Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #251104008

Range of thermostatic cartridges incorporating plastic bodies and stainless-steel filters. For insertion into specifically dimensioned bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:: 0442 Thermostatic cartridges
Section Subtitle:: Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:: 251104008
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Manufacturer diameter 31mm to 32mm.
Marking:: Vernet France on body.
Installation Requirements:: R001
Expiry date:: 30/11/2030
Model:: CA43-060, CA43-095, CA43-089, CA43-054, CA43-078, CA43-045, CA43-063, CA43-071, CA43-072, CA43-090, CA43-091, CA43-102, CA43-098, CA43-109, CA43-105, CA43-075, CA43-059, CA43-058, CA43-068, CA43-066, CA43-069, CA43-076, CA43-057, CA43-065, CA43-067, CA43-101, CA43-077, CA43-073, CA43-061, CA43-064, CA43-086, CA43-087, CA43-062.

Approval Holder:: VERNET GROUP

Company Name
VERNET GROUP
Address
21-27 route d’Arpajon Ollainville – BP31 ARPAJON
Postcode
91291
Country
France
General Email
roze@vernet.fr

View All Listings by this Company

WRAS Approval Number: #251102703

Single hole, single outlet (swivel) pull down spray combination tap assembly (chromium plated brass body) with a ceramic cartridge headwork and single lever operating member. The product incorporates a pull-down spray with a plastic aerator, which also incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:: 0445 Combination Tap Assemblies
Section Subtitle:: Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:: 251102703
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless Steel and polyamide braided PEX lined flexible hose assemblies incorporating 1/2" BSP captive nut end connections.
Marking:: Grohe logo on body
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 30/11/2030
Model:: 30.648.xxx Where xx1 denotes finish, can be replaced by: 001 – Chrome

Approval Holder:: Grohe AG

Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

WRAS Approval Number: #251103302

Section:: 0450 Combination Tap Assemblies
Description:: A Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted stainless-steel braided EPDM lined inlet hoses Capable of Achieving AUK3 Tap Gap Click type waste (not verified by test)
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Wastes	Includes
KM FRZ BAS3.5 C	Chrome	15mm compression	5 bar	65 °C	Bristan	Operating member	No	Ceramic cartridge	C-plate	Aerator	Click Type	Flow Regulator Fitted,

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #251116301

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Capable of achieving AUK3 Tap Gap Stainless steel braided, PEX lined inlet hoses
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
681104	chrome	½” BSP (F)	5 bar	60 °C	KINEN	On handle	No	Ceramic Cartridge	C-plate	Aerator
681101	chrome	½” BSP (F)	5 bar	60 °C	KINEN	On handle	No	Ceramic Cartridge	C-plate	Aerator
691104	chrome	½” BSP (F)	5 bar	60 °C	KINEN	On handle	No	Ceramic Cartridge	C-plate	Aerator
691101	chrome	½” BSP (F)	5 bar	60 °C	KINEN	On handle	No	Ceramic Cartridge	C-plate	Aerator
891105-1	chrome	½” BSP (F)	5 bar	60 °C	KINEN	On handle	No	Ceramic Cartridge	C-plate	Aerator

Product Images

Approval Holder:: Guangdong Kinen Sanitary Ware Industrial Co., Ltd.

Company Name
Guangdong Kinen Sanitary Ware Industrial Co., Ltd.
Address
No.57, Sijiu Road, Zhishan Town, Heshan City, Guangdong
Country
China

View All Listings by this Company
Manufacturers:: Guangdong Kinen Sanitary Ware Industrial Co., Ltd.

WRAS Approval Number: #251102015

Range of single hole, single outlet fixed combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:: 251102015
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The products are supplied with a lever type pop up waste set – not verified by test.
Size:: Stainless steel braided, PEX lined flexible hose assemblies incorporating 1/2” BSP (F) captive nut end connections (models 24.262.xx1 & 24.324.xx1 only). Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections (all models excluding 24.262.xx1 & 24.324.xx1)
Marking:: Grohe on operating member
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 30/11/2030
Model:: 23.262.xx1 24.316.xx1 32.734.xx1 24.317.xx1 24.256.xx1 24.318.xx1 24.262.xx1 24.324.xx1 24.265.xx1 24.325.xx1 24.266.xx1 24.267.xx1 24.326.xx1 24.273.xx1 24.331.xx1 where xx1 denotes finish, and can be replaced by: 001 – Chrome DC1 – Supersteel DA1 – Warm sunset AL1 – Brushed hard graphite GL1 – cool sunrise

Approval Holder:: Grohe AG

Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company