Range of Instantor Irish Compression Fittings with brass bodies for use with copper pipe to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250504018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODEL

Marking:

‘S’ logo on body. Irish Instantor, size, IS/EN1254-2 on nut.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

310004 Straight Coupler - 1 1/4" 310005 Straight Coupler - 1 1/2" 310006 Straight Coupler - 2" 310042 Reducing Straight Coupler - 1 1/4" X 3/4" 310043 Reducing Straight Coupler - 1 1/4" X 1" 311003 Straight Threaded Coupler - 1" 311004 Straight Threaded Coupler M.I X C - 1 1/4" 311005 Straight Threaded Coupler M.I X C - 1 1/2" 311006 Straight Threaded Coupler M.I X C - 2" 311043 Reducing Straight Threaded Coupler M.I X C - 1 1/4" X 1" 311054 Reducing Straight Threaded Coupler M.I X C - 1 1/2" x" x 1 4 1" 311035 Reducing straight threaded coupler M.I x C 1" x 1 1/2" 311045 Reducing Straight threaded Coupler M.I x C 1 1/4" x 1 1/2" 312004 Straight Threaded coupler F.I x C 1 1/4" 312005 Straight Threaded coupler F.I x C 1 1/2" 312006 Straight Threaded coupler F.I x C 2" 312045 Straight Threaded coupler F.I x C 1 1/4" x 1 1/2" 315004 Elbow CxC 1 1/4" 315005 Elbow CxC 1 1/2" 315006 Elbow CxC 2" 316004 Elbow Threaded M.I 1 1/4" 316005 Elbow Threaded M.I 1 1/2" 316006 Elbow Threaded M.I 2" 317004 Elbow Threaded F.I 1 1/4" 317005 Elbow threaded F.I 1 1/2" 317006 Elbow Threaded F.I 2" 318004 Equal Tee 1 1/4" 318005 Equal Tee 1 1/2" 318006 Equal Tee 2" 318442 Reducing Tee 1 1/4" x 1 1/4" x 3/4" 318443 Reducing Tee 1 1/4" x 1 1/4" x 1" 318553 Reducing Tee 1 1/2" x 1 1/2" x 1" 318554 Reducing Tee 1 1/2" x 1 1/2" X 1 1/4" 310003 Straight Coupler -1" 312003 Straight Threaded coupler F.I x C 1"

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Instantor Works Santry Avenue Dublin

Postcode

D09 K160

Country

Ireland

Phone

+353(0)1 842 6255

General Email

Ryan.Charleson@Instantor.ie

View All Listings by this Company

Range of stainless-steel press fittings with EPDM ‘O’-rings for use with stainless-steel pipe to EN10312. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

GD Press, size, 304L, model number on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Coupling GDC5001 OD15 GDC5002 OD18 GDC5003 OD22 GDC5004 OD28 GDC5005 OD35 GDC5006 OD42 GDC5007 OD54 GDC6501 OD66.7 GDC5008 OD76.1 GDC5009 OD88.9 GDC5010 OD108 Long Coupling GDC5011 OD15 GDC5012 OD18 GDC5013 OD22 GDC5014 OD28 GDC5015 OD35 GDC5016 OD42 GDC5017 OD54 GDC6502 OD66.7 GDC5018 OD76.1 GDC5019 OD88.9 GDC5020 OD108 Reducer with Plain End GDC5021 OD18×OD15 GDC5022 OD22×OD15 GDC5023 OD22×OD18 GDC5024 OD28×OD15 GDC5025 OD28×OD18 GDC5026 OD28×OD22 GDC5048 OD35×OD15 GDC5027 OD35×OD18 GDC5029 OD35×OD22 GDC5030 OD35×OD28 GDC5031 OD42×OD15 GDC5032 OD42×OD18 GDC5033 OD42×OD22 GDC5034 OD42×OD28 GDC5035 OD42×OD35 GDC5036 OD54×OD15 GDC5037 OD54×OD18 GDC5038 OD54×OD22 GDC5039 OD54×OD28 GDC5040 OD54×OD35 GDC5041 OD54×OD42 GDC6503 OD66.7×OD42 GDC6504 OD66.7×OD54 GDC5028 OD76.1×OD42 GDC5042 OD76.1×OD54 GDC6505 OD76.1×OD66.7 GDC5049 OD88.9×OD42 GDC5043 OD88.9×OD54 GDC6506 OD88.9×OD66.7 GDC5044 OD88.9×OD76.1 GDC5045 OD108×OD54 GDC6507 OD108×OD66.7 GDC5046 OD108×OD76.1 GDC5047 OD108×OD88.9 90° Elbow GDC6051 OD15 GDC6052 OD18 GDC6053 OD22 GDC6054 OD28 GDC6055 OD35 GDC6056 OD42 GDC6057 OD54 GDC6511 OD66.7 GDC6058 OD76.1 GDC6059 OD88.9 GDC6060 OD108 90° Elbow with Plain End GDC6071 OD15 GDC6072 OD18 GDC6073 OD22 GDC6074 OD28 GDC6075 OD35 GDC6076 OD42 GDC6077 OD54 GDC6512 OD66.7 GDC6078 OD76.1 GDC6079 OD88.9 GDC6080 OD108 45° Elbow GDC6101 OD15 GDC6102 OD18 GDC6103 OD22 GDC6104 OD28 GDC6105 OD35 GDC6106 OD42 GDC6107 OD54 GDC6513 OD66.7 GDC6108 OD76.1 GDC6109 OD88.9 GDC6110 OD108 45° Elbow with Plain End GDC6121 OD15 GDC6122 OD18 GDC6123 OD22 GDC6124 OD28 GDC6125 OD35 GDC6126 OD42 GDC6127 OD54 GDC6514 OD66.7 GDC6128 OD76.1 GDC6129 OD88.9 GDC6130 OD108 Tee GDC5181 OD15 GDC5182 OD18 GDC5183 OD22 GDC5184 OD28 GDC5185 OD35 GDC5186 OD42 GDC5187 OD54 GDC6515 OD66.7 GDC5188 OD76.1 GDC5189 OD88.9 GDC5190 OD108 Reducing Tee GDC5191 OD18×OD15 GDC5192 OD22×OD15 GDC5193 OD22×OD18 GDC5194 OD28×OD15 GDC5195 OD28×OD18 GDC5196 OD28×OD22 GDC5197 OD35×OD15 GDC5198 OD35×OD18 GDC5199 OD35×OD22 GDC5200 OD35×OD28 GDC5201 OD42×OD15 GDC5202 OD42×OD18 GDC5203 OD42×OD22 GDC5204 OD42×OD28 GDC5205 OD42×OD35 GDC5206 OD54×OD15 GDC5207 OD54×OD18 GDC5208 OD54×OD22 GDC5209 OD54×OD28 GDC5210 OD54×OD35 GDC5211 OD54×OD42 GDC6517 OD66.7×OD22 GDC6518 OD66.7×OD28 GDC6519 OD66.7×OD35 GDC6520 OD66.7×OD42 GDC6521 OD66.7×OD54 GDC5212 OD76.1×OD22 GDC5213 OD76.1×OD28 GDC5214 OD76.1×OD35 GDC5215 OD76.1×OD42 GDC5216 OD76.1×OD54 GDC6522 OD76.1×OD66.7 GDC5217 OD88.9×OD22 GDC5218 OD88.9×OD28 GDC5219 OD88.9×OD35 GDC5220 OD88.9×OD42 GDC5221 OD88.9×OD54 GDC6523 OD88.9×OD66.7 GDC5222 OD88.9×OD76.1 GDC5223 OD108×OD22 GDC5224 OD108×OD28 GDC5225 OD108×OD35 GDC5226 OD108×OD42 GDC5227 OD108×OD54 GDC6524 OD108×OD66.7 GDC5228 OD108×OD76.1 GDC5229 OD108×OD88.9 Tee with Male Thread End GDC5231 OD15×R1/2 GDC5232 OD18×R1/2 GDC5239 OD22×R1/2 GDC5233 OD22×R3/4 GDC5234 OD22×R1 GDC5240 OD28×R1/2 GDC5283 OD28×R3/4 GDC5235 OD28×R1 GDC5281 OD35×Rp3/4 GDC5236 OD35×Rp1 1/4 GDC5237 OD42×Rp1 1/2 GDC5282 OD54×Rp1/2 GDC5238 OD54×Rp2 Tee with Female Thread End GDC5241 OD15×Rp1/2 GDC5242 OD18×Rp1/2 GDC5243 OD18×Rp3/4 GDC5244 OD22×Rp1/2 GDC5245 OD22×Rp3/4 GDC5246 OD28×Rp1/2 GDC5247 OD28×Rp3/4 GDC5248 OD28×Rp1 GDC5249 OD35×Rp1/2 GDC5250 OD35×Rp3/4 GDC5262 OD35×Rp1 GDC5263 OD35×Rp1 1/4 GDC5251 OD42×Rp1/2 GDC5252 OD42×Rp3/4 GDC5264 OD42×Rp1 GDC5265 OD42×Rp1 1/2 GDC5253 OD54×Rp1/2 GDC5254 OD54×Rp3/4 GDC5266 OD54×Rp1 GDC5255 OD54×Rp2 GDC6531 OD66.7×Rp1/2 GDC6532 OD66.7×Rp3/4 GDC6533 OD66.7×Rp1 1/2 GDC5256 OD76.1×Rp3/4 GDC5257 OD76.1×Rp2 GDC5258 OD88.9×Rp3/4 GDC5259 OD88.9×Rp2 GDC5260 OD108×Rp3/4 GDC5261 OD108×Rp2 Adaptor with Male Thread End GDC5360 OD15×R3/8 GDC5361 OD15×R1/2 GDC5362 OD15×R3/4 GDC5363 OD18×R1/2 GDC5364 OD18×R3/4 GDC5365 OD22×R1/2 GDC5366 OD22×R3/4 GDC5367 OD22×R1 GDC5368 OD28×R3/4 GDC5369 OD28×R1 GDC5370 OD28×R1 1/4 GDC5371 OD35×R1 GDC5372 OD35×R1 1/4 GDC5373 OD35×R1 1/2 GDC5374 OD42×R1 1/4 GDC5375 OD42×R1 1/2 GDC5376 OD54×R1 1/2 GDC5377 OD54×R2 GDC6541 OD66.7×R2 1/2 GDC5378 OD76.1×R2 1/2 GDC5379 OD88.9×R3 GDC5380 OD108×R4 Adaptor with Female Thread End GDC5381 OD15×Rp1/2 GDC5382 OD15×Rp3/4 GDC5383 OD18×Rp1/2 GDC5384 OD18×Rp3/4 GDC5385 OD22×Rp1/2 GDC5386 OD22×Rp3/4 GDC5387 OD22×Rp1 GDC5388 OD28×Rp3/4 GDC5389 OD28×Rp1 GDC5390 OD28×Rp1 1/4 GDC5391 OD35×Rp1 GDC5392 OD35×Rp1 1/4 GDC5393 OD35×Rp1 1/2 GDC5394 OD42×Rp1 1/4 GDC5395 OD42×Rp1 1/2 GDC5396 OD54×Rp1 1/2 GDC5397 OD54×Rp2 GDC6542 OD66.7×Rp2 1/2 GDC5398 OD76.1×Rp2 1/2 GDC5399 OD88.9×Rp3 GDC5400 OD108×Rp4 Cap GDC5421 OD15 GDC5422 OD18 GDC5423 OD22 GDC5424 OD28 GDC5425 OD35 GDC5426 OD42 GDC5427 OD54 GDC6542 OD66.7 GDC5428 OD76.1 GDC5429 OD88.9 GDC5430 OD108 Adaptor with Union Nut GDC5341 OD15×G1/2 GDC5353 OD15×G3/4 GDC5342 OD18×G1/2 GDC5343 OD18×G3/4 GDC5345 OD22×G1 GDC5347 OD28×G1 GDC5348 OD28×G1 1/4 GDC5359 OD35×G1 1/4 GDC5350 OD35×G1 1/2 GDC5351 OD42×G1 3/4 GDC5346 OD42×G1 1/2 GDC5356 OD54×G2 GDC5352 OD54×G2 3/8 Adaptor with Union with Female thread GDC5451 OD15×Rp1/2 GDC5452 OD15×Rp3/4 GDC5453 OD18×Rp1/2 GDC5454 OD18×Rp3/4 GDC5455 OD22×Rp3/4 GDC5456 OD22×Rp1 GDC5457 OD28×Rp1 GDC5458 OD35×Rp1 1/4 GDC5459 OD42×Rp1 1/2 GDC5460 OD54×Rp2 Adaptor Union with Male Thread GDC5431 OD15×R1/2 GDC5432 OD15×R3/4 GDC5433 OD18×R1/2 GDC5434 OD18×R3/4 GDC5435 OD22×R1/2 GDC5436 OD22×R3/4 GDC5437 OD22×R1 GDC5438 OD28×R1 GDC5439 OD35×R1 1/4 GDC5440 OD42×R1 1/2 GDC5441 OD54×R2 Adaptor Union GDC5471 OD15 GDC5472 OD18 GDC5473 OD22 GDC5474 OD28 GDC5475 OD35 GDC5476 OD42 GDC5477 OD54 Flange with Pressing Socket GDC5301 OD15 GDC5302 OD18 GDC5303 OD22 GDC5304 OD28 GDC5305 OD35 GDC5306 OD42 GDC5307 OD54 GDC6536 OD66.7 GDC5308 OD76.1 GDC5309 OD88.9 GDC5310 OD108

Approval Holder:

Grande-tek Flow Control Co., Ltd

Company Name

Grande-tek Flow Control Co., Ltd

Address

Industrial Zone of Yunhe District, Fuyang Road, Cangzhou, Hebei

Postcode

061000

Country

China

View All Listings by this Company

‘Uponor Q&E’ range of brass press-fit fittings for use with PE-Xa-PE-PE ‘Uponor Aqua Pipe AU’ multi-layered pipes. Maximum operating pressure 10 bar. Maximum operating temperature 70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604025

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm – 25mm, ½” – 1”.

Marking:

Pipe - Uponor, size, PN, temperature, SDR & PE-Xa. Fittings - Uponor logo, size and other technical information.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Uponor Aqua Pipe AU 3-layer pipes: 1126786 - Uponor Aqua Pipe AU 16x2,2 100 mt, 1126787 - Uponor Aqua Pipe AU 20x2,8 100 mt, 1126788 - Uponor Aqua Pipe AU 25x3,5 50mt. Brass fittings: Uponor Q&E Coupling LL: 1126789 - 16x16, 1126790 - 20x20, 1126791 - 25x25. Uponor Q&E Reducer LL: 1126792 - 20x16, 1126793 - 25x16, 1126794 - 25x20. Uponor Q&E Elbow LL: 1126795 - 16x16, 1126796 - 20x20, 1126797 - 25x25. Uponor Q&E Tee LL: 1126798 - 16x16x16, 1126799 - 20x20x20, 1126800 - 25x25x25. Uponor Q&E Tee Reducer LL: 1126801 - 16x20x16, 1126802 - 20x16x16, 1126803 - 20x16x20, 1126804 - 20x20x16, 1126805 - 25x16x25, 1126806 - 25x20x25. Uponor Q&E Plug LL: 1126807 - 16, 1126808 - 20. Uponor Q&E Adapter Female LL: 1126809 - 16-Rp1/2", 1126810 - 20-Rp1/2", 1126811 - 20-Rp3/4", 1126812 - 20-Rp1", 1126813 - 25-Rp1". Uponor Q&E Adapter Male LL: 1126814 - 16-R1/2", 1126815 - 16-R3/4", 1126816 - 20-R1/2", 1126817 - 20-R3/4", 1126818 - 20-R1", 1126819 - 25-R3/4", 1126820 - 25-R1". Uponor Q&E Adapter Swivel Nut: 1126821 - 16-1/2", 1126822 - 20-1/2", 1126823 - 20-3/4", 1126824 - 25-3/4", 1126825 - 25-1". Uponor Q&E Elbow Swivel Nut: 1126826 - 16-1/2", 1126827 - 20-1/2". Uponor Q&E Tap Elbow LL: 1126828 - 16-1/2", 1126829 - 20-1/2", 1126830 - 20-3/4". Uponor Q&E Elbow Adapter Male LL: 1126831 - 16-G1/2", 1126832 - 20-G1/2", 1126833 - 20-R1/2", 1126834 - 20-G3/4", 1126871 - 25-G3/4". Uponor Q&E Elbow Adapter Female LL: 1126835 - 16-1/2", 1126836 - 20-3/4", 1126837 - 25-3/4". Uponor Q&E Tee female LL: 1126838 - 25-1/2"-25, 1126839 - 25-3/4"-25. Uponor Q&E BP-Elbow LL: 1126841 - 16-1/2" MT L = 65 MM, 1126842 - 16-1/2" MT L = 90 MM, 1126843 - 16-1/2" MT L = 175 MM, 1126844 - 16-1/2" MT L = 200 MM, 1126845 - 20-1/2"MT L = 95 MM, 1126846 - 20-1/2"MT L = 200 MM, 1126847 - 20-3/4" MT L = 100 MM. Uponor Q&E Brass Adapter LL: 1126848 - 16-15 CU, 1126849 - 20-15 CU, 1126850 - 20-3/4" CU, 1126851 - 25-1" CU. Uponor Q&E Brass Adapter LL PRESS: 1126852 - 16-1/2" CU, 1126853 - 20-3/4" CU, 1126854 - 25-1" CU. Uponor Q&E adapter male thread PL: 1023003 - 16-R1/2"MT, 1023005 - 20-R1/2"MT, 1023007 - 25-R3/4"MT. Uponor Smart Aqua tap elbow term. box Q&E UP PL: 1047935 - 16-Rp1/2"FT. Uponor Smart Aqua tap elbow term. box Q&E SP PL: 1047932 - 20-Rp1/2"FT, 1047933 - 25-Rp3/4"FT.

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

U Profile range of press fittings incorporating EPDM ‘O’-rings. For use with MONFLEX PEXB/AL/PEXB MULTILAYER PIPES. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2304380

Size:

16-32mm. BSP threaded connections: ½” - 1½” (M) or (F).

Marking:

Fitting: Ebrille & size Pipe: Ebrille and product info on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

EBRILLE 'U' FITTINGS Straight: REM16X16 REM18X18 REM20X20 REM25X25 REM32X32 Reduced straight: REMR20X16 REMR20X18 REMR25X16 REMR25X18 REMR25X20 REMR26X16 REMR26X18 REMR26X20 REMR32X16 REMR32X18 REMR32X20 REMR32X25 REMR32X26 Male straight: REDFM16X1/2 REDFM16X3/4 REDFM18X1/2 REDFM20X1/2 REDFM20X1 REDFM25X1/2 REDFM25X3/4 REDFM25X1 REDFM26X1/2 REDFM26X3/4 REDFM26X1 REDFM32X1/2 REDFM32X3/4 REDFM32X1 REDFM32X11/4 REDFM32X11/2 Female straight: REDFF16X1/2 REDFF16X3/4 REDFF16X1 REDFF18X1/2 REDFF18X3/4 REDFF20X1/2 REDFF20X3/4 REDFF20X1 REDFF25X1/2 REDFF25X3/4 REDFF25X1 REDFF26X1/2 REDFF26X3/4 REDFF26X1 REDFF32X1/2 REDFF32X3/4 REDFF32X1 REDFF32X11/4 REDFF32X11/2 Elbow: RE90°16X16 RE90°18X18 RE90°20X20 RE90°25X25 RE90°26X26 RE90°32X32 Male elbow: RE90°FM16X1/2 RE90°FM16X3/4 RE90°FM18X1/2 RE90°FM18X3/4 RE90°FM20X1/2 RE90°FM20X3/4 RE90°FM20X1 RE90°FM25X1/2 RE90°FM25X3/4 RE90°FM25X1 RE90°FM26X1/2 RE90°FM26X3/4 RE90°FM26X1 RE90°FM32X1/2 RE90°FM32X3/4 RE90°FM32X1 RE90°FM32X11/4 Female elbow: RE90°FF16X1/2 RE90°FF16X3/4 RE90°FF18X1/2 RE90°FF18X3/4 RE90°FF20X1/2 RE90°FF20X3/4 RE90°FF20X1 RE90°FF25X1/2 RE90°FF25X3/4 RE90°FF25X1 RE90°FF26X1/2 RE90°FF26X3/4 RE90°FF26X1 RE90°FF32X1/2 RE90°FF32X3/4 RE90°FF32X1 RE90°FF32X1 1/4 Wall plated elbow: RE90°M16X1/2 RE90°M16X3/4 RE90°M18X1/2 RE90°M20X1/2 RE90°M20X3/4 Tee: RET16X16X16 RET18X18X18 RET20X20X20 RET25X25X25 RET26X26X26 RET32X32X32 Reduced tee: RETR16X20X16 RETR16X25X16 RETR16X26X16 RETR18X16X18 RETR18X20X18 RETR18X25X18 RETR18X26X18 RETR20X16X20 RETR20X18X20 RETR20X25X20 RETR25X16X25 RETR25X16X16 RETR26X16X16 RETR25X18X25 RETR25X20X25 RETR25X32X25 RETR20X26X20 RETR26X16X26 RETR26X18X26 RETR26X20X26 RETR26X32X26 RETR32X16X32 RETR32X18X32 RETR32X20X32 RETR32X25X32 RETR25X16X20 RETR32X20X25 RETR26X16X20 RETR32X20X26 RETR20X16X16 RETR20X20X16 RETR25X25X18 RETR25X25X20 RETR25X18X18 RETR25X20X20 RETR25X16X20 RETR32X20X25 RETR26X26X16 RETR26X26X18 RETR26X26X20 RETR26X18X18 RETR26X20X20 RETR26X20X16 RETR32X20X26 RETR32X32X16 RETR32X32X20 RETR32X32X26 RETR32X25X25 RETR32X26X26 RETR32X26X32 Male tee: RETFM16X1/2X16 RETFM16X3/4X16 RETFM20X1/2X20 RETFM20X3/4X20 Female tee: RETFF16X1/2X16 RETFF16X3/4X16 RETFF18X1/2X18 RETFF18X3/4X18 RETFF20X1/2X20 RETFF20X3/4X20 RETFF20X1X20 RETFF25X1/2X25 RETFF25X3/4X25 RETFF25X1X25 RETFF26X1X26 RETFF26X3/4X26 RETFF26X1X26 RETTFF32X1/2X32 RETFF32X3/4X32 RETFF32X1X32 RETFF32X11/4X32 Cap: REC16 REC18 REC20 REC25 REC26 REC32 Female union: REDFFL16X1/2 REDFFL16X3/4 REDFFL20X1/2 REDFFL20X3/4 REDFFL25X1/2 REDFFL25X3/4 REDFFL25X1 REDFFL26X1/2 REDFFL26X3/4 REDFFL26X1 REDFFL32X1 TO BE USED WITH MONOFLEX PEXB/ALPEXB MULTILAYER PIPES: MZ16X2MONFLEXMT100 MZ16X2MONFLEXMT200 MZ16X2MONFLEXMT400 MZ18X2MONFLEXMT100 MZ20X2MONFLEXMT100 MZ20X2MONFLEXMT200 MZ20X2MONFLEXMT400 MZ25X2,5MONFLEXMT100 MZ26X3MONFLEXMT100 MZ32X3MONFLEXMT100

Approval Holder:

Ebrille s.r.l.

Company Name

Ebrille s.r.l.

Address

Administration and Esablishment, Straded Canelli, 53A - 14049 Nizza Monferrato AT

Country

Italy

View All Listings by this Company

Range of copper and bronze capillary brazed fittings for use with copper pipe manufactured to EN1057:2006 +A1:2010 Maximum pressure 10.0 Bar (54mm up to and including 108mm) Maximum pressure 2.0 Bar (Over 108mm up to and including 159mm) Maximum operating temperature 100°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251104002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Flowflex logo and size on the body.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

5002A LONG EQUAL 90DEG BEND EF (Size = mm Brazed): 5002A.67, 5002A.76, 5002A.89, 5002A.108. 5041 45DEG ELBOW EF (Size = mm Brazed): 5041.67, 5041.76, 5041.108, 5041.133, 5041.159. 5090 EQUAL ELBOW EF (Size = mm Brazed): 5090.67, 5090.76, 5090.89, 5090.108, 5090.133, 5090.159. 5092 STREET ELBOW EF (Size= mm Brazed): 5092.67, 5092.76. 5130 TEE EQUAL EF (Size = mm Brazed): 5130.67, 5130.76, 5130.108, 5130.133, 5130.159. 5130R TEE REDUCED BRANCH EF (Size = mm x mm x mm Brazed): 5130R.672867, 5130R.673567, 5130R.674267, 5130R.675467, 5130R.762876, 5130R.763576, 5130R.764276, 5130R.765476, 5130R.766776, 5130R.10835108, 5130R.10842108, 5130R.10854108, 5130R.10867108, 5130R.10876108, 5130R.133108133, 5130R.15954159, 5130R.15967159, 5130R.15976159, 5130R.159108159, 5130R.159133159. 5240 REDUCING CPLG (Size = mm x mm Brazed): 5240.67x42, 5240.67x54, 5240.76x54, 5240.76x67, 5240.89x76, 5243 FITTING RED EF (Size = mm x mm Brazed): 5243.67x22, 5243.67x28, 5243.67x35, 5243.67x42, 5243.67x54, 5243.76x35, 5243.76x42, 5243.76x54, 5243.76x67, 5243.89x76, 5243.108x42, 5243.108x54, 5243.108x67, 5243.108x76, 5243.108x89, 5243.133x67, 5243.133x76, 5243.133x108, 5243.159x76, 5243.159x108, 5243.159x133. 5270 COUPLING EF (Size = mm x mm Brazed): 5270.67, 5270.76, 5270.89, 5270.108, 5270.133, 5270.159. 5301 STOP END EF (Size = mm Brazed): 5301.67, 5301.76, 5301.89, 5301.108, 5301.159. 4270G CUFI STRAIGHT BRONZE ADAPTOR (Size = mm Brazed x BSP M): 4270G.67x2½”, 4270G.76x3", 4270G.108x4". 4243G CUIT ADAPTOR BRONZE (Size = mm Brazed by BSP F): 4243G.67x2½”, 4243G.76x2½”, 4243G.76x3", 4243G.108x4".

Approval Holder:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company