Deck mounted spout outlets (brass body - various finishes). Maximum operating temperature 65°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240602005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½" BSP (M)

Marking:

Lefroy Brooks logo on underside of spout

Installation Requirements:

R001 R010 R040

Expiry date:

30/06/2029

Model:

PSH003 YY First group of six letters and numbers – This is the product identification code. This remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the finish. Available surface finishes are, but not limited to: - CP - Polished Chrome - NK - Polished Nickel - BC - Brushed Chrome - BN - Brushed Nickel - PB - Polished Brass - BPB - Brushed Brass - AB - Aged Brass - TA - Taunton - AG - Antique Gold - HRG - Hard Rubbed Gold - CM - Champagne Gold - BCM - Brushed Champagne Gold - CO - Copper - MBC - Matt Black Chrome

Approval Holder:

Lefroy Brooks

Company Name

Lefroy Brooks

Address

Unit 3 Marston Industrial Estate Marston Road Wolverhampton

Postcode

WV2 4LX

Country

United Kingdom

Phone

01902 390 891

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of Fusion One and Fusion Pro chemical dosing systems. The Fusion One models are housed in a single cabinet capable of delivering one product but can be linked together to create multiple configurations. The Fusion Pro models are housed in a different cabinet capable delivering multiple products via a select valve. Maximum working pressure 6.5 bar. Maximum operating temperature 50°C.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

240504708

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

IRN R160 applies when the dosing system uses chemicals no greater than a Fluid Category 3 risk. Appropriate, additional backflow protection is required for chemicals greater than Fluid Category 3 risk.

Size:

¾” GHT (F)

Marking:

Dema, Fusion and PR on adhesive label on housing.

Installation Requirements:

R001 R040 R120 R160

Expiry date:

31/05/2029

Model:

644G.A1C.E0 FUSION ONE,633.GAPE.B1 FUSION ONE,633.GAPE.B4,FUSION ONE,681GAPE.2P,FUSION ONE, 701GE FUSION PRO,702GE FUSION PRO,703GE FUSION PRO 704GE FUSION PRO,722GE FUSION PRO & 730GE FUSION PRO, 731GE FUSION PRO

Product Images

Approval Holder:

Dema Engineering Company

Company Name

Dema Engineering Company

Address

MAAST 24, 3891 KE, ZEEWOLDE, NETHERLANDS

View All Listings by this Company

Manufacturer:

Dema Engineering Company

Company Name

Dema Engineering Company

Address

MAAST 24, 3891 KE, ZEEWOLDE, NETHERLANDS

View All Listings by this Company

Range of filling loop assemblies consisting of an in-line isolation valve, in-line double check valve assembly which also incorporates an isolation valve (suitable for back flow protection against fluid category 3) and stainless steel braided EPDM lined hose. The isolation valves are operated via a single lever. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1015 Filling Loop

Size:

See model

Marking:

MF, DN, PN, SIZE and year of manufacture (YYYY) stamped on ferrule. MF, WRAS, CR, size and flow arrow on check valve assembly.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

MFILLOOP: 15mm DCV x 15mm straight ISO, DN10 MFILLOOPT: 15mm DCV x 15mm Tee ISO, DN10 MFILLOOP24: 15mm DCV&ISO x 15mm straight ISO, DN10

Approval Holder:

Masterflow Products Limited

Company Name

Masterflow Products Limited

Address

Globall House 95 Vantage Point West Mindlands

Postcode

DY6 7FT

Country

United Kingdom

View All Listings by this Company

Range of in-line carbon block water filters and housings with polypropylene bodies. Maximum working pressure 8.0 bar. Cold water use only.

Section:

1050 Filters and Housings

Size:

¼” pushfit or 3/8” pushfit inlet connection.

Marking:

AquaHouse (brand of Water Filter Man Ltd), model number & technical info on adhesive label on body.

Installation Requirements:

R001 R008 R120 R150 R170

Expiry date:

28/02/2029

Model:

¼” pushfit inlet connection: AH-L04

Approval Holder:

Water Filter Man Ltd

Company Name

Water Filter Man Ltd

Address

Unit 1-2 Parkside Industrial Estate Hickman Avenue Wolverhampton

Postcode

WV1 2EN

Country

United Kingdom

View All Listings by this Company

Range of press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404055

Size:

see models

Marking:

STH & size etched on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

74102 15MM STRAIGHT COUPLING PRESS 74103 22MM STRAIGHT COUPLING PRESS 74104 28MM STRAIGHT COUPLING PRESS 74105 35MM STRAIGHT COUPLING PRESS 74106 42MM STRAIGHT COUPLING PRESS 74107 54MM STRAIGHT COUPLING PRESS 74108 15MM SLIP COUPLING PRESS 74109 22MM SLIP COUPLING PRESS 74110 28MM SLIP COUPLING PRESS 74111 35MM SLIP COUPLING PRESS 74112 42MM SLIP COUPLING PRESS 74113 54MM SLIP COUPLING PRESS 74114 22X15MM REDUCED COUPLING PRESS 74115 28X15MM REDUCED COUPLING PRESS 74116 28X22MM REDUCED COUPLING PRESS 74117 35X15MM REDUCED COUPLING PRESS 74118 35X22MM REDUCED COUPLING PRESS 74119 35X28MM REDUCED COUPLING PRESS 74120 42X15MM REDUCED COUPLING PRESS 74121 42X22MM REDUCED COUPLING PRESS 74122 42X28MM REDUCED COUPLING PRESS 74123 42X35MM REDUCED COUPLING PRESS 74124 54X15MM REDUCED COUPLING PRESS 74125 54X22MM REDUCED COUPLING PRESS 74126 54X28MM REDUCED COUPLING PRESS 74127 54X35MM REDUCED COUPLING PRESS 74128 54X42MM REDUCED COUPLING PRESS 74129 22X15MM FITTNG REDUCER PRESS 74130 28X15MM FITTNG REDUCER PRESS 74131 28X22MM FITTNG REDUCER PRESS 74132 35X15MM FITTNG REDUCER PRESS 74133 35X22MM FITTNG REDUCER PRESS 74134 35X28MM FITTNG REDUCER PRESS 74135 42X15MM FITTNG REDUCER PRESS 74136 42X22MM FITTNG REDUCER PRESS 74137 42X28MM FITTNG REDUCER PRESS 74138 42X35MM FITTNG REDUCER PRESS 74139 54X15MM FITTNG REDUCER PRESS 74140 54X22MM FITTNG REDUCER PRESS 74141 54X28MM FITTNG REDUCER PRESS 74142 54X35MM FITTNG REDUCER PRESS 74143 54X42MM FITTNG REDUCER PRESS 74144 15MM 90D EQUAL ELBOW PRESS 74145 22MM 90D EQUAL ELBOW PRESS 74146 28MM 90D EQUAL ELBOW PRESS 74147 35MM 90D EQUAL ELBOW PRESS 74148 42MM 90D EQUAL ELBOW PRESS 74149 54MM 90D EQUAL ELBOW PRESS 74150 15MM 90D STREET ELBOW PRESS 74151 22MM 90D STREET ELBOW PRESS 74152 28MM 90D STREET ELBOW PRESS 74153 35MM 90D STREET ELBOW PRESS 74154 42MM 90D STREET ELBOW PRESS 74155 54MM 90D STREET ELBOW PRESS 74156 15MM 45D EQUAL ELBOW PRESS 74157 22MM 45D EQUAL ELBOW PRESS 74158 28MM 45D EQUAL ELBOW PRESS 74159 35MM 45D EQUAL ELBOW PRESS 74160 42MM 45D EQUAL ELBOW PRESS 74161 54MM 45D EQUAL ELBOW PRESS 74162 15MM 45D STREET ELBOW PRESS 74163 22MM 45D STREET ELBOW PRESS 74164 28MM 45D STREET ELBOW PRESS 74165 35MM 45D STREET ELBOW PRESS 74166 42MM 45D STREET ELBOW PRESS 74167 54MM 45D STREET ELBOW PRESS 74168 15MM STOP END PRESS 74169 22MM STOP END PRESS 74170 28MM STOP END PRESS 74171 35MM STOP END PRESS 74172 42MM STOP END PRESS 74173 54MM STOP END PRESS 74174 15MM EQUAL TEE PRESS 74175 22MM EQUAL TEE PRESS 74176 28MM EQUAL TEE PRESS 74177 35MM EQUAL TEE PRESS 74178 42MM EQUAL TEE PRESS 74179 54MM EQUAL TEE PRESS 74180 15MM PART CROSSOVER PRESS 74181 22MM PART CROSSOVER PRESS 74182 15MM FULL CROSSOVER PRESS 74183 22MM FULL CROSSOVER PRESS 74184 22X15MM REDUCED ELBOW PRESS 74185 22X15X15MM REDUCING TEE PRESS 74186 22X15X22MM REDUCING TEE PRESS 74187 28X22X22MM REDUCING TEE PRESS 74188 28X22X28MM REDUCING TEE PRESS 74189 22X22X15MM REDUCING TEE PRESS 74190 28X28X15MM REDUCING TEE PRESS 74191 28X28X22MM REDUCING TEE PRESS 74192 35X35X15MM REDUCING TEE PRESS 74193 35X35X22MM REDUCING TEE PRESS 74194 35X35X28MM REDUCING TEE PRESS 74195 42X42X15MM REDUCING TEE PRESS 74196 42X42X22MM REDUCING TEE PRESS 74197 42X42X28MM REDUCING TEE PRESS 74198 42X42X35MM REDUCING TEE PRESS 74199 54X54X15MM REDUCING TEE PRESS 74200 54X54X22MM REDUCING TEE PRESS 74201 54X54X28MM REDUCING TEE PRESS 74202 54X54X35MM REDUCING TEE PRESS 74203 54X54X42MM REDUCING TEE PRESS

Approval Holder:

STH Westco Limited

Company Name

STH Westco Limited

Address

Unit C6 William Way Moss Industrial Estate St Helens Road Leigh

Postcode

WN7 3PT

Country

United Kingdom

Phone

01942 265230

General Email

john.gartshore@westco.co.uk

View All Listings by this Company