Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2305352

Range of manually operated balancing valves with either a DZR brass or bronze body incorporating a non-rising spindle balancing mechanism. Valves are adjusted using a handwheel. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 2305352
Size:: ½” - 2” BSP (F).
Marking:: "R" Logo of Reliance on cap. DZR models are also marked CR. PN rating, size and flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/05/2028
Model:: DBRV100001: 1/2" FBSP DZR BRASS BALANCING VALVE Max Flowrate 0.023l/s (DN15 X) DBRV100002: 1/2" FBSP DZR BRASS BALANCING VALVE Max Flowrate 0.045l/s (DN15 U) DBRV100003: 1/2" FBSP DZR BRASS BALANCING VALVE Max Flowrate 0.074l/s (DN15 L) DBRV100004: 1/2" FBSP DZR BRASS BALANCING VALVE Max Flowrate 0.148l/s) (DN15) DBRV100005: 3/4" FBSP DZR BRASS BALANCING VALVE Max Flowrate 0.325l/s (DN20) DBRV100006: 1" FBSP DZR BRASS BALANCING VALVE Max Flowrate 0.603l/s (DN25) DBRV100007: 1-1/4" FBSP DZR BRASS BALANCING VALVE Max Flowrate 1.250l/s (DN32) DBRV100008: 1-1/2" FBSP DZR BRASS BALANCING VALVE Max Flowrate 1.880l/s (DN40) DBRV100009: 2" FBSP DZR BRASS BALANCING VALVE Max Flowrate 3.510l/s (DN50) DBRV100010: 1/2" FBSP BRONZE BALANCING VALVE Max Flowrate 0.045l/s (DN15 U) DBRV100011: 1/2" FBSP BRONZE BALANCING VALVE Max Flowrate 0.074l/s (DN15 L) DBRV100012: 1/2" FBSP BRONZE BALANCING VALVE Max Flowrate 1.48l/s (DN15) DBRV100013: 3/4" FBSP BRONZE BALANCING VALVE Max Flowrate 0.325l/s (DN20) DBRV100014: 1" FBSP BRONZE BALANCING VALVE Max Flowrate 0.603l/s (DN25) DBRV100015: 1-1/4" FBSP BRONZE BALANCING VALVE Max Flowrate 1.25l/s (DN32) DBRV100016: 1-1/2" FBSP BRONZE BALANCING VALVE Max Flowrate 1.880l/s (DN40) DBRV100016: 1-1/2" FBSP BRONZE BALANCING VALVE Max Flowrate 1.880l/s (DN40)

Approval Holder:: RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

WRAS Approval Number: #2312506

'PA-727 CM1404 White & PA-727 CM1405 Grey'. White or grey coloured, injection moulded ABS materials. PA-727 CM1404 White is for use with water up to 85°C. PA-727 CM1405 Grey is for use with water up to 23°C.

Section:: 5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)
Expiry date:: 31/12/2028

Approval Holder:: Plastribution Ltd.

Company Name
Plastribution Ltd.
Address
14 Charter Point Way, Ashby de la Zouch, Leicestershire
Postcode
LE65 1NF
Phone
+44 (0) 1530 560560
General Email
sales@plastribution.co.uk

View All Listings by this Company

WRAS Approval Number: #2011555

'JSGL-OPC (N)'. Factory applied, grey coloured Ordinary Portland Cement. Mix and apply as per manufacturer's work instructions 'JSGL/WI/14', issue '02', revision '00', dated '29.09.2018'. Cure for 4 hours@45°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2011555
Expiry date:: 30/11/2025

Approval Holder:: Jindal Saw Gulf LLC.

Company Name
Jindal Saw Gulf LLC.
Address
PO Box 92135, Plot No. 11 NR28, ICAD-III, Mussafah, Abu Dhabi
Country
United Arab Emirates

View All Listings by this Company

WRAS Approval Number: #2310550

'Welmortar-BFS'. Factory applied, grey coloured cement mortar. Mix sand:cement:water in a 3:2:1 weight ratio and apply as per manufacturer's SOP document 'WDIPL/QA/WI/14B', revision '01', dated '08.02.2023'. Cure for 28 days@30°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2310550
Expiry date:: 31/10/2028

Approval Holder:: Welspun DI Pipes Limited

Company Name
Welspun DI Pipes Limited
Address
Survey No. 615-619, 632-634 & 650, Welspun City, Versamedi Village, Taluka Anjar, Kutch Anjar, Kachchh, Gujarat, 370110
Country
India

View All Listings by this Company

WRAS Approval Number: #2310551

'Welmortar-SRP'. Factory applied, grey coloured cement mortar. Mix sand:cement:water in a 3:2:1 weight ratio and apply as per manufacturer's SOP document 'WDIPL/QA/WI/14C', revision '1', dated '08.02.2023'. Cure for 28 days@30°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2310551
Expiry date:: 31/10/2028

Approval Holder:: Welspun DI Pipes Limited

Company Name
Welspun DI Pipes Limited
Address
Survey No. 615-619, 632-634 & 650, Welspun City, Versamedi Village, Taluka Anjar, Kutch Anjar, Kachchh, Gujarat, 370110
Country
India

View All Listings by this Company