Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250804007

Range of flexible hoses assemblies incorporating a braided outer with TPSiV liner and various brass end connections. Maximum operating temperature 85°C. Open outlet use only.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 250804007
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Marking:: FQR , date of manufacture (YY), nominal diameter & WRAS on ferrule.
Installation Requirements:: R001
Expiry date:: 31/08/2030
Model:: P6K, P6KL, P6KZ - DN6 available with the following end connection options: 8X1, 10x1, 12X1, 15x1, 14x1, F1/2, F15X1, F14X1, M3/8, F3/8 conical, F1/2 conical & T8. P9K, P9KL, P9KZ - DN8 available with the following end connection options: 10x1, 12X1, 15x1, 14x1, F1/2, F15X1, F14X1, M3/8, F3/8 conical, F1/2 conical & T8.

Approval Holder:: F.Q.R. Frattini S.R.L.

Company Name
F.Q.R. Frattini S.R.L.
Address
Via Per Borgomanero 71 Briga Novarese (No)
Postcode
28010
Country
Italy
Phone
+39 0322 94100
General Email
fqr3@fqrfrattini.com

View All Listings by this Company

WRAS Approval Number: #241015017

Stainless steel braided hoses, incorporating a dual layered hose consisting of a clear PE liner and black coloured EPDM outer layer. The Click Seal 1TF300UKCSV model incorporates an isolation valve. The compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 241015017
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model code: 1TFaaabbccd aaa = length of hose in mm bb = Location (United Kingdom) cc = ClickSeal d = V – Isolation Valve
Marking:: Coastal, WRAS and date of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: DN8 bore diameter hose. 1TF300UKCSV = ½” BSP (F) CS x 15mm compression with isolation valve. 1TF300UKCS = ½” BSP (F) CS x 15mm compression. 1TF500UKCS = ½” BSP (F) CS x 15mm compression.

Approval Holder:: Fluidmaster UK

Company Name
Fluidmaster UK
Address
Twyford Road Rotherwas Industrial Estate Hereford
Postcode
HR2 6JR

View All Listings by this Company
Manufacturer:: Coastal (Ningbo) Hardware Mfg Co Ltd

Company Name
Coastal (Ningbo) Hardware Mfg Co Ltd
Address
28# Tianlongshan Road Ningbo Economic & Technology Development Zone Ningbo
Country
China

View All Listings by this Company

WRAS Approval Number: #250412002

Range of stainless steel or nylon braided, PEX lined flexible hose assemblies with various brass end connections. Maximum working pressure 10.0 Bar. Maximum operating temperature 85 °C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250412002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Justlink, WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001 R008
Expiry date:: 30/04/2030
Model:: JL – A*B – XX – D – 2 – XXX Where model = JL – Connection A * Connection B – DN – Outer braided material – Inner tube material – Length JL = abbreviation of manufacturer’s company name Jianglin. A*B = Connection A and Connection B. XX = DN (Dimension from 06 to 10): DN6 = 06, DN8 = 08, DN10 = 10. D = Outer braided material, SS = stainless steel wire, SN = stainless steel wire plus black nylon wire, N = Nylon Braided. Inner tube material, 2 = PEX XXX = Length (15cm to 200cm) 015 = 15cm … 200 = 200cm For example: JL-09*11-08-SS-2-045 would be for F1/2 x F1/2 elbow, DN8, stainless steel braided, PEX inner tube, 45cm long. DN6 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12‐110) with single O‐ring 20= M10*(12‐110) with single O‐ring 21= M11*(12‐110) with single O‐ring 22= M12*(12‐110) with single O‐ring 24= M15*(12‐110) with single O‐ring 26= F15 29= 10mm compression fitting 30= 12mm compression fitting 31= 15mm compression fitting 33= 15mm isolation valve 35= 10mm pushfit 36= 12mm pushfit 37= 15mm pushfit 39= 10mm pushfit isolation valve 40= 12mm pushfit isolation valve 41= 15mm pushfit isolation valve 45= M8*(12‐110) with double O-ring 46= M10*(12‐110) with double O-ring 47= M11*(12‐110) with double O-ring 48= M12*(12‐110) with double O-ring 50= M15*(12‐110) with double O-ring DN8 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 19= M8*(12‐110) with single O‐ring 20= M10*(12‐110) with single O‐ring 21= M11*(12‐110) with single O‐ring 22= M12*(12‐110) with single O‐ring 24= M15*(12‐110) with single O‐ring 26= F15 29= 10mm compression fitting 30= 12mm compression fitting 31= 15mm compression fitting 33= 15mm isolation valve 35= 10mm pushfit 36= 12mm pushfit 37= 15mm pushfit 39= 10mm pushfit isolation valve 40= 12mm pushfit isolation valve 41= 15mm pushfit isolation valve 45= M8*(12‐110) with double O-ring 46= M10*(12‐110) with double O-ring 47= M11*(12‐110) with double O-ring 48= M12*(12‐110) with double O-ring 50= M15*(12‐110) with double O-ring DN10 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 20= M10*(12‐110) with single O‐ring 21= M11*(12‐110) with single O‐ring 22= M12*(12‐110) with single O‐ring 24= M15*(12‐110) with single O‐ring 30= 12mm compression fitting 31= 15mm compression fitting 33= 15mm isolation valve 35= 10mm pushfit 36= 12mm pushfit 37= 15mm pushfit 39= 10mm pushfit isolation valve 40= 12mm pushfit isolation valve 41= 15mm pushfit isolation valve 46= M10*(12‐110) with double O-ring 47= M11*(12‐110) with double O-ring 48= M12*(12‐110) with double O-ring 50= M15*(12‐110) with double O-ring

Approval Holder:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang
Postcode
317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company
Manufacturer:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang
Postcode
317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company

WRAS Approval Number: #250412004

Stainless steel braided hose incorporating an EPDM liner and NBR ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250412004
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: B404-A 1/2” BSP (F) X M10*1 B405-A 3/8” BSP (F) X M10*1
Marking:: Jiasiya, WRAS & year of production (YYYY) on nut.
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: B404-A B405-A

Approval Holder:: Kaiping Jiasiya Sanitary Ware Co, Ltd.

Company Name
Kaiping Jiasiya Sanitary Ware Co, Ltd.

View All Listings by this Company

WRAS Approval Number: #2103353

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103353
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: HOSE 1000 available with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring
Marking:: Intatec logo, WRAS and date of manufacture (YYYY) on ferrule
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: HOSE 1000

Approval Holder:: Intatec Limited

Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company