Range of modular silver and copper disinfection ion generators with a stainless-steel bodies Maximum working pressure 9.0 bar. Cold water use only.

Section:

2415 Water conditioners - Disinfectant ion generators

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP M

Marking:

Dosita, model and product info on data plate.

Installation Requirements:

R001 R160 R170 R290 R415

Expiry date:

31/07/2029

Model:

Ionsafe 1. Models added August 2024: Ionsafe 2, 3, 4, 5 & 6.

Product Images

Approval Holder:

Dosita Havuz Ve Su Teknolojilerileri

Company Name

Dosita Havuz Ve Su Teknolojilerileri

Address

Çiftlik Mah Bilgin caddesi no 34 Gölcük Kocaeli Türkiye

View All Listings by this Company

Manufacturer:

Dosita Havuz Ve Su Teknolojilerileri

Company Name

Dosita Havuz Ve Su Teknolojilerileri

Address

Çiftlik Mah Bilgin caddesi no 34 Gölcük Kocaeli Türkiye

View All Listings by this Company

Drinking water fountain, incorporating of spherical valve, self-closing tap and pressure reducing valve enclosed within a metal housing. Maximum working pressure 25.0 bar. For cold water use only.

Section:

2425 Water Fountain

Section Subtitle:

Drinking.

WRAS Approval Number:

240504711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F)

Marking:

Urbidermis on base of fountain.

Installation Requirements:

R001 R170 R415 R430 R435

Expiry date:

31/05/2029

Model:

Atlantida ATF+02

Product Images

Approval Holder:

Urbidermis, S.L. Grupo Santa

Company Name

Urbidermis, S.L. Grupo Santa

Address

Ctra. C-256 km5,6 ( Parc de Belloch ) 08430 - La Roca del Valles - Barcelona

Country

Spain

Phone

+34 938 619 137

General Email

info@urbidermis.com

View All Listings by this Company

‘Ultraform® N2320 Aqua AT UNCOLORED’ & 'Ultraform® N2320 003 AT UNCOLORED'. Uncoloured (appears white), injection moulded C-POM material. For use with water up to 65°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240755044

Expiry date:

31/07/2029

Approval Holder:

BASF SE

Company Name

BASF SE

Address

Carl-Bosch-Str. 38, 67056 Ludwigshafen

Country

Germany

View All Listings by this Company

'BPL High Build QD Bitu Black'. Factory applied, black coloured bituminous coating. Apply as per manufacturer’s data sheet ‘427-rev03’ dated 'Feb' 2024'. Cure: flash off for 15 minutes at ambient temperature of 30°C, followed by stoving at 55°C for 10 minutes and then 7 days maturation at ambient temperature of 30°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

240955013

Expiry date:

30/09/2029

Approval Holder:

Berger Paints India Limited

Company Name

Berger Paints India Limited

Address

14 & 15 Swarnamoyee Road, Howrah - 711103, West Bengal

Country

India

View All Listings by this Company

‘BFSC Foug SDN’. Factory applied, grey coloured, blast furnace slag cement intended to line pipes. Mix sand and cement in a mass ratio of 1.5:1, then add water in a water/cement mass ratio of 0.36:1 and apply as manufacturer's instructions. Cure for 48 hours@23°C, 70% relative humidity. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240755048

Expiry date:

31/07/2029

Approval Holder:

Saint-Gobain PAM CANALISATION

Company Name

Saint-Gobain PAM CANALISATION

Address

21, Avenue Camille Cavallier, 54700 Pont-à-Mousson

Country

France

View All Listings by this Company