Directory Search Results

Print List

#2203321

Range of deck mounted, single hole, single outlet (fixed) electronically operated tap assemblies (Chromium plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The products are supplied with a tee piece for installation prior to the solenoid valve. The inlets of the tee piece incorporate a combined NBR gasket and stainless steel filter and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are also supplied with stainless steel braided PEX lined flexible (connecting) hose assemblies and angled spherical valves incorporating a stainless steel strainer for installation on each inlet. Temperature is controlled by adjusting the opening of each angled spherical valve. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2203321
Size:
½” BSP (M) (to isolation valves).
Marking:
Gessi logo on spout backplate
Installation Requirements:
R001 R006 R007 R010 R557
Expiry date:
31/03/2027
Model:
54081 ELECTRONIC BASIN MIXER (flessa decoration), 54181 ELECTRONIC BASIN MIXER (intreccio decoration), 54281 ELECTRONIC BASIN MIXER (meccanica decoration), 54381 ELECTRONIC BASIN MIXER (trame decoration), 54481 ELECTRONIC BASIN MIXER (cesello decoration).
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2207326

Range of spring loaded, resilient trim, in-line check valve cartridges, with EPDM seals and O-rings within a brass valve body and plastic insert body. For insertion in pipes and fittings with specifically sized bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2207326
Size:
DN15
Marking:
59369 & 59742: Caleffi logo, 59742, DN15, EBJ, flow arrow, NF, WRAS, DVGW stamped on body 59639/B: Caleffi logo, 59369B, DN15, EBJ, flow arrow, NF, WRAS, DVGW stamped on body
Installation Requirements:
R001
Expiry date:
31/07/2027
Model:
59639 DN15 59639/B DN15 59742 DN15
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#2208800

Range of in-line non-verifiable single check valve assemblies consisting of a spring loaded resilient trim single check valve cartridge housed within a DZR brass or nickel plated DZR brass body. Compression models are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2208800
Size:
see model
Marking:
Altecnic logo, flow arrorw, CR and size mould on body Model added September 2022 Altecnic logo, size, PN, CR, direction of flow arrow on body of valve
Installation Requirements:
R001
Expiry date:
31/08/2027
Model:
BI-100034 – 15mm compression x 15mm compression BI-100S22 - 22mm compression x 22mm compression ALT-SCV015 - ½” BSP (F) X ½” BSP (F) ALT-SCV020 - ¾” BSP (F) X ¾” BSP (F) ALT-SCV025 - 1” BSP (F) X 1” BSP (F) ALT-SCV032 - 1¼” BSP (F) X 1¼” BSP (F) ALT-SCV040 - 1¼” BSP (F) X 1¼” BSP (F) ALT-SCV050 - 1 ½” BSP (F) X 1 ½” BSP (F) ALT-SCV060 - 2” BSP (F) X 2” BSP (F) Model added September 2022 BI-100S28-28mm compression x 28mm compression

Approval Holder:
Altecnic Limited
Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

Print This Approval


#2206320

Range of in-line non-verifiable single check valve assemblies consisting of a spring loaded resilient trim single check valve cartridge housed within a DZR brass brass body. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2206320
Size:
see model
Marking:
V Therm, flow arrow, size, PN16 and CR etched on body
Installation Requirements:
R001
Expiry date:
30/06/2027
Model:
vTherm STVSN0454 – ¾” BSP (M) vTherm STVSN0455 – 1” BSP (M)
Product Images

Approval Holder:
Vital Energi Utilities Limited
Company Name
Vital Energi Utilities Limited
Address
Century House Roman Road Blackburn
Postcode
BB1 2LD
Country
Lancashire
Phone
01254 296000
General Email
sales@vitalenergi.co.uk

View All Listings by this Company

Print This Approval


#2208801

Range of in-line non-verifiable single check valve assemblies consisting of a spring loaded resilient trim single check valve cartridge housed within a nickel plated DZR brass body. For use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2208801
Size:
see model
Marking:
Altecnic logo, flow arrow, CR and size mould on body
Installation Requirements:
R001
Expiry date:
31/05/2027
Model:
HVSCVC-31 – 15mm compression x 15mm compression HVSCVC-32 - 22mm compression x 22mm compression HVSCV-21 - ½” BSP (F) X ½” BSP (F) HVSCV-22 - ¾” BSP (F) X ¾” BSP (F) HVSCV-23 - 1” BSP (F) X 1” BSP (F) HVSCV-24 - 1¼” BSP (F) X 1¼” BSP (F) HVSCV-25 - 1 ½” BSP (F) X 1 ½” BSP (F) HVSCV-26 - 2" BSP (F) X 2" BSP (F) Model Added September 2022: HVSCVC-33 - 28mm x 28mm

Approval Holder:
Herz Valves UK Ltd
Company Name
Herz Valves UK Ltd
Address
Progress House, Moorfield Point, Moorfield Road
Postcode
GU1 1RU
Country
Slyfield Industrial Estate,
Phone
+44 1483 502211
General Email
sales@herzvalves.com

View All Listings by this Company
Manufacturer:
Altecnic Limited
Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 160 of 557

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.