Range of inline water meter kits incorporating brass bodies, a spherical valve and drain off valve. For use with copper pipe (manufactured to BS EN 1057:1996). Maximum working pressure 10.0 bar. Cold water use only.

Section:

4001 Components and accessories

Section Subtitle:

Water meters.

WRAS Approval Number:

241104712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm & 22mm crimped connections. 15mm & 22 compression.

Marking:

BZUK on body

Installation Requirements:

R001 R110 R511

Expiry date:

30/11/2029

Model:

BZMKC15(VE) 15mm Inline Meter Kit Compression. BZMKC22(VE) 20mm Inline Meter Kit Compression. BZMKP15(VE) 15mm Inline Meter Kit Crimp. BZMKP22(VE) 20mm Inline Meter Kit Crimp.

Product Images

Approval Holder:

Bayzone Holdings Pty Ltd

Company Name

Bayzone Holdings Pty Ltd

Address

View All Listings by this Company

Range of inline water meter kits incorporating brass bodies, a spherical valve and drain off valve. For use with copper pipe (manufactured to BS EN 1057:1996). Maximum working pressure 10.0 bar. Cold water use only.

Section:

4001 Components and accessories

Section Subtitle:

Water meters.

WRAS Approval Number:

241104717

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm & 22mm crimped connections. 15mm & 22 compression.

Marking:

EBCO on body

Installation Requirements:

R001 R110 R511

Expiry date:

30/11/2029

Model:

1982-015015-10-011 15mm Inline Meter Kit Compression. 1982-022022-10-011 20mm Inline Meter Kit Compression. 1982-015015-10-066 15mm Inline Meter Kit Crimp. 1982-022022-10-066 20mm Inline Meter Kit Crimp.

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

'Tuffkote Bituminous Aluminium'. Factory applied, grey coloured, two-component crude oil bitumen coating. Mix in a 17.1:2.9 volume ratio and apply as per manufacturer's data sheet 'SPL/PMG/2019100166', 'Rev 2', dated '04/2024'. Cure for 7 days@30°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

250355077

Expiry date:

31/03/2030

Approval Holder:

Shalimar Paints Ltd.

Company Name

Shalimar Paints Ltd.

Address

A1 & A2, UPSIDC Industrial Area, Sikandrabad, Distt. Bulandshahr, Sikandrabad, Uttar Pradesh, 203205

Country

India

View All Listings by this Company

'TC-7808-19'. Factory applied, grey coloured PTFE coating. Apply as per manufacturer's data sheet dated June 8, 2019. Cure for 20 minutes@380°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

241155022

Expiry date:

30/11/2029

Approval Holder:

Zhejiang Wigo Intelligence Pump Co., Ltd.

Company Name

Zhejiang Wigo Intelligence Pump Co., Ltd.

Address

No. 2 Shengda Road, Zeguo Town, Wenling Town, Zhejiang

Country

China

View All Listings by this Company

'EP015-UTB'. Factory applied, blue coloured epoxy powder coating. Apply as per manufacturer's instructions reference 'PR-CA-00-024' dated 15-02-19. Cure for 15 minutes@200°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250255015

Expiry date:

28/02/2030

Approval Holder:

Utebagua S.L.U.

Company Name

Utebagua S.L.U.

Address

Poligono Industrial La Casaza, C/Estonia, Nave 10, 50180 Utebo (Zaragoza)

Country

Spain

View All Listings by this Company