Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240602065

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

Dolphin logo on end connections

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

Model Code: Dolphin Blue DB30abb.ccc.d.eee a’ indentifies the material type of the metal interlocked hose and threaded end connectors; these codes can be: o DB303bb. for brass material o DB304bb. for stainless steel material  ‘bb’ identifies the type of fitting/threaded connector at either end of the hose ranging from DB30a1. to DB30a11. Can be either one or two digits.  ‘ccc’ identifies the length range of the metal interlocked hose from 500mm ‘DB30abb.050’ to 2000mm ‘DB30abb.200’  ‘d’ identifies the external finish to the metal parts from ‘DB30abb.ccc.1 to DB30ab.ccc.9’: o ‘.1’ denotes brushed/satin polished o ‘.2’ denotes mirror polished o ‘.3’ denotes brushed/satin polished with PVD coating o ‘.4’ denotes mirror polished with PVD coating o ‘.5’ denotes powder coated o ‘.6 - .9’ to denote other material and finish options that may be available in the future  ‘eee’ indicates the colour of PVD or powder coat that has been applied from ‘DB30abb.ccc.d.00’ to ‘DB30abb.ccc.d.999’. Can be either two or three digits.

Product Images

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240602069

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

SHS on end connections.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

V165W-XX 1/2" Female Connection D17, V940W-XX 1/2" Female Connection D17, V941W-XX 1/2" Female Connection D17, V942W-XX 1/2" Female Connection D17. FXF2CX Trade Name Explanation: FX = Double interlock hose in brass or stainless steel F = TPS Inner Tube 2: Brass Rubber Holders C: WRAS Approved X: Connection Combinations, where X can be replaced with any of the following: A = ½” BSP (F) x ½” BSP (F) B = ½” BSP (F) x M15x1 F = ½” BSP (F) x 3/8” BSP (M) H = ½” BSP (F) x 3/8” BSP (F) I = M15x1 x M15x1 L = M15x1 x 3/8” BSP (M) M = M15x1 x 3/8” BSP (F) Q = 3/8” BSP (M) x 3/8” BSP (M) R = 3/8” BSP (M) x 3/8” BSP (F) S = 3/8” BSP (F) x 3/8” BSP (F) T = ½” BSP (F) x M12x1 AABBCCCC.DDD Trade Name Explanation: AA: identifies hose raw material and diameter, which can be replaced with any of the following: AC = Brass CW508L 022 External diameter 14 AD = Brass CW508L 026 External diameter 14 AQ = Brass CW508L 022 External diameter 15 AR = Brass CW508L 026 External diameter 15 AV = Brass CW508L 022 External diameter 17 AW = Brass CW508L 026 External diameter 17 AF = INOX AISI 304 External diameter 14 AS = INOX AISI 304 External diameter 15 AX = INOX AISI 304 External diameter 17 AJ = Brass CW 508L 022 External diameter 12 BB: identifies the type of external finish, and can be replaced with any of the following: CR = Chromed CZ = Brushed Chrome GM = Raw Brass NS = Brushed Nickel NZ = Brushed Nickel Phosphor IG = Raw INOX IS = Brushed INOX PO = PVD Gold PA = PVD Gold Brushed PG = PVD Black Metal PB = PVD Black Metal Brushed PH = PVD Champagne Brushed PR = PVD Copper Bronze PE = PVD Copper Bronze Brushed PI = PVD Grey 07 Brushed PK = PVD High Brass PQ = PVD High Brass Brushed PM = PVD Pale Gold Brushed PC = PVD Rose Gold Family Surface finishes: Raw, Chromed, Electropolished, Polished, Various Galvanics Finishing, Various PVD Finishing, Various Paint Finishing. CCCC: identifies the type of fittings, which can be replaced with any of the following: Any combination of (2) alphanumeric characters denoting only external aesthetic fittings dimensions. All of fittings are unwetted. DDD: identifies the length (between 50 and 200cm), and can be replaced with any of the following as examples: 050 = 50cm length, 100 = 100cm length, 150 = 150cm length, 200 = 200cm length.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of stainless-steel expansion joints with flanged or threaded end connections. For maximum working pressure please refer to model. Maximum operating temperature 100°C.

Section:

1870 Tubes

Section Subtitle:

Flexible - Metal.

WRAS Approval Number:

240704052

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Model number

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Threaded connections: Maximum working pressure 16.0 bar: JP20BS, JP20HS, JP250BS, JP250HS: ½", ¾”, 1”, 1¼”, 1½”, 2”, 2½” & 3” BSP (M). Flanged connections: Maximum working pressure 16.0 bar: JP251FS & JP251VS:15mm, 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm & 100mm. Maximum working pressure 14.0 bar. JP251FS & JP251VS:125mm. Maximum working pressure 8.0 bar: JP251FS & JP251VS: 200mm. Maximum working pressure 10.0 bar JP251FS & JP251VS: 150mm.

Approval Holder:

Stourflex Ltd

Company Name

Stourflex Ltd

Address

Junction Road Audnam Stourbridge

Postcode

DY8 4YH

Country

United Kingdom

Phone

+441384 393 329

General Email

james.croydon@stourflex.co.uk

View All Listings by this Company

Range of wall mounted thermostatic bar shower mixers with brass bodies, incorporating a thermostatic cartridge controlling the temperature and non-rising spindle headwork controlling the flow. The inlets incorporate stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240704010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” (F) captive nut

Marking:

Xindong logo on body

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2029

Model:

T43074T 19122WW 19658WW T43074B 18712WW 19641WW

Product Images

Approval Holder:

ZHEJIANG XINDONG SANITARY WARE CO.,LTD.

Company Name

ZHEJIANG XINDONG SANITARY WARE CO.,LTD.

Address

XUANMEN INDUSTRIAL ZONE YUHUAN CHINA

Country

CHINA

View All Listings by this Company

Manufacturer:

ZHEJIANG XINDONG SANITARY WARE CO.,LTD.

Company Name

ZHEJIANG XINDONG SANITARY WARE CO.,LTD.

Address

XUANMEN INDUSTRIAL ZONE YUHUAN CHINA

Country

CHINA

View All Listings by this Company

Exposed wall mounted bar shower mixer (chrome plated brass body), incorporating a two-way ceramic disc diverter headwork controlling the flow with a cubed type operating member. Temperature is controlled independently via a thermostatic cartridge with a cubed type member that incorporates a manual override button. The inlets incorporate flow regulators, plastic strainers and approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). The product is supplied with a shower handset, shower hose, overhead shower and a riser rail assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

241003001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” x ¾” offset unions.

Marking:

Nabis (brand of Wolseley) on body

Installation Requirements:

R001 R010 R040

Expiry date:

31/10/2029

Model:

D01193

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company