Range of stainless-steel pressure sensors. Maximum working pressures: B83.a-b-C5-3-f-g-h-i-j-k-l-m-n-o (Thread G1): 10.0 bar. B83.a-b-cd-e-f-g-h-i-j-k-l-m-n-o with METEC - metallic measuring cell: 25.0 bar, B83.a-b-cd-e-f-g-h-i-j-k-l-m-n-o with Piezoresistive - metallic measuring cell: 40.0 bar. Maximum operating temperature 100°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

B83.a-b-C5-3-f-g-h-i-j-k-l-m-n-o: 1” BSP (M). B83.a-b-LF-e-f-g-h-i-j-k-l-m-n-o: ½” NPT (M) & ¼” NPT (F). B83.a-b-D8/N8/D4/CQ/VE/CH-e-f-g-h-i-j-k-l-m-n-o: DN25, DN50 and DN80 flanged.

Marking:

VEGA on body. VEGA model, serial number, date of manufacture (YYYY) and other technical information on adhesive label or data plate on body.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

VEGABAR 83 range: B83.a-b-cd-e-f-g-h-i-j-k-l-m-n-o a = Scope: • Not relevant for WRAS approval b = Approval: • Not relevant for WRAS approval cd = Process fitting / Material (NOTE - PN40 indicated below is possible maximum, the actual maximum working pressure is dictated by measuring cell, see entry ‘e’): • Material: 316L, Alloy C276 • Threads o C5: Thread G1, ISO228-1 / 316L (only Piezoresistive - metallic measuring cell) o LF: Thread ½NPT, innen ¼NPT, ASME B1.20.1 / 316L - D8: Flange DN25 PN40 Form C, EN1092-1/ 316/316L (only Piezoresistive - metallic measuring cell) - N8: Flange DN25 PN40 Form B1, EN1092-1 / 316/316L - D4: Flange DN50 PN40 Form C, EN1092-1/ 316/316L - CQ: Flange DN50 PN40 Form B1, EN1092-1 / 316/316L - VE: Flange DN80 PN40 Form C, EN1092-1 / 316/316L - CH: Flange DN80 PN40 Form B1, EN1092-1 / 316/316L e = Process temperature • Is up to the Process fitting and Material Thread C5 -> 3 (EPDM) High Temperature (METEC measuring cell): F, H, or T Low temperature (Piezoresistive - metallic measuring cell): S or E f = Pressure • Relative pressure (measurement against atmosphere) • Absolute pressure (measurement against vacuum) • Relative pressure climate-compensated (measurement against atmosphere) g = Measuring range • Not relevant for WRAS approval (maximum is 40 bar) h = Accuracy class • Different accuracy classes from 0.075 % to 0.20 % i = Electronics • Not relevant for WRAS approval j = Supplementary electronics • Not relevant for WRAS approval k = Housing • Not relevant for WRAS approval l = Housing version / Protection • Not relevant for WRAS approval m = Cable entry / Connection • Not relevant for WRAS approval n = Display/adjustment module PLICSCOM • Not relevant for WRAS approval o = Certificates • M – Yes o Foodstuff/Pharmaceutical certificate: WRAS

Approval Holder:

VEGA Grieshaber KG

Company Name

VEGA Grieshaber KG

Address

Am Hohenstein 113 Schiltach

Postcode

77761

Country

Germany

General Email

info.de@vega.com

View All Listings by this Company

Manufacturer:

VEGA Grieshaber KG

Company Name

VEGA Grieshaber KG

Address

Am Hohenstein 113 Schiltach

Postcode

77761

Country

Germany

General Email

info.de@vega.com

View All Listings by this Company

Range of flow sensors with brass bodies (various grades - see model). Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M). Internal turbine: 19.54mm O.D

Marking:

With body: SIKA Systemtechnik GmbH logo (SIKA) and address, PN, Part No., CE and batch code (WW YY) on adhesive label on cable. Flow arrow on body. Internal turbine without body: Serial No., SIKA Systemtechnik GmbH logo (SIKA) and batch code (WW YY) on body.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

Flow sensors type series VTY15: VY1545abcdefgh & VY1545MAHNefA4 Where: ab = body material (MA = Brass CW617N-DW, MC = Brass CW510L, MK = Brass CW724R, K5 = without body, only the internal turbine system) cd = sensor and signal output (HN = Hall sensor-NPN, 00 = without sensor) ef = electrical cable connection (various - in combination can be 00…99 or AA…ZZ, examples 05 = 500mm, 12=1200mm, X1=80mm with Molex plug connector) gh = process connection (A4 = G3/4 male thread, YY = without, only possible with ab = K5) VY1545abyyyyyzz Where: ab = body material (MA = Brass CW617N-DW, MC = Brass CW510L, MK = Brass CW724R, K5 = without body, only the internal turbine system) yyyyy = name of customer (5 digits, e.g. SCHMI, MUELL, …) zz = consecutive number (2 digits, 01…99) & Internal turbine only: VY1545K50000YY

Approval Holder:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Manufacturer:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Range of isolation valves incorporating brass bodies and EPDM ‘O’-rings. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

251202029

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

855755 Eccentric coupling STOP CHECK: ½” BSP (M) x ¾” BSP (M) Offset Union. 855755UK In-line STOP CHECK: ½” BSP (M) x ¾” BSP (M).

Marking:

855755 model: Delabie on valve body and cowl. 855755UK model: Delabie on cowl.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

855755 Eccentric coupling STOP CHECK, 855755UK In-line STOP CHECK.

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Range of electric water pumps, with stainless steel bodies, shaft and either stainless steel or plastic impellors. Maximum working pressure 8.5 Bar. Maximum operating temperature: See models.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251202716

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F)

Marking:

Ultra models = Pentax logo, model and technical data on data plate on body Plus models = Foras logo, model and technical data on data plate on body

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

U 3A-90/4; U 3A-100/5 - 35 °C U 5A-120/4; U 5A-150/5 - 35 °C U 3A-90/4 T; U 3A-100/5 T - 35 °C U 5A-120/4 T; U 5A-150/5 T - 35 °C P 3A-90/4; P 3A-100/5 - 35 °C P 5A-120/4; P 5A-150/5 - 35 °C P 3A-90/4 T; P 3A-100/5 T - 35 °C P 5A-120/4 T; P 5A-150/5 T - 35 °C U 3SA-90/4; U 3SA-100/5 - 80 °C U 5SA-120/4; U 5SA-150/5 - 80 °C U 3SA-90/4 T; U 3SA-100/5 T - 80 °C U 5SA-120/4 T; U 5SA-150/5 T - 80 °C P 3SA-90/4; P 3SA-100/5 - 80 °C P 5SA-120/4; P 5SA-150/5 - 80 °C P 3SA-90/4 T; P 3SA-100/5 T - 80 °C P 5SA-120/4 T; P 5SA-150/5 T - 80 °C

Approval Holder:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Range of self-priming electric booster pumps with plastic bodies incorporating plastic impellers with variable speed settings, and a non-return return valve (not suitable for backflow protection). Maximum working pressure 4.5 Bar Maximum operating temperature 50.0°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251202719

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Available in both ¾” BSP (M) or ¾” NPT (M)

Marking:

DAB company logo on pump body

Installation Requirements:

R001 R008 R415

Expiry date:

31/12/2030

Model:

60220687 EsyBox Pop (Pressurisation booster system) 60217710 ESYDOCK POP (Base for an easy assembling of the pump Esybox Pop on the wall, provided with BSP and NPT threaded connections.)

Approval Holder:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company