Directory Search Results

Print List

#2112066

Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, for above ground use only.
WRAS Approval Number:
2112066
Size:
See Model
Marking:
B&Q (brand of Kingfisher), size and PN10 on body
Installation Requirements:
R001 R511
Expiry date:
31/12/2026
Model:
EPH_VAL20_0049a Drain-Off Cock - (15mm Capillary), EPH_VAL20_0052a Drain-Off Cock - (1/2” BSP (M)),

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#2112067

Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, for above ground use only.
WRAS Approval Number:
2112067
Size:
See Model
Marking:
SF (Brand of Kingfisher), size and PN10 on body
Installation Requirements:
R001 R511
Expiry date:
31/12/2026
Model:
EPH_VAL20_0049b Drain-Off Cock - Type A (15mm Capillary), EPH_VAL20_0051 Drain-Off Cock - Type A, (22mm Capillary), EPH_VAL20_0052b Drain-Off Cock - Type A, (1/2” BSP (M)), EPH_VAL20_0054b Drain-Off Cock - Type A (15mm Spigot).

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#2110120

Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2110120
Size:
See model
Marking:
Valtech, WRAS, and date of manufacture (YYYY) on ferrule. Flow arrow on isolation valve
Installation Requirements:
R001
Expiry date:
31/10/2026
Model:
FH-SS-01 DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. FH-SS-01 DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. FH-SS-02 DN8 bore: 15mm compression, ⅜” & ½” captive nut. FH-SS-02 DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. FH-SS-02 DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. FH-SS-02 DN17 & DN19 bore: 22mm compression, ¾” captive nut. FH-SS-03 DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). FH-SS-03 DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). FH-SS-03 DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). FH-SS-03 DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). FH-SS-04 DN10 bore: 15mm compression with isolation valve, 15mm pushfit. FH-SS-04 DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. FH-SS-04 DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. FH-SS-07 DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. FH-SS-07 DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. FH-SS-08 DN8 bore: 15mm compression, ⅜” & ½” BSP (M). FH-SS-08 DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). FH-SS-08 DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). FH-SS-08 DN17 & DN19 bore: 22mm compression, ¾” BSP (M). FH-SS-09 DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. FH-SS-09 DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. FH-SS-09 DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. FH-SS-10 DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. FH-SS-10 DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. FH-SS-11 DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit FH-SS-11 DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. FH-SS-11 DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. FH-SS-12 DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). FH-SS-12 DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). FH-SS-12 DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).

Approval Holder:
Ningbo Valtech Flow Control Co. Ltd.
Company Name
Ningbo Valtech Flow Control Co. Ltd.
Address
Room 610 New Oriental Times Building No.1130
Country
Baizhang East Road
Phone
0574-88001556

View All Listings by this Company

Print This Approval


#2207055

Range of T type thermostatic blending valves with DZR brass bodies and EPDM O-rings. The inlets incorporate stainless steel strainers and single check valve cartridges verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2207055
Size:
¾” BSP – 2” BSP male. ¾” BSP – 2” BSP female.
Marking:
Böme, CR, T40 series, pressure and size on body.
Installation Requirements:
R001 R040
Expiry date:
31/07/2027
Model:
T401142G, T401122G, T402002G, T402142G, T402342G, T400340G, T401000G, T401140G, T401120G, T402000G, T400341G, T401001G, T401141G, T401121G, T402001G, T400350G, T401010G, T401150G, T401130G, T402010G, T400351G, T401011G, T401151G, T401131G, T402011G
Product Images

Approval Holder:
Böme s.r.l.
Company Name
Böme s.r.l.
Address
Via dello Strego 1, 28010, Cavallirio (NO)
Country
Italy
Phone
0163-80106

View All Listings by this Company
Manufacturer:
Böme s.r.l.
Company Name
Böme s.r.l.
Address
Via dello Strego 1, 28010, Cavallirio (NO)
Country
Italy
Phone
0163-80106

View All Listings by this Company

Print This Approval


#2207905

Wall mounted thermostatic shower valve (chrome plated brass), incorporating a ceramic disc diverter cartridge controlling the flow from shower to shower with a cube operating member. The temperature is controlled independently via a thermostatic cartridge, with a cube operating member, that also incorporates a manual override button. The product is supplied with a chrome plated shower handset, shower hose and riser rail assembly. The inlets incorporate approved check valve cartridges, (however, the complete product has not been fully tested to demonstrate that it provides backflow protection), chrome plated spherical ball valves and stainless-steel strainers with EPDM gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2207905
Size:
15mm compression
Marking:
Bristan on mixer body
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2027
Model:
QD SHXDIVFF C
Product Images

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 149 of 444

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.