mm*54mm ZL-KM108-S8967 ---88.9mm*66.7mm ZL-KM108-S8976 ---88.9mm*76.1mm ZL-KM108-S10842 ---108mm*42mm ZL-KM108-S10854 ---108mm*54mm ZL-KM108-S10867 ---108mm*66.7mm ZL-KM108-S10876 ---108mm*76.1mm ZL-KM108-S10889 ---108mm*88.9mm Press 90°Elbow ZL-KM103-L1515 ---15mm ZL-KM103-L2222 ---22mm ZL-KM103-L2828 ---28mm ZL-KM103-L3535 ---35mm ZL-KM103-L4242 ---42mm ZL-KM103-L5454 ---54mm ZL-KM103-L6767 ---66.7mm ZL-KM103-L7676 ---76.1mm ZL-KM103-L8989 ---88.9mm ZL-KM103-L108108 ---108mm Press 90° Street Elbow ZL-KM104-L1515 ---15mm ZL-KM104-L2222 ---22mm ZL-KM104-L2828 ---28mm ZL-KM104-L3535 ---35mm ZL-KM104-L4242 ---42mm ZL-KM104-L5454 ---54mm ZL-KM104-L6767 ---66.7mm ZL-KM104-L7676 ---76.1mm ZL-KM104-L8989 ---88.9mm ZL-KM104-L108108 ---108mm Press 45°Elbow ZL-KM105-L1515 ---15mm ZL-KM105-L2222 ---22mm ZL-KM105-L2828 ---28mm ZL-KM105-L3535 ---35mm ZL-KM105-L4242 ---42mm ZL-KM105-L5454 ---54mm ZL-KM105-L6767 ---66.7mm ZL-KM105-L7676 ---76.1mm ZL-KM105-L8989 ---88.9mm ZL-KM105-L108108 ---108mm Press 45° Street Elbow ZL-KM106-L1515 ---15mm ZL-KM106-L2222 ---22mm ZL-KM106-L2828 ---28mm ZL-KM106-L3535 ---35mm ZL-KM106-L4242 ---42mm ZL-KM106-L5454 ---54mm ZL-KM106-L6767 ---66.7mm ZL-KM106-L7676 ---76.1mm ZL-KM106-L8989 ---88.9mm ZL-KM106-L108108 ---108mm Press End Cap ZL-KM111-D1515 ---15mm ZL-KM111-D2222 ---22mm ZL-KM111-D2828 ---28mm ZL-KM111-D3535 ---35mm ZL-KM111-D4242 ---42mm ZL-KM111-D5454 ---54mm ZL-KM111-D6767 ---66.7mm ZL-KM111-D7676 ---76.1mm ZL-KM111-D8989 ---88.9mm ZL-KM111-D108108 ---108mm Press Equal Tee ZL-KM109-T151515 ---15mm ZL-KM109-T222222 ---22mm ZL-KM109-T282828 ---28mm ZL-KM109-T353535 ---35mm ZL-KM109-T424242 ---42mm ZL-KM109-T545454 ---54mm ZL-KM109-T676767 ---66.7mm ZL-KM109-T767676 ---76.1mm ZL-KM109-T898989 ---88.9mm ZL-KM109-T108108108 ---108mm Press Part Crossover ZL-KM113-L1515 ---15mm ZL-KM113-L2222 ---22mm Press Full Crossover ZL-KM112-S1515 ---15mm ZL-KM112-S2222 ---22mm Press Reduced Elbow ZL-KM103-L2215 ---22mm*15mm ZL-KM103-L2815 ---28mm*15mm ZL-KM103-L2822 ---28mm*22mm Press Reducing Tee ZL-KM110-T152215 ---15mm*22mm*15mm ZL-KM110-T222822 ---22mm*28mm*22mm ZL-KM110-T221515 ---22mm*15mm*15mm ZL-KM110-T222215 ---22mm*22mm*15mm ZL-KM110-T282222 ---28mm*22mm*22mm ZL-KM110-T282822 ---28mm*28mm*22mm ZL-KM110-T281522 ---28mm*15mm*22mm ZL-KM110-T282815 ---28mm*28mm*15mm ZL-KM110-T352222 ---35mm*22mm*22mm ZL-KM110-T353522 ---35mm*35mm*22mm ZL-KM110-T353528 ---35mm*35mm*28mm ZL-KM110-T423535 ---42mm*35mm*35mm ZL-KM110-T221522 ---22mm*15mm*22mm ZL-KM110-T281528 ---28mm*15mm*28mm ZL-KM110-T282228 ---28mm*22mm*28mm ZL-KM110-T351535 ---35mm*15mm*35mm ZL-KM110-T352235 ---35mm*22mm*35mm ZL-KM110-T352835 ---35mm*28mm*35mm ZL-KM110-T421542 ---42mm*15mm*42mm ZL-KM110-T422242 ---42mm*22mm*42mm ZL-KM110-T422842 ---42mm*28mm*42mm ZL-KM110-T423542 ---42mm*35mm*42mm ZL-KM110-T541554 ---54mm*15mm*54mm ZL-KM110-T542254 ---54mm*22mm*54mm ZL-KM110-T542854 ---54mm*35mm*54mm ZL-KM110-T543554 ---54mm*35mm*54mm ZL-KM110-T544254 ---54mm*42mm*54mm ZL-KM110-T672867 ---66.7mm*28mm*66.7mm ZL-KM110-T673567 ---66.7mm*35mm*66.7mm ZL-KM110-T674267 ---66.7mm*42mm*66.7mm ZL-KM110-T675467 ---66.7mm*54mm*66.7mm ZL-KM110-T762276 ---76.1mm*22mm*76.1mm ZL-KM110-T762876 ---76.1mm*28mm*76.1mm ZL-KM110-T763576 ---76.1mm*35mm*76.1mm ZL-KM110-T764276 ---76.1mm*42mm*76.1mm ZL-KM110-T765476 ---76.1mm*54mm*76.1mm ZL-KM110-T766776 ---76.1mm*66.7mm*76.1mm ZL-KM110-T894289 ---88.9mm*42mm*88.9mm ZL-KM110-T895489 ---88.9mm*54mm*88.9mm ZL-KM110-T896789 ---88.9mm*66.7mm*88.9mm ZL-KM110-T897689 ---88.9mm*76.1mm*88.9mm ZL-KM110-T10854108 ---108mm*54mm*108mm ZL-KM110-T10867108 ---108mm*66.7mm*108mm ZL-KM110-T10876108 ---108mm*76.1mm*108mm ZL-KM110-T10889108 ---108mm*88.9mm*108mm

Approval Holder:

Reliable UK Trading Co., Ltd

Company Name

Reliable UK Trading Co., Ltd

Address

West side of prospect Close Kirkby in Ashfield

Postcode

NG17 7LF

Country

United Kingdom

View All Listings by this Company

Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107341

Size:

See model

Marking:

Flowflex logo, WRAS & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

CU Press Equal Elbow 90 deg 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Street Elbow 90 deg 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Equal Elbow 45 deg 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Street Elbow 45 deg 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Crossover 15mm, 22mm, 28mm CU Press Street Crossover 15mm, 22mm, 28mm CU Press Street Coupling 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Equal Tee 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU PRESS REDUCED BRANCH TEE CU PRESS REDUCED END AND BRANCH TEE CU PRESS REDUCED END TEE 15x15x22mm;22x15x15mm;22x15x22mm 22x22x15mm;22x22x28mm;28x15x15mm 28x15x22mm;28x22x15mm;28x22x22mm 28x22x28mm;28x28x15mm;28x28x22mm 28x28x35mm;35x22x22mm;35x22x35mm 35x28x22mm;35x28x28mm;35x28x35mm 35x35x15mm;35x35x22mm;35x35x28mm 40x28x28mm;42x35x35mm;42x28x42mm 42x35x42mm;42x42x15mm;42x42x22mm 42X42X28mm;42X42X35mm;54X54X15mm 54X54X28mm;54X54X35mm;54X42X42mm 54X54X42mm CU PRESS FITTING REDUCER 22x15mm;28x15mm;28x22mm;35x15mm 35x22mm;35x28mm;42x15mm;42x22mm 42x28mm;42x35mm;54x15mm;54x22mm 54x28mm;54x35mm;54x42mm CU PRESS FITTING REDUCER 22x15mm;28x15mm;28x22mm;35x15mm 35x22mm;35x28mm;42x15mm;42x22mm 42x28mm;42x35mm;54x15mm;54x22mm 54x28mm;54x35mm;54x42mm CU PRESS STOP END 15mm, 22mm, 28mm, 35mm, 42mm, 54mm

Approval Holder:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Range of PFD press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404060

Size:

see models

Marking:

PFD & size etched on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

60111515 15mm Pressfit Coupler 60112222 22mm Pressfit Coupler 60112828 28mm Pressfit Coupler 60113535 35mm Pressfit Coupler 60114242 42mm Pressfit Coupler 60115454 54mm Pressfit Coupler 60171515 15mm Pressfit Slip Coupler 60172222 22mm Pressfit Slip Coupler 60172828 28mm Pressfit Slip Coupler 60173535 35mm Pressfit Slip Coupler 60174242 42mm Pressfit Slip Coupler 60175454 54mm Pressfit Slip Coupler 60411515 15mm Pressfit Elbow 60412222 22mm Pressfit Elbow 60412828 28mm Pressfit Elbow 60413535 35mm Pressfit Elbow 60414242 42mm Pressfit Elbow 60415454 54mm Pressfit Elbow 60431515 15mm Pressfit Street Elbow 60432222 22mm Pressfit Street Elbow 60432828 28mm Pressfit Street Elbow 60433535 35mm Pressfit Street Elbow 60434242 42mm Pressfit Street Elbow 60435454 54mm Pressfit Street Elbow 60451515 15mm Pressfit Obtuse Elbow 60452222 22mm Pressfit Obtuse Elbow 60452828 28mm Pressfit Obtuse Elbow 60453535 35mm Pressfit Obtuse Elbow 60454242 42mm Pressfit Obtuse Elbow 60455454 54mm Pressfit Obtuse Elbow 60481515 15mm Pressfit Obtuse Street Elbow 60482222 22mm Pressfit Obtuse Street Elbow 60482828 28mm Pressfit Obtuse Street Elbow 60483535 35mm Pressfit Obtuse Street Elbow 60484242 42mm Pressfit Obtuse Street Elbow 60485454 54mm Pressfit Obtuse Street Elbow 60132215 22 x 15mm Pressfit Fitting Reducing 60132815 28 x 15mm Pressfit Fitting Reducing 60132822 28 x 22mm Pressfit Fitting Reducing 60133515 35mm x 15mm Pressfit Fitting Reducing 60133522 35 x 22mm Pressfit Fitting Reducing 60133528 35 x 28mm Pressfit Fitting Reducing 60134215 42 x 15mm Pressfit Fitting Reducing 60134222 42 x 22mm Pressfit Fitting Reducing 60134228 42 x 28mm Pressfit Fitting Reducing 60134235 42 x 35mm Pressfit Fitting Reducing 60135415 54 x 15mm Pressfit Fitting Reducing 60135422 54 x 22mm Pressfit Fitting Reducing 60135428 54 x 28mm Pressfit Fitting Reducing 60135435 54 x 35mm Pressfit Fitting Reducing 60135442 54 x 42mm Pressfit Fitting Reducing 60151515 15x15x15 mm Pressfit Equal Tee 60222222 22x22x22 mm Pressfit Equal Tee 60282828 28x28x28 mm Pressfit Equal Tee 60353535 35x35x35 mm Pressfit Equal Tee 60424242 42x42x42 mm Pressfit Equal Tee 60545454 54x54x54 mm Pressfit Equal Tee 60222215 22x22x15 mm Pressfit Reducing Tee 60282815 28x28x15 mm Pressfit Reducing Tee 60282822 28x28x22 mm Pressfit Reducing Tee 60353515 35x35x15 mm Pressfit Reducing Tee 60353522 35x35x22 mm Pressfit Reducing Tee 60353528 35x35x28 mm Pressfit Reducing Tee 60424215 42x42x15 mm Pressfit Reducing Tee 60424222 42x42x22 mm Pressfit Reducing Tee 60424228 42x42x28 mm Pressfit Reducing Tee 60424235 42x42x35 mm Pressfit Reducing Tee 60545415 54x54x15 mm Pressfit Reducing Tee 60545422 54x54x22 mm Pressfit Reducing Tee 60545428 54x54x28 mm Pressfit Reducing Tee 60545435 54x54x35 mm Pressfit Reducing Tee 60545442 54x54x42 mm Pressfit Reducing Tee 60221522 22x15x22 mm Pressfit Reducing Tee 60221515 22x15x15 mm Pressfit Reducing Tee 60282222 28x22x22 mm Pressfit Reducing Tee 60282228 28x22x28 mm Pressfit Reducing Tee 60151522 15x15x22 mm Pressfit Reducing Tee 60811515 15mm Pressfit End Cap 60812222 22mm Pressfit End Cap 60812828 28mm Pressfit End Cap 60813535 35mm Pressfit End Cap 60814242 42mm Pressfit End Cap 60815454 54mm Pressfit End Cap 60112215 22 x 15mm Pressfit Reducing Coupler 60112815 28 x 15mm Pressfit Reducing Coupler 60112822 28 x 22mm Pressfit Reducing Coupler 60113515 35 x 15mm Pressfit Reducing Coupler 60113522 35 x 22mm Pressfit Reducing Coupler 60113528 35 x 28mm Pressfit Reducing Coupler 60114215 42 x 15mm Pressfit Reducing Coupler 60114222 42 x 22mm Pressfit Reducing Coupler 60114228 42 x 28mm Pressfit Reducing Coupler 60114235 42 x 35mm Pressfit Reducing Coupler 60115415 54 x 15mm Pressfit Reducing Coupler 60115422 55 x 22mm Pressfit Reducing Coupler 60115428 56 x 28mm Pressfit Reducing Coupler 60115435 54 x 35mm Pressfit Reducing Coupler 60115442 54 x 42mm Pressfit Reducing Coupler 60291515 15MM Pressfit Full Crossover 60292222 22MM Pressfit Full Crossover 60271515 15MM Pressfit Part Crossover 60272222 22MM Pressfit Part Crossover 60422215 22mm x 15mm Pressfit Reducing Elbow 60422815 28 x 15mm Pressfit Reducing Elbow 60422822 28mm x 22mm Pressfit Reducing Elbow

Approval Holder:

PressFit Direct Ltd.

Company Name

PressFit Direct Ltd.

Address

10 Aylesbury Court Lapworth

Postcode

B94 6BE

View All Listings by this Company

Range of M profile brass press fittings with EPDM ‘O’-rings or gaskets to be used with copper pipe manufactured to EN1057 for above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240604008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Hailiang & size on body

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

EKYA00103 MALE CONNECTOR CXM - 15mmxR 1/2 EKYA00157 MALE CONNECTOR CXM - 15mmxR 3/4 EKYA00115 MALE CONNECTOR CXM - 22mmxR 1/2 EKYA00104 MALE CONNECTOR CXM - 22mmxR 3/4 EKYA00116 MALE CONNECTOR CXM - 22mmxR 1 EKYA00117 MALE CONNECTOR CXM - 28mmxR 3/4 EKYA00105 MALE CONNECTOR CXM - 28mmxR 1 EKYA00118 MALE CONNECTOR CXM - 35mmxR 1 EKYA00106 MALE CONNECTOR CXM - 35mmxR 1 1/4 EKYA00107 MALE CONNECTOR CXM - 42mmxR 1 1/2 EKYA00108 MALE CONNECTOR CXM - 54mmxR 2 EKYA00109 MALE CONNECTOR CXM - 66.7mmxR 2 1/2 EKYA00110 MALE CONNECTOR CXM - 76.1mmxR 2 1/2 EKYA00111 MALE CONNECTOR CXM - 76.1mmxR 3 EKYA00303 FEMALE CONNECTOR CXF - 15mmxRp 1/2 EKYA00357 FEMALE CONNECTOR CXF - 15mmxRp 3/4 EKYA00315 FEMALE CONNECTOR CXF - 22mmxRp 1/2 EKYA00304 FEMALE CONNECTOR CXF - 22mmxRp 3/4 EKYA00316 FEMALE CONNECTOR CXF - 22mmxRp 1 EKYA00317 FEMALE CONNECTOR CXF - 28mmxRp 3/4 EKYA00305 FEMALE CONNECTOR CXF - 28mmxRp 1 EKYA00318 FEMALE CONNECTOR CXF - 35mmxRp 1 EKYA00306 FEMALE CONNECTOR CXF - 35mmxRp 1 1/4 EKYA00307 FEMALE CONNECTOR CXF - 42mmxRp 1 1/2 EKYA00308 FEMALE CONNECTOR CXF - 54mmxRp 2 EKYA00309 FEMALE CONNECTOR CXF - 66.7mmxRp 2 1/2 EKYA00310 FEMALE CONNECTOR CXF - 76.1mmxRp 2 1/2 EKYA00311 FEMALE CONNECTOR CXF - 76.1mmxRp 3 EKYA10103 MALE ELBOW CXM - 15mmxR 1/2 EKYA10104 MALE ELBOW CXM - 22mmxR 3/4 EKYA10105 MALE ELBOW CXM - 28mmxR 1 EKYA10106 MALE ELBOW CXM - 35mmxR 1 1/4 EKYA10107 MALE ELBOW CXM - 42mmxR 1 1/2 EKYA10108 MALE ELBOW CXM - 54mmxR 2 EKYA10303 FEMALE ELBOW CXF - 15mmxRp 1/2 EKYA10304 FEMALE ELBOW CXF - 22mmxRp 3/4 EKYA10305 FEMALE ELBOW CXF - 28mmxRp 1 EKYA10306 FEMALE ELBOW CXF - 35mmxRp 1 1/4 EKYA10307 FEMALE ELBOW CXF - 42mmxRp 1 1/2 EKYA10308 FEMALE ELBOW CXF - 54mmxRp 2 EKYA10803 WALLPLATE ELBOW - 15mmxRp 1/2 EKYA10804 WALLPLATE ELBOW - 22mmxRp ¾ EKYA01003 UNION COUPLING CXC - 15mm EKYA01004 UNION COUPLING CXC - 22mm EKYA01005 UNION COUPLING CXC - 28mm EKYA01006 UNION COUPLING CXC - 35mm EKYA01007 UNION COUPLING CXC - 42mm EKYA01008 UNION COUPLING CXC - 54mm EKYA20303 FEMALE TEE CXCXF - 15mmx15mmxRp 1/2 EKYA20315 FEMALE TEE CXCXF - 22mmx22mmxRp 1/2 EKYA20304 FEMALE TEE CXCXF - 22mmx22mmxRp 3/4 EKYA20316 FEMALE TEE CXCXF - 28mmx28mmxRp 1/2 EKYA20317 FEMALE TEE CXCXF - 28mmx28mmxRp 3/4 EKYA20305 FEMALE TEE CXCXF - 28mmx28mmxRp 1 EKYA20318 FEMALE TEE CXCXF - 35mmx35mmxRp 1/2 EKYA20319 FEMALE TEE CXCXF - 35mmx35mmxRp 3/4 EKYA20320 FEMALE TEE CXCXF - 35mmx35mmxRp 1 EKYA20306 FEMALE TEE CXCXF - 35mmx35mmxRp 1 1/4 EKYA20321 FEMALE TEE CXCXF - 42mmx42mmxRp 1/2 EKYA20322 FEMALE TEE CXCXF - 42mmx42mmxRp 3/4 EKYA20323 FEMALE TEE CXCXF - 42mmx42mmxRp 1 EKYA20307 FEMALE TEE CXCXF - 42mmx42mmxRp 1 1/2 EKYA20324 FEMALE TEE CXCXF - 54mmx54mmxRp 1/2 EKYA20325 FEMALE TEE CXCXF - 54mmx54mmxRp 1 EKYA20308 FEMALE TEE CXCXF - 54mmx54mmxRp 2 EKYA01303 STRAIGHT SWIVEL CONNECTOR CXF - 15mmxG 1/2 EKYA01357 STRAIGHT SWIVEL CONNECTOR CXF - 15mmxG 3/4 EKYA01304 STRAIGHT SWIVEL CONNECTOR CXF - 22mmxG 3/4 EKYA01315 STRAIGHT SWIVEL CONNECTOR CXF - 22mmxG 1 EKYA01316 STRAIGHT SWIVEL CONNECTOR CXF - 28mmxG 1 1/4 EKYA01317 STRAIGHT SWIVEL CONNECTOR CXF - 35mmxG 1 1/2 EKYA01318 STRAIGHT SWIVEL CONNECTOR CXF - 42mmxG 2 EKYA01203 STRAIGHT MALE UNION CXM - 15mmxR 1/2 EKYA01257 STRAIGHT MALE UNION CXM - 15mmxR 3/4 EKYA01215 STRAIGHT MALE UNION CXM - 22mmxR 1/2 EKYA01204 STRAIGHT MALE UNION CXM - 22mmxR 3/4 EKYA01216 STRAIGHT MALE UNION CXM - 22mmxR 1 EKYA01217 STRAIGHT MALE UNION CXM - 28mmxR 3/4 EKYA01205 STRAIGHT MALE UNION CXM - 28mmxR 1 EKYA01206 STRAIGHT MALE UNION CXM - 35mmxR 1 1/4 EKYA01207 STRAIGHT MALE UNION CXM - 42mmxR 1 1/2 EKYA01208 STRAIGHT MALE UNION CXM - 54mmxR 2 EKYA01103 STRAIGHT FEMALE UNION CXF - 15mmxRp 1/2 EKYA01157 STRAIGHT FEMALE UNION CXF - 15mmxRp 3/4 EKYA01115 STRAIGHT FEMALE UNION CXF - 22mmxRp 1/2 EKYA01104 STRAIGHT FEMALE UNION CXF - 22mmxRp 3/4 EKYA01116 STRAIGHT FEMALE UNION CXF - 22mmxRp 1 EKYA01117 STRAIGHT FEMALE UNION CXF - 28mmxRp 3/4 EKYA01105 STRAIGHT FEMALE UNION CXF - 28mmxRp 1 EKYA01106 STRAIGHT FEMALE UNION CXF - 35mmxRp 1 1/4 EKYA01107 STRAIGHT FEMALE UNION CXF - 42mmxRp 1 1/2 EKYA01108 STRAIGHT FEMALE UNION CXF - 54mmxRp 2

Product Images

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

SANHA Press Series 6000 & 16000 and PURAPRESS Series 8000 of press-fit fittings with copper (6000), bronze (8000) and chrome plated copper (16000) bodies and EPDM `O`-rings. For use with copper pipe manufactured in accordance with BS EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240602058

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Sizes are in mm Pressfit

Marking:

Sanha logo, Size and CuSi on body

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

SANHA Press Series 6000: SANHA-Press Bend 90° M/F: 16001A12: 12. 16001A14: 14. 16001A15: 15. 16001A16: 16. 16001A18: 18. 16001A22: 22. 16001A28: 28. 16001A35: 35. 16001A76: 76,1. 16001A89: 88,9. 16001A108: 108,0. 16001L15: 15. SANHA-Press Bend 90° F/F: 16002A12: 12. 16002A14: 14. 16002A15: 15. 16002A16: 16. 16002A18: 18. 16002A22: 22. 16002A28: 28. 16002A76: 76,1. 16002A89: 88,9. 16002A108: 108,0. SANHA-Press Bend 45° M/F: 1604012: 12. 1604014: 14. 1604015: 15. 1604016: 16. 1604018: 18. 1604022: 22. 1604028: 28. 1604076: 76,1. 1604089: 88,9. 16040108: 108,0. SANHA-Press Bend 45° F/F: 1604112: 12. 1604114: 14. 1604115: 15. 1604116: 16. 1604118: 18. 1604122: 22. 1604128: 28. 1604176: 76,1. 1604189: 88,9. 16041108: 108,0. SANHA-Press Full Crossover: 1608512: 12. 1608514: 14. 1608515: 15. 1608516: 16. 1608518: 18. 1608522: 22. 1608528: 28. SANHA-Press Partial crossover: 1608612: 12. 1608614: 14. 1608615: 15. 1608616: 16. 1608618: 18. 1608622: 22. 1608628: 28. SANHA-Press Tee: 1613012: 12. 1613014: 14. 1613015: 15. 1613016: 16. 1613018: 18. 1613022: 22. 1613028: 28. 1613076: 76,1. 1613089: 88,9. 16130108: 108,0. SANHA-Press Tee: 16130121512: 12x15x12. 16130141214: 14x12x14. 16130151212: 15x12x12. 16130151215: 15x12x15. 16130151512: 15x15x12. 16130151815: 15x18x15. 16130152215: 15x22x15. 16130161216: 16x12x16. 16130161414: 16x14x14. 16130161416: 16x14x16. 16130181215: 18x12x15. 16130181218: 18x12x18. 16130181418: 18x14x18. 16130181515: 18x15x15. 16130181518: 18x15x18. 16130181618: 18x16x18. 16130181815: 18x18x15. 16130182218: 18x22x18. 16130221222: 22x12x22. 16130221422: 22x14x22. 16130221515: 22x15x15. 16130221518: 22x15x18. 16130221522: 22x15x22. 16130221622: 22x16x22. 16130221815: 22x18x15. 16130221818: 22x18x18. 16130221822: 22x18x22. 16130222215: 22x22x15. 16130222218: 22x22x18. 16130222822: 22x28x22. 16130281428: 28x14x28. 16130281522: 28x15x22. 16130281528: 28x15x28. 16130281628: 28x16x28. 16130281822: 28x18x22. 16130281828: 28x18x28. 16130282222: 28x22x22. 16130282228: 28x22x28. 16130282815: 28x28x15. 16130282818: 28x28x18. 16130282822: 28x28x22. 16130283528: 28x35x28. 16130762276: 76,1x22x76,1. 16130762876: 76,1x28x76,1. 16130897689: 88,9x76,1x88,9. 1613010876108: 108,0x76,1x108,0. 1613010889108: 108,0x88,9x108,0. 16130L15: 15. SANHA-Press Reducing coupling: 162401412: 14x12. 162401512: 15x12. 162401514: 15x14. 162401614: 16x14. 162401812: 18x12. 162401814: 18x14. 162401815: 18x15. 162401816: 18x16. 162402214: 22x14. 162402215: 22x15. 162402216: 22x16. 162402218: 22x18. 162402815: 28x15. 162402818: 28x18. 162402822: 28x22. SANHA-Press Reducer: 162431412: 14ax12. 162431512: 15ax12. 162431612: 16ax12. 162431614: 16ax14. 162431812: 18ax12. 162431814: 18ax14. 162431815: 18ax15. 162431816: 18ax16. 162432214: 22ax14. 162432215: 22ax15. 162432216: 22ax16. 162432218: 22ax18. 162432815: 28ax15. 162432816: 28ax16. 162432818: 28ax18. 162432822: 28ax22. 162438976: 88,9ax76,1. 1624310876: 108,0ax76,1. 1624310889: 108,0ax88,9. SANHA-Press Coupling: 1627012: 12. 1627014: 14. 1627015: 15. 1627016: 16. 1627018: 18. 1627022: 22. 1627028: 28. 1627076: 76,1. 1627089: 88,9. 16270108: 108,0. SANHA-Press End Cap: 1630112: 12. 1630114: 14. 1630115: 15. 1630116: 16. 1630118: 18. 1630122: 22. 1630128: 28. 1630176: 76,1. 1630189: 88,9. 16301108: 108,0. SANHA-Press Slip coupling: 16270S12: 12. 16270S15: 15. 16270S18: 18. 16270S22: 22. 16270S28: 28. 16270S76: 76,1. 16270S89: 88,9. 16270S108: 108,0. SANHA-Press Coupling: 1627012: 12. 1627014: 14. 1627015: 15. 1627016: 16. 1627018: 18. 1627022: 22. 1627028: 28. 1627076: 76,1. 1627089: 88,9. 16270108: 108,0 Models added September 2024 PuraPress series 6000: SANHA-Press Bend 90° M/F: 16001A35: 35. 16001A42: 42. 16001A54: 54. 16001A64: 64. 16001A67: 67. SANHA-Press Bend 90° F/F: 16002A35: 35. 16002A42: 42. 16002A54: 54. 16002A64: 64. 16002A67: 67. SANHA-Press Bend 45° M/F: 1604035: 35. 1604042: 42. 1604054: 54. 1604064: 64. 1604067: 67. SANHA-Press Bend 45° F/F: 1604135: 35. 1604142: 42. 1604154: 54. 1604164: 64. 1604167: 67. SANHA-Press Tee: 1613035: 35. 1613042: 42. 1613054: 54. 1613064: 64. 1613067: 67. SANHA-Press Tee: 16130351535: 35x15x35. 16130351835: 35x18x35. 16130352222: 35x22x22. 16130352228: 35x22x28. 16130352235: 35x22x35. 16130352828: 35x28x28. 16130352835: 35x28x35. 16130353522: 35x35x22. 16130353528: 35x35x28. 16130421542: 42x15x42. 16130422242: 42x22x42. 16130422842: 42x28x42. 16130423535: 42x35x35. 16130423542: 42x35x42. 16130542254: 54x22x54. 16130542854: 54x28x54. 16130543554: 54x35x54. 16130544254: 54x42x54. 16130644264: 64x42x64. 16130645464: 64x54x64. 16130672867: 67x28x67. 16130673567: 67x35x67. 16130674267: 67x42x67. 16130675467: 67x54x67. 16130763576: 76,1x35x76,1. 16130764276: 76,1x42x76,1. 16130765476: 76,1x54x76,1. 16130766476: 76,1x64x76,1. 16130766776: 76,1x67x76,1. 16130895489: 88,9x54x88,9. 16130896489: 88,9x64x88,9. 1613010854108: 108,0x54x108,0. 1613010864108: 108,0x64x108,0. 1613010867108: 108,0x67x108,0. SANHA-Press Reducing coupling: 162403522: 35x22. 162403528: 35x28. 162404222: 42x22. 162404228: 42x28. 162404235: 42x35. 162405428: 54x28. 162405435: 54x35. 162405442: 54x42. SANHA-Press Reducer: 162433522: 35ax22. 162433528: 35ax28. 162434222: 42ax22. 162434228: 42ax28. 162434235: 42ax35. 162435435: 54ax35. 162435442: 54ax42. 162436442: 64ax42. 162436454: 64ax54. 162436728: 67ax28. 162436735: 67ax35. 162436742: 67ax42. 162436754: 67ax54. 162437635: 76,1ax35. 162437642: 76,1ax42. 162437654: 76,1ax54. 162437667: 76,1ax67. 162438954: 88,9ax54. 162438964: 88,9ax64. 1624310842: 108,0ax42. 1624310854: 108,0ax54. 1624310864: 108,0ax64. 1624310867: 108,0ax67. SANHA-Press Coupling: 1627035: 35. 1627042: 42. 1627054: 54. 1627064: 64. 1627067: 67. SANHA-Press Slip coupling: 16270S35: 35. 16270S42: 42. 16270S54: 54. 16270S64: 64. 16270S67: 67. SANHA-Press End Cap: 1630135: 35. 1630142: 42. 1630154: 54. 1630164: 64. 1630167: 67. SANHA-Press Crimping flange PN 10/16: 1BMPF42: DN 40 / 42 mm. 1BMPF54: DN 50 / 54 mm. 1BMPF67: DN -- / 66,7 mm. 1BMPF76: DN 65 / 76,1 mm. 1BMPF76_DN80: DN 80 / 76,1 mm. 1BMPF89: DN 80 / 88,9 mm. PuraPress series 8000: PURAPRESS Female elbow 90°: 18090221: 22x1. 18090281: 28x1. 1809035114: 35x11/4. 1809042112: 42x11/2. 18090542: 54x2. PURAPRESS Male elbow 90°: 18092221: 22x1. 18092281: 28x1. 1809235114: 35x11/4. 1809242112: 42x11/2. 18092542: 54x2. PURAPRESS Union elbow, flat sealing: 18096221: 22x1. 18096281: 28x1 1809635114: 35x11/4. 1809642112: 42x11/2. 18096542: 54x2. PURAPRESS Tee, female: 181303512: 35x1/2x35. 18130351: 35x1x35. 181304212: 42x1/2x42. 181305412: 54x1/2x54. PURAPRESS Male adaptor: 18243221: 22x1. 18243281: 28x1. 1824328114: 28x11/4. 18243351: 35x1. - 1824335114: 35x11/4. - 1824335112: 35x11/2. - 1824342114: 42x11/4. - 1824342112: 42x11/2. - 1824354112: 54x11/2. - 18243542: 54x2. - 1824364212: 64x21/2. - 1824367212: 67x21/2. - 1824376212: 76,1x21/2. -> PURAPRESS Plug-in adaptor, female: 18246281: 28ax1. 1824635114: 35ax11/4. 1824642112: 42ax11/2. 18246542: 54ax2. PURAPRESS Flow Check Coupling with 2 holes: 18270FC26712: 67x1/2. PURAPRESS Female adaptor: 18270221: 22x1. 18270281: 28x1. 1827028114: 28x11/4. 18270351: 35x1. 1827035114: 35x11/4. 1827035112: 35x11/2. 1827042114: 42x11/4. 1827042112: 42x11/2. 1827054112: 54x11/2. 18270542: 54x2. 1827064212: 64x21/2. 1827067212: 67x21/2. 1827076212: 76,1x21/2. PURAPRESS Plug-in adaptor, male: 18280221: 22ax1. 18280281: 28ax1. 1828035114: 35ax11/4. 1828042112: 42ax11/2. 18280542: 54ax2. PURAPRESS Union, flat sealing: 1833035: 35. 1833042: 42. 1833054: 54. THREADED PURAPRESS Union, female, flat seal.: 18330221: 22x1. 18330281: 28x1. 1833035114: 35x11/4. 1833042112: 42x11/2. 18330542: 54x2. PURAPRESS Union, male, flat sealing: 18333221: 22x1. 18333281: 28x1. 1833335114: 35x11/4. 1833342112: 42x11/2. 18333542: 54x2. PURAPRESS Union adaptor, flat seal.: 18359151: 15x1. 18359181: 18x1. 18359221: 22x1. 1835922114: 22x11/4. 1835922112: 22x11/2. 18359281: 28x1. 1835928114: 28x11/4. 1835928112: 28x11/2. 1835935112: 35x11/2. 18359352: 35x2. 1835942134: 42x13/4. 18359422: 42x2. 1835954238: 54x23/8. 18359763: 76,1x3. 1835989312: 88,9x31/2. PURAPRESS Flange PN10/16: 1PURAPF35: DN 32 / 35 mm. 1PURAPF42: DN 40 / 42 mm. 1PURAPF54: DN 50 / 54 mm. 1PURAPF64: DN -- / 64 mm. 1PURAPF67: DN -- / 67 mm. PuraPress series 16000: SANHA-Press Chrome Male adaptor: 116243G1212: 12x1/2. 116243G1512: 15x1/2. 116243G1812: 18x1/2. 116243G1834: 18x3/4. 116243G2212: 22x1/2. 116243G2234: 22x3/4. 116243G221: 22x1. 116243G2834: 28x3/4. 116243G281: 28x1 116243G28114: 28x11/4. SANHA-Press Chrome Female adaptor: 116270G1212: 12x1/2. 116270G1512: 15x1/2. 116270G1812: 18x1/2. 116270G1834: 18x3/4. 116270G2212: 22x1/2. 116270G2234: 22x3/4 116270G221: 22x1. 116270G2834: 28x3/4. 116270G281: 28x1. 116270G28114: 28x11/4. SANHA-Press Chrome Plug-in adaptor, male: 116280G1212: 12ax1/2. 116280G1512: 15ax1/2. 116280G1812: 18ax1/2. 116280G1834: 18ax3/4. 116280G2212: 22ax1/2. 116280G2234: 22ax3/4. 116280G2834: 28ax3/4. 116280G281: 28ax1. SANHA-Press Chrome Union adaptor, flat seal.: 116359G1212: 12x1/2. 116359G1534: 15x3/4. 116359G181: 18x1.

PuraPress series 8000: PURAPRESS Female elbow 90°: 180901238: 12x3/8. 180901212: 12x1/2. 180901412: 14x1/2. 180901538: 15x3/8. 180901512: 15x1/2. 180901534: 15x3/4. 180901612: 16x1/2. 180901812: 18x1/2. 180901834: 18x3/4. 180902212: 22x1/2. 180902234: 22x3/4. 180902812: 28x1/2. 180902834: 28x3/4. PURAPRESS Male elbow 90°: 180921238: 12x3/8. 180921212: 12x1/2. 180921412: 14x1/2. 180921538: 15x3/8. 180921512: 15x1/2. 180921612: 16x1/2. 180921812: 18x1/2. 180921834: 18x3/4. 180922212: 22x1/2. 180922234: 22x3/4. PURAPRESS Union elbow, flat sealing: 180961212: 12x1/2. 180961512: 15x1/2. 180961812: 18x1/2. 180961834: 18x3/4. 180962234: 22x3/4. PURAPRESS Tee, female: 181301212: 12x1/2x12. 181301412: 14x1/2x14. 181301538: 15x3/8x15. 181301512: 15x1/2x15. 181301612: 16x1/2x16. 181301812: 18x1/2x18. 181302212: 22x1/2x22. 181302234: 22x3/4x22. 181302812: 28x1/2x28. 181302834: 28x3/4x28. PURAPRESS Male adaptor: 182431238: 12x3/8. 182431212: 12x1/2. 182431438: 14x3/8. 182431412: 14x1/2. 182431538: 15x3/8. 182431512: 15x1/2. 182431534: 15x3/4. 182431612: 16x1/2. 182431634: 16x3/4. 182431812: 18x1/2. 182431834: 18x3/4. 182432212: 22x1/2. 182432234: 22x3/4. 182432834: 28x3/4. 18243763: 76,1x3. 18243893: 88,9x3. 182431084: 108,0x4. PURAPRESS Plug-in adaptor, female: 182461212: 12ax1/2. 182461538: 15ax3/8. 182461512: 15ax1/2. 182461812: 18ax1/2. 182461834: 18ax3/4. 182462212: 22ax1/2. 182462234: 22ax3/4. 182462834: 28ax3/4. PURAPRESS Flow Check Coupling with 2 holes: 18270FC27612: 76,1x1/2. 18270FC38934: 88,9x3/4. 18270FC410834: 108,0x3/4. PURAPRESS Female adaptor: 182701238: 12x3/8. 182701212: 12x1/2. 182701438: 14x3/8. 182701412: 14x1/2. 182701538: 15x3/8. 182701512: 15x1/2. 182701534: 15x3/4. 182701612: 16x1/2. 182701634: 16x3/4. 182701812: 18x1/2. 182701834: 18x3/4. 182702212: 22x1/2. 182702234: 22x3/4. 182702834: 28x3/4. 18270893: 88,9x3. PURAPRESS Plug-in adaptor, male: 182801212: 12ax1/2. 182801538: 15ax3/8. 182801512: 15ax1/2. 182801812: 18ax1/2. 182801834: 18ax3/4. 182802212: 22ax1/2. 182802234: 22ax3/4. 182802834: 28ax3/4. PURAPRESS Union, flat sealing: 1833015: 15. 1833018: 18. 1833022: 22. 1833028: 28. PURAPRESS Union, female, flat seal.: 183301512: 15x1/2. 183301534: 15x3/4. 183301812: 18x1/2. 183301834: 18x3/4. 183302234: 22x3/4. 183302834: 28x3/4. PURAPRESS Union, male, flat sealing: 183331238: 12x3/8. 183331212: 12x1/2. 183331512: 15x1/2. 183331534: 15x3/4. 183331812: 18x1/2. 183331834: 18x3/4. 183332212: 22x1/2. 183332234: 22x3/4. 183332834: 28x3/4. PURAPRESS Union adaptor, flat seal.: 183591212: 12x1/2. 183591234: 12x3/4. 183591438: 14x3/8. 183591412: 14x1/2. 183591538: 15x3/8. 183591512: 15x1/2. 183591534: 15x3/4. 183591634: 16x3/4. 183591834: 18x3/4. 183592234: 22x3/4. PURAPRESS Wall Plate, female end and female thread: 184721212: 12x1/2. 184721412: 14x1/2. 184721512: 15x1/2. 184721612: 16x1/2. 184721812: 18x1/2. 184721834: 18x3/4. 184722212: 22x1/2. 184722234: 22x3/4. PURAPRESS Wall plate with universal flange, with female end and female thread: 184731512: 15x1/2. 184732234: 22x3/4. PURAPRESS Double wall plate, both sides female end and female thread: 18478GZ151215: 15x1/2x15. 18478GZ151216: 15x1/2x16. 18478GZ151218: 15x1/2x18. 18478GZ151222: 15x1/2x22. 18478GZ161216: 16x1/2x16. 18478GZ161218: 16x1/2x18. 18478GZ161222: 16x1/2x22. 18478GZ181215: 18x1/2x15. 18478GZ181218: 18x1/2x18. 18478GZ181222: 18x1/2x22. 18478GZ221215: 22x1/2x15. 18478GZ221218: 22x1/2x18. 18478GZ221222: 22x1/2x22. PURAPRESS Mounting unit, female solder ends and female threads: 189761512: 15x1/2. PURAPRESS Installation set for fastening wall plates: 18980G1512: 15x1/2. 18980G1812: 18x1/2. 18980G2212: 22x1/2. PURAPRESS Installation set for fastening double wall plates: 18981G151215: 15x1/2x15. 18981G151218: 15x1/2x18. 18981G151222: 15x1/2x22. 18981G181215: 18x1/2x15. 18981G181218: 18x1/2x18. 18981G181222: 18x1/2x22. 18981G221215: 22x1/2x15. 18981G221218: 22x1/2x18. 18981G221222: 22x1/2x22. PURAPRESS Flange PN10/16: 1PURAPF28: DN 25 / 28 mm. 1PURAPF76: DN 65 / 76,1 mm. 1PURAPF76_DN80: DN 80 / 76,1 mm. 1PURAPF89: DN 80 / 88,9 mm. 1PURAPF108: DN 100 / 108,0 mm. SANHA Press Series 16000: SANHA-Press Chrom Bend 90° M/F: 116001A12: 12. 116001A15: 15. 116001A18: 18. 116001A22: 22. 116001A28: 28. SANHA-Press Chrom Bend 90° F/F: 116002A12: 12. 116002A15: 15. 116002A18: 18. 116002A22: 22. 116002A28: 28. SANHA-Press Chrom Bend 45° M/F: 11604012: 12. 11604015: 15. 11604018: 18. 11604022: 22. 11604028: 28. SANHA-Press Chrom Bend 45° F/F: 11604112: 12. 11604115: 15. 11604118: 18. 11604122: 22. 11604128: 28. SANHA-Press Chrom Full Crossover: 11608512: 12. 11608515: 15. 11608518: 18. 11608522: 22. 11608528: 28. SANHA-Press Chrom Partial crossover: 11608612: 12. 11608615: 15. 11608618: 18. 11608622: 22. 11608628: 28. SANHA-Press Chrom Tee: 11613012: 12. 11613015: 15. 11613018: 18. 11613022: 22. 11613028: 28. 116130121512: 12x15x12. 116130151212: 15x12x12. 116130151215: 15x12x15. 116130151512: 15x15x12. 116130181218: 18x12x18. 116130181515: 18x15x15. 116130181518: 18x15x18. 116130181815: 18x18x15. 116130182218: 18x22x18. 116130221222: 22x12x22. 116130221515: 22x15x15. 116130221522: 22x15x22. 116130221818: 22x18x18. 116130221822: 22x18x22. 116130222215: 22x22x15. 116130222218: 22x22x18. 116130222822: 22x28x22. 116130281522: 28x15x22. 116130281528: 28x15x28. 116130282222: 28x22x22. 116130282228: 28x22x28. 116130282815: 28x28x15. 116130282822: 28x28x22. SANHA-Press Chrom Reducing coupling: 1162401512: 15x12. 1162401812: 18x12. 1162401815: 18x15. 1162402215: 22x15. 1162402218: 22x18. 1162402815: 28x15. 1162402822: 28x22. SANHA-Press Chrom Reducer: 1162431512: 15ax12. 1162431812: 18ax12. 1162431815: 18ax15. 1162432215: 22ax15. 1162432218: 22ax18. 1162432815: 28ax15. 1162432822: 28ax22. SANHA-Press Chrom Male adaptor: 116243G1238: 12x3/8. 116243G1538: 15x3/8. SANHA-Press Chrom Coupling: 11627012: 12. 11627015: 15. 11627018: 18. 11627022: 22. 11627028: 28. SANHA-Press Chrom Female adaptor: 116270G1238: 12x3/8. 116270G1538: 15x3/8. SANHA-Press Chrom Slip coupling: 116270S12: 12. 116270S15: 15. 116270S18: 18. 116270S22: 22. 116270S28: 28. SANHA-Press Chrom Plug-in adaptor, male: 116280G1538: 15ax3/8.

Product Images

Approval Holder:

SANHA GmbH & Co. KG

Company Name

SANHA GmbH & Co. KG

Address

Im Teelbruch 80 Essen

Postcode

45219

Country

Germany

Phone

+32499361070

General Email

nicolas.verspecht@sanha.com

View All Listings by this Company

Manufacturer:

SANHA GmbH & Co. KG

Company Name

SANHA GmbH & Co. KG

Address

Im Teelbruch 80 Essen

Postcode

45219

Country

Germany

Phone

+32499361070

General Email

nicolas.verspecht@sanha.com

View All Listings by this Company

Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101377

Size:

see model

Marking:

JD PRESS, JD logo, WRAS, date of manufacture MM/YY and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

JDF22015SS STRAIGHT COUPLING 15mm JDF22018SS STRAIGHT COUPLING 18mm JDF22022SS STRAIGHT COUPLING 22mm JDF22028SS STRAIGHT COUPLING 28mm JDF22035SS STRAIGHT COUPLING 35mm JDF22042SS STRAIGHT COUPLING 42mm JDF22054SS STRAIGHT COUPLING 54mm JDF22115SS SLIP COUPLING 15mm JDF22118SS SLIP COUPLING 18mm JDF22122SS SLIP COUPLING 22mm JDF22128SS SLIP COUPLING 28mm JDF22135SS SLIP COUPLING 35mm JDF22142SS SLIP COUPLING 42mm JDF22154SS SLIP COUPLING 54mm JDF9015SS 90 DEG ELBOW 15mm JDF9018SS 90 DEG ELBOW 18mm JDF9022SS 90 DEG ELBOW 22mm JDF9028SS 90 DEG ELBOW 28mm JDF9035SS 90 DEG ELBOW 35mm JDF9042SS 90 DEG ELBOW 42mm JDF9054SS 90 DEG ELBOW 54mm JDF9215SS 90 DEG M&F ELBOW 15mm JDF9218SS 90 DEG M&F ELBOW 18mm JDF9222SS 90 DEG M&F ELBOW 22mm JDF9228SS 90 DEG M&F ELBOW 28mm JDF9235SS 90 DEG M&F ELBOW 35mm JDF9242SS 90 DEG M&F ELBOW 42mm JDF9254SS 90 DEG M&F ELBOW 54mm JDF12015SS 45 DEG ELBOW 15mm JDF12018SS 45 DEG ELBOW 18mm JDF12022SS 45 DEG ELBOW 22mm JDF12028SS 45 DEG ELBOW 28mm JDF12035SS 45 DEG ELBOW 35mm JDF12042SS 45 DEG ELBOW 42mm JDF12054SS 45 DEG ELBOW 54mm JDF12115SS 45 DEG M&F ELBOW 15mm JDF12118SS 45 DEG M&F ELBOW 18mm JDF12122SS 45 DEG M&F ELBOW 22mm JDF12128SS 45 DEG M&F ELBOW 28mm JDF12135SS 45 DEG M&F ELBOW 35mm JDF12142SS 45 DEG M&F ELBOW 42mm JDF12154SS 45 DEG M&F ELBOW 54mm JDF13015SS TEE 15mm JDF13018SS TEE 18mm JDF13022SS TEE 22mm JDF13028SS TEE 28mm JDF13035SS TEE 35mm JDF13042SS TEE 42mm JDF13054SS TEE 54mm JDF13018X15SS REDUCING TEE 18mmx15mm JDF13022X15SS REDUCING TEE 22mmx15mm JDF13022X18SS REDUCING TEE 22mmx18mm JDF13028X15SS REDUCING TEE 28mmx15mm JDF13028X18SS REDUCING TEE 28mmx18mm JDF13028X22SS REDUCING TEE 28mmx22mm JDF13035X15SS REDUCING TEE 35mmx15mm JDF13035X18SS REDUCING TEE 35mmx18mm JDF13035X22SS REDUCING TEE 35mmx22mm JDF13035X28SS REDUCING TEE 35mmx28mm JDF13042X15SS REDUCING TEE 42mmx15mm JDF13042X18SS REDUCING TEE 42mmx18mm JDF13042X22SS REDUCING TEE 42mmx22mm JDF13042X28SS REDUCING TEE 42mmx28mm JDF13042X35SS REDUCING TEE 42mmx35mm JDF13054X15SS REDUCING TEE 54mmx15mm JDF13054X18SS REDUCING TEE 54mmx18mm JDF13054X22SS REDUCING TEE 54mmx22mm JDF13054X28SS REDUCING TEE 54mmx28mm JDF13054X35SS REDUCING TEE 54mmx35mm JDF13054X42SS REDUCING TEE 54mmx42mm JDF1315X1/2BSPSS FEMALE ADAPTER 15mm×Rp1/2’’ JDF1322X3/4BSPSS FEMALE ADAPTER 22mm×Rp3/4” JDF1328X1BSPSS FEMALE ADAPTER 28mm×Rp1” JDF1335X11/4BSPSS FEMALE ADAPTER 35mm×Rp1‐1/4” JDF1342X11/2BSPSS FEMALE ADAPTER 42mm×Rp1‐1/2” JDF1354X2BSPSS FEMALE ADAPTER 54mm×Rp2” JDF1215X1/2BSPSS STRAIGHT SWIVEL CONNECTOR 15mm×G1/2” JDF1218X1/2BSPSS STRAIGHT SWIVEL CONNECTOR 18mm×G1/2” JDF1222X3/4BSPSS STRAIGHT SWIVEL CONNECTOR 22mm×G3/4” JDF1228X1BSPSS STRAIGHT SWIVEL CONNECTOR 28mm×G1” JDF1235X11/4BSPSS STRAIGHT SWIVEL CONNECTOR 35mm×G1‐1/4” JDF1242X11/2BSPSS STRAIGHT SWIVEL CONNECTOR 42mm×G1‐1/2” JDF1254X2BSPSS STRAIGHT SWIVEL CONNECTOR 54mm×G2” JDF1415X1/2BSPTSS MALE ADAPTER 15mm×R1/2” JDF1418X1/2BSPTSS MALE ADAPTER 18mm×R1/2” JDF1422X3/4BSPTSS MALE ADAPTER 22mm×R3/4” JDF1428X1BSPTSS MALE ADAPTER 28mm×R1” JDF1435X11/4BSPTSS MALE ADAPTER 35mm×R1‐1/4” JDF1442X11/2BSPTSS MALE ADAPTER 42mm×R1‐1/2” JDF1454X2BSPTSS MALE ADAPTER 54mm×R2” JDF2115X1/2BSPSS Female elbow 15mm×Rp1/2” JDF2118X1/2BSPSS Female elbow 18mm×Rp1/2” JDF2122X3/4BSPSS Female elbow 22mm×Rp3/4” JDF2128X1BSPSS Female elbow 28mm×Rp1” JDF2135X11/4BSPSS Female elbow 35mm×Rp1‐1/4” JDF2142X11/2BSPSS Female elbow 42mm×Rp1‐1/2” JDF2154X2BSPSS Female elbow 54mm×Rp2” JDF2315X1/2BSPTSS Male elbow 15mm×R1/2” JDF2318X1/2BSPTSS Male elbow 18mm×R1/2” JDF2322X1/2BSPTSS Male elbow 22mm×R1/2” JDF2322X3/4BSPTSS Male elbow 22mm×R3/4” JDF2328X1BSPTSS Male elbow 28mm×R1” JDF2335X11/4BSPTSS Male elbow 35mm×R1‐1/4” JDF2342X11/2BSPTSS Male elbow 42mm×R1‐1/2” JDF2354X2BSPTSS Male elbow 54mm×R2” JDF13115X1/2BSPSS PRESS X BSP TEE 15mm×Rp1/2” JDF13118X1/2BSPSS PRESS X BSP TEE 18mm×Rp1/2” JDF13122X3/4BSPSS PRESS X BSP TEE 22mm×Rp3/4” JDF13128X1/2BSPSS PRESS X BSP TEE 28mm×Rp1/2 JDF13128X1BSPSS PRESS X BSP TEE 28mm×Rp1” JDF13135X11/4BSPSS PRESS X BSP TEE 35mm×Rp1‐1/4” JDF13142X11/2BSPSS PRESS X BSP TEE 42mm×Rp1‐1/2” JDF13154X2BSPSS PRESS X BSP TEE 54mm×Rp2” JDF2515X1/2BSPTSS PRESS X BSPT TEE 15mm×R1/2” JDF2518X1/2BSPTSS PRESS X BSPT TEE 18mm×R1/2” JDF2522X3/4BSPTSS PRESS X BSPT TEE 22mm×R3/4” JDF2528X1/2BSPTSS PRESS X BSPT TEE 28 mm×R1/2’’ JDF2528X1BSPTSS PRESS X BSPT TEE 28mm×R1” JDF2535X11/4BSPTSS PRESS X BSPT TEE 35mm×R1‐1/4” JDF2542X11/2BSPTSS PRESS X BSPT TEE 42mm×R1‐1/2” JDF2554X2BSPTSS PRESS X BSPT TEE 54mm×R2” JDF2618X15SS Reducer-A 18mm×15mm JDF2622X15SS Reducer-A 22mm×15mm JDF2622X18SS Reducer-A 22mm×18mm JDF2628X15SS Reducer-A 28mm×15mm JDF2628X18SS Reducer-A 28mm×18mm JDF2628X22SS Reducer-A 28mm×22mm JDF2635X15SS Reducer-A 35mm×15mm JDF2635X18SS Reducer-A 35mm×18mm JDF2635X22SS Reducer-A 35mm×22mm JDF2635X28SS Reducer-A 35mm×28mm JDF2642X15SS Reducer-A 42mm×15mm JDF2642X18SS Reducer-A 42mm×18mm JDF2642X22SS Reducer-A 42mm×22mm JDF2642X28SS Reducer-A 42mm×28mm JDF2642X35SS Reducer-A 42mm×35mm JDF2654X42SS Reducer-A 54mm×42mm JDF24018X15SS COUPLING REDUCER 18mmx15mm JDF24022X15SS COUPLING REDUCER 22mmx15mm JDF24022X18SS COUPLING REDUCER 22mmx18mm JDF24028X15SS COUPLING REDUCER 28mmx15mm JDF24028X18SS COUPLING REDUCER 28mmx18mm JDF24028X22SS COUPLING REDUCER 28mmx22mm JDF24035X15SS COUPLING REDUCER 35mmx15mm JDF24035X18SS COUPLING REDUCER 35mmx18mm JDF24035X22SS COUPLING REDUCER 35mmx22mm JDF24035X28SS COUPLING REDUCER 35mmx28mm JDF24042X15SS COUPLING REDUCER 42mmx15mm JDF24042X18SS COUPLING REDUCER 42mmx18mm JDF24042X22SS COUPLING REDUCER 42mmx22mm JDF24042X28SS COUPLING REDUCER 42mmx28mm JDF24042X35SS COUPLING REDUCER 42mmx35mm JDF24054X15SS COUPLING REDUCER 54mmx15mm JDF24054X18SS COUPLING REDUCER 54mmx18mm JDF24054X22SS COUPLING REDUCER 54mmx22mm JDF24054X28SS COUPLING REDUCER 54mmx28mm JDF24054X35SS COUPLING REDUCER 54mmx35mm JDF24054X42SS COUPLING REDUCER 54mmx42mm

Approval Holder:

JD Fire Ltd.

Company Name

JD Fire Ltd.

Address

Wheatfield Works, Ashton Road, Oldham

Country

OL8 3HX

View All Listings by this Company

‘Tectite 316’ range of push-fit fittings with stainless steel bodies incorporating EPDM ‘O’-rings for use with stainless steel tube (Grade 316 manufactured to EN 10312). Maximum working pressure: Fittings 15mm to 28mm 10.0 bar. Fittings 35mm to 54mm 6.0 bar. Maximum operating temperature 90°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240702052

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models.

Marking:

Tectite 316 & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

15mm TS1/TS270 Coupling 18mm TS1/TS270 Coupling 22mm TS1/TS270 Coupling 28mm TS1/TS270 Coupling 35mm TS1/TS270 Coupling 42mm TS1/TS270 Coupling 54mm TS1/TS270 Coupling 15mm TS1S/TS270S Slip Coupling 18mm TS1S/TS270S Slip Coupling 22mm TS1S/TS270S Slip Coupling 28mm TS1S/TS270S Slip Coupling 15mm x 1/2" TS2/TS270G Connector 18mm x 3/4" TS2/TS270G Connector 18mm x 1/2" TS2/TS270G Connector 22mm x 3/4" TS2/TS270G Connector 22mm x 1/2" TS2/TS270G Connector 22mm x 1" TS2/TS270G Connector 28mm x 3/4" TS2/TS270G Connector 28mm x 1" TS2/TS270G Connector 35mm x 1 1/4" TS2/TS270G Connector 42mm x 1 1/2" TS2/TS270G Connector 54mm x 2" TS2/TS270G Connector 15mm x 1/2" TS3/TS243G Connector 18mm x 3/4" TS3/TS243G Connector 18mm x 1/2" TS3/TS243G Connector 22mm x 3/4" TS3/TS243G Connector 22mm x 1/2" TS3/TS243G Connector 28mm x 3/4" TS3/TS243G Connector 28mm x 1" TS3/TS243G Connector 35mm x 1 1/4" TS3/TS243G Connector 42mm x 1 1/2" TS3/TS243G Connector 54mm x 2" TS3/TS243G Connector 18 x 15mm TS6/TS243 Reducer 22 x 15mm TS6/TS243 Reducer 22 x 18mm TS6/TS243 Reducer 28 x 15mm TS6/TS243 Reducer 28 x 18mm TS6/TS243 Reducer 28 x 22mm TS6/TS243 Reducer 35 x 22mm TS6/TS243 Reducer 35 x 28mm TS6/TS243 Reducer 42 x 22mm TS6/TS243 Reducer 42 x 28mm TS6/TS243 Reducer 42 x 35mm TS6/TS243 Reducer 54 x 35mm TS6/TS243 Reducer 54 x 42mm TS6/TS243 Reducer 15mm TS12/TS090 Elbow 18mm TS12/TS090 Elbow 22mm TS12/TS090 Elbow 28mm TS12/TS090 Elbow 35mm TS12/TS090 Elbow 42mm TS12/TS090 Elbow 54mm TS12/TS090 Elbow 15mm TS12S/TS092 Street Elbow 18mm TS12S/TS092 Street Elbow 22mm TS12S/TS092 Street Elbow 28mm TS12S/TS092 Street Elbow 15mm x 1/2" TS13/TS092G Elbow 18mm x 1/2" TS13/TS092G Elbow 22mm x 3/4" TS13/TS092G Elbw , 28mm x 1" TS13/TS092G Elbow 15mm x 1/2" TS14/TS090G Elbow 18mm x 1/2" TS14/TS090G Elbow 18mm x 3/4" TS14/TS090G Elbow 22mm x 3/4" TS14/TS090G Elbow 28mm x 1" TS14/TS090G Elbow 15mm x 1/2" TS15/TS471G Backplate Elbow 18mm x 1/2" TS15/TS471G Backplate Elbow 22mm x 3/4" TS15/TS471G Backplate Elbow 15mm TS18/TS002A Slow Bend 18mm TS18/TS002A Slow Bend 22mm TS18/TS002A Slow Bend 28mm TS18/TS002A Slow Bend 35mm TS18/TS002A Slow Bend 42mm TS18/TS002A Slow Bend 54mm TS18/TS002A Slow Bend 15mm TS18S/TS001 Elbow 18mm TS18S/TS001 Elbow 22mm TS18S/TS001 Elbow 28mm TS18S/TS001 Elbow 15mm TS21/TS041 Obtuse Elbow 18mm TS21/TS041 Obtuse Elbow 22mm TS21/TS041 Obtuse Elbow 28mm TS21/TS041 Obtuse Elbow 35mm TS21/TS041 Obtuse Elbow 42mm TS21/TS041 Obtuse Elbow 54mm TS21/TS041 Obtuse Elbow 15mm TS21S/TS040 Obtuse Street Elbow 18mm TS21S/TS040 Obtuse Street Elbow 22mm TS21S/TS040 Obtuse Street Elbow 28mm TS21S/TS040 Obtuse Street Elbow 35mm TS21S/TS040 Obtuse Street Elbow 42mm TS21S/TS040 Obtuse Street Elbow 15mm TS24/TS130 Tee 18mm TS24/TS130 Tee 22mm TS24/TS130 Tee 28mm TS24/TS130 Tee 35mm TS24/TS130 Tee 42mm TS24/TS130 Tee 54mm TS24/TS130 Tee 18 x 18 x 15mm TS25/TS130 Tee 22 x 22 x 15mm TS25/TS130 Tee 22 x 22 x 18mm TS25/TS130 Tee 28 x 28 x 15mm TS25/TS130 Tee 28 x 28 x 18mm TS25/TS130 Tee 28 x 28 x 22mm TS25/TS130 Tee 35 x 35 x 15mm TS25/TS130 Tee 35 x 35 x 22mm TS25/TS130 Tee 35 x 35 x 28mm TS25/TS130 Tee 42 x 42 x 28mm TS25/TS130 Tee 54 x 54 x 22mm TS25/TS130 Tee 54 x 54 x 28mm TS25/TS130 Tee 15 x 15mm x 1/2" TS30/TS130G Tee 18 x 18mm x 1/2" TS30/TS130G Tee 22 x 22mm x 1/2" TS30/TS130G Tee 22 x 22mm x 3/4" TS30/TS130G Tee 28 x 28mm x 1/2" TS30/TS130G Tee 35 x 35mm x 1/2" TS30/TS130G Tee 42 x 42mm x 1/2" TS30/TS130G Tee 15mm TS61/TS301 Stop End 18mm TS61/TS301 Stop End 22mm TS61/TS301 Stop End 28mm TS61/TS301 Stop End 35mm TS61/TS301 Stop End 42mm TS61/TS301 Stop End 54mm TS61/TS301 Stop End 15mm x 1/2" TS62/TS062 Tap Connector 22mm x 3/4" TS62/TS062 Tap Connector

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Manufacturer:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of blue epoxy coated ductile iron dismantling fittings with EPDM sealing rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

240602033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 to DN1200 Flanged

Marking:

FAMAT, Sapag-valves.com, model and technical information on data plate on body

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

DJ1 Dismantling Joint

Product Images

Approval Holder:

SAPAG VALVES

Company Name

SAPAG VALVES

Address

2 rue du Marais HAM

Postcode

80400

Country

France

Phone

+33 (0)3 23 81 42 87

General Email

eric.vincent@sapag-valves.com

View All Listings by this Company

‘POD’ range of indirect and direct heat interface units providing space heating and instantaneous hot water. The heat transfer is generated via plate heat exchangers. The domestic hot water (DHW) circuit incorporates an adjustable temperature mixing valve. The indirect models incorporate an expansion vessel (on the CW inlet of the DHW circuit) and a pressure relief valve set at 3.0 bar (on the space heating circuit). The indirect models only are supplied with a temporary filling loop, which comprises of a stainless steel braided EPDM lined flexible hose assembly and a lever operated spherical valve for connection to the primary circuit. The angled cold water inlet incorporates an isolation valve and a branch to connect to the filling loop, which includes a double check valve assembly (verified by test, suitable for backflow protection against Fluid Category 3). Maximum working pressure for indirect units: Primary circuit: 16.0 bar. Space heating: 2.5 bar. Secondary circuit (DHW): 10.0 bar. Maximum working pressure for direct units: Primary circuit: 10.0 bar. Space heating: 10.0 bar. Secondary circuit (DHW): 10.0 bar. Maximum operating temperature for domestic hot water 65°C. Maximum operating temperature for central heating and primary circuit 85°C.

Section:

1350 Heat Exchangers

Size:

22mm copper pipe connection.

Marking:

Ideal Heating badge and model on adhesive label on front casing. Manufacturer, serial number, model number, pressure rating and other technical information on data label within appliance.

Installation Requirements:

R001 R140 R360

Expiry date:

30/04/2027

Model:

POD i305LOR POD i405LOR POD i505LOR POD i605LOR POD i705LOR

Approval Holder:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Manufacturer:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Range of water meters with cast iron bodies (blue epoxy coating) and EPDM ‘O’ rings. Maximum working pressure 16.0 Bar Maximum operating temperature 23.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 (200mm) & DN150 (500mm)

Marking:

SENSUS on cover. Cordonel, DN, Max pressure and other technical information on meter face. Size on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

GN Q3 40 – Cordonel DN50 (200mm) GN Q3 400 – Cordonel DN150 (500mm)

Approval Holder:

Sensus UK Systems Ltd

Company Name

Sensus UK Systems Ltd

Address

North Wing Central 40, Crockford Lane, Basingstoke, RG24 8GU

Country

Basingstoke

View All Listings by this Company

Manufacturer:

Sensus GmbH Hannover

Company Name

Sensus GmbH Hannover

Address

Meineckestrasse 10 Laatzen 30880 Germany

View All Listings by this Company