In-line non-verifiable check valve assembly with integral isolation valve. Consisting of spring loaded resilient trim check valve cartridge housed within a DZR brass body, verified by test (suitable for backflow protection against Fluid Category 2). Compression connection to be used with copper pipe to BS EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

0030 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.

WRAS Approval Number:

240904001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression

Marking:

EN1254-2 15MM Justlink or jianglin WRAS and year of manufacture (YYYY), CR, flow arrow on body

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

ISOBVFL1401

Approval Holder:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Manufacturer:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a pull-down spray with a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

240704033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

Lanbiao etched on operating member.

Installation Requirements:

R001 R009 R010 R090

Expiry date:

31/07/2029

Model:

F1214-** Pull down kitchen mixer. ‐**Represents the following different surface treatments: 1. H‐Black 2. N‐ Nickel Brushed 3. GJS‐ Zirconium gold brushed 4. G‐ Zirconium gold 5. QTSL‐ Brushed bronze bright 6. QTS‐Brushed Bronze Matte 7. TJ‐ Titanium 8. TJLS‐ Titanium brushed 9. MGJ‐ Rose gold 10. MGJL‐ Rose gold brushed 11. HGT‐ Red bronze 12. HTL‐ Brushed brass 13. HTS‐ Brushed copper 14. PVDQH‐Gun Ash 15. HQ‐Gun Ash Brushed 16. Q‐Bronze 17. DYB‐Electrophoresis Matt White 18. STS‐Acid copper brushed 19. BZ‐Spray pearl white 20. B‐Spray matt white 21. DMGJ‐ Light Rose Gold

Approval Holder:

Taizhou Lanbiao Sanitary Ware Co., Ltd

Company Name

Taizhou Lanbiao Sanitary Ware Co., Ltd

Address

XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG

Postcode

317600

Country

China

Phone

13736601565

General Email

984458082@qq.com

View All Listings by this Company

Manufacturer:

Taizhou Lanbiao Sanitary Ware Co., Ltd

Company Name

Taizhou Lanbiao Sanitary Ware Co., Ltd

Address

XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG

Postcode

317600

Country

China

Phone

13736601565

General Email

984458082@qq.com

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembies (brass bodies – various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240604014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The products are supplied with a lever type waste set – not verified by test.(see models) The products are supplied with a push down waste set. (see models)

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP (F) captive nut end connections.

Marking:

Hansgrohe on body or operating member.

Installation Requirements:

R001 R008 R010 R006

Expiry date:

30/06/2029

Model:

73 311 xx0 hansgrohe Tecturis S Single lever basin mixer 110 without waste set 73 312 xx0 hansgrohe Tecturis S Single lever basin mixer 110 CoolStart without waste set 73 313 xx0 hansgrohe Tecturis S Pillar tap 80 with lever handle for cold water or pre-adjusted water without waste set 73 314 xx0 hansgrohe Tecturis S Single lever basin mixer 110 CoolStart with pop-up waste set 73 320 xx0 hansgrohe Tecturis SSingle lever basin mixer 110 Fine CoolStart with push-open waste set 73 321 xx0 hansgrohe Tecturis S Single lever basin mixer 110 Fine CoolStart without waste set 73 323 xx0 hansgrohe Tecturis S Single lever basin mixer 110 Fine CoolStart with pop up-waste set 73 340 xx0 hansgrohe Tecturis S Single lever basin mixer 150 Fine CoolStart with push-open waste set 73 341 xx0 hansgrohe Tecturis S Single lever basin mixer 150 Fine CoolStart without waste set 73 370 xx0 hansgrohe Tecturis S Single lever basin mixer 240 Fine CoolStart for wash bowls with push-open waste set 73 372 xx0 hansgrohe Tecturis S Single lever basin mixer 240 Fine CoolStart for wash bowls without waste set 73 301 xx0 hansgrohe Tecturis S Single lever basin mixer 80 CoolStart EcoSmart+ without waste set 73 302 xx0 hansgrohe Tecturis S Single lever basin mixer 80 CoolStart EcoSmart+ with pop-up waste set 73 001 xx0 hansgrohe Tecturis E Single lever basin mixer 80 Cool Start EcoSmart+ without waste set 73 002 xx0 hansgrohe Tecturis E Single lever basin mixer 80 CoolStart EcoSmart+ with pop-up waste set 73 010 xx0 hansgrohe Tecturis E Single lever basin mixer 110 EcoSmart+ with pop-up waste set 73 011 xx0 hansgrohe Tecturis E Single lever basin mixer 110 EcoSmart+ without waste set 73 012 xx0 hansgrohe Tecturis E Single lever basin mixer 110 CoolStart EcoSmart+ without waste set 73 013 xx0 hansgrohe Tecturis E Pillar tap 80 EcoSmart+ with lever handle for cold water or pre-adjusted water without waste set 73 014 xx0 hansgrohe Tecturis E Single lever basin mixer 110 CoolStart EcoSmart+ with pop-up waste set 73 020 xx0 hansgrohe Tecturis E Single lever basin mixer 110 Fine CoolStart EcoSmart+ with push-open waste set 73 021 xx0 hansgrohe Tecturis E Single lever basin mixer 110 Fine CoolStart EcoSmart+ with push-open waste set 73 023 xx0 hansgrohe Tecturis E Single lever basin mixer 110 Fine CoolStart EcoSmart+ with pop up-waste set 73 040 xx0 hansgrohe Tecturis E Single lever basin mixer 150 Fine CoolStart EcoSmart+ with push-open waste set 73 041 xx0 hansgrohe Tecturis E Single lever basin mixer 150 Fine CoolStart EcoSmart+ without waste set 73 070 xx0 hansgrohe Tecturis E Single lever basin mixer 240 Fine CoolStart EcoSmart+ for wash bowls with push-open waste set 73 072 xx0 hansgrohe Tecturis E Single lever basin mixer 240 Fine CoolStart EcoSmart+ for wash bowls without waste set 73 310 xx0 hansgrohe Tecturis S Single lever basin mixer 110 EcoSmart+ with pop up waste set Additional information. (list any further information regarding the product or range, e.g.: key for model code, prefix/suffixes describing finishes, variants of operating member, etc.) Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of deck mounted, single-holed, single outlet (fixed) combination tap assemblies (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Models (TVW105002000xx, TVW105003000xx, TVW105101110xx & TVW105141110xx) are supplied with lever operated pop-up wastes (not verified by test) Model TVW105105110xx) is supplied with a click type pop-up waste (verified by test). Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240688005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Model TVW105001110xx - ½” BSP (M). All other models Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.

Marking:

Villeroy & Boch logo on operating members.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/06/2029

Model:

TVW105002000xx TVW105003000xx TVW105101110xx TVW105141110xx TVW105105110xx TVW105001110xx TVW105141111xx TVW105103110xx Where xx denotes the surface finish (which is a non-water contact part): 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite.

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (brass body - various finishes), incorporating ceramic cartridge headworks with a single lever operating member. The spout outlet incorporates a plastic flow straightener or plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240202090

Size:

Stainless Steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections

Marking:

CPS etched on body.

Installation Requirements:

R001 R006 R010

Expiry date:

28/02/2029

Model:

158714 Corte Monobloc Sink Mixer Chrome

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Country

United Kingdom

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company