Range of commercial front loading, hood type & utensil washer type dishwashing machines with flow controlled by solenoid and discharged via type AB air gap (verified by test - suitable for backflow protection against fluid category 5) . The products are supplied with a grey coloured PVC supply hose. Maximum working pressure 6.0 bar. Maximum operating temperature 90°C.

Section:

2390 Washing Machines

Section Subtitle:

Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2109354

Size:

¾” BSP Captive nut.

Marking:

Hobart, manufacturers address, model no, serial no and other technical information on front casing.

Installation Requirements:

R001 R009 R520 R574

Expiry date:

30/09/2026

Model:

Frond loading: Design State: FG-16-01 Device Code: G404W-12B, G404SW-12B, G504W-10B, G504SW-10B, F504W-20B, F504SW-20B Design State: GCB-13-04 Device Code: ECO+G415W-10C, ECO+G415SW-10C Design State: GC-18-01 Device Code: GCW-10B, GCSW-20B, GCROIW-10B, GCPW-10B, GCPROIW-10B, GPW-10B, GPSW-10B, GPCROIW-10B Design State: FXB-12-04 Device Code: ECO+G515W-10C, ECO+G515SW-10C, ECO+F515W-10C, ECO+F515SW-10C Design State: FX-18-01 Device Code: FXW-10B, FXSW-10B, FXLW-10B, FXLSW-10B, FXSTDW-10B, careSW-10B, FPW-10B, FPSW-10B, GXCW-11B, GXCSW-11B, GXCROIW-11B, GXW-11B, GXSW-11B Hood type: Design State: AM-14-02 Device Code: H604W-12B, H604SW-12B Design State: AMB-14-03 Device Code: ECO+H615W-10C, ECO+H615SW-10C Design State: AMX-14-02 Device Code: AM900W-10B, AM900SW-10B, , AMXW-10B, AMXSW-10B ,AMXRW-10B, AMXRSW-10B, AMXXW-10B, AMXXSW-10B, AMXXRW-10B, AMXXRSW-10B, AUPW-10B, AUPSW-10B, AUPRSW-10B, AMXTW-10B, AUPTW-10B, AMXXLW-10B, AMXXLSW-10B, AUPLW-10B, AUPLSW-10B, Design State: TLW-18-01: Device Code: TLWW-10A, TLWSW-10A Utensil washer: Design State: UX-15-01 Device Code: UX-10A, UXS-10A, UXC-10A, UXCS-10A, UXRC-10A, UXRCS-10A, UXT-10A, UXTC-10A, UXTRC-10A, UXTH-10A, UXTLH-10A, UXTHR-10A, UXTLHR-10A, UP-10A, UPC-10A, UPRC-10A, UPT-10A, UPTC-10A, UPTRC-10A Design State: U-15-01 Device Code: ECOMAX702-11A, ECOMAX702W-11A Models added June 2022: Frond loading Design State: FXB-12-04 Device Code: FXBSW-10C, FXBSW-15C, FXBW-10C, FXLBSW-10C, GXBSW-11C, GXCBSW-11C Hood type Design State: AMB-14-03 Device Code: AMXBSW-10C, AMXBW-10C, AMXXBRSW-10C Utensil washer Design State: UXB-15-01 Device Code: UXB-10C, UXBS-10C, UXTB-10C, UXTHB-10C, UXTLHB-10C Explanation: “Design State” defines the type of Machine and the Production-Generation “Device Code” defines the Order Code for a special equipped machine

Product Images

Approval Holder:

Hobart GmbH

Company Name

Hobart GmbH

Address

Robert-Bosch-Str. 17 77656 Offenburg

Country

Germany

Phone

+49 781 600-0

General Email

info@hobart.de

View All Listings by this Company

Manufacturer:

Hobart GmbH

Company Name

Hobart GmbH

Address

Robert-Bosch-Str. 17 77656 Offenburg

Country

Germany

Phone

+49 781 600-0

General Email

info@hobart.de

View All Listings by this Company

Range of electrolytic scale inhibitors incorporating copper bodies. For use with copper pipe complying with BS EN 1057. Maximum working pressure 10.0 bar. Maximum operating temperature 40°C.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Size:

Please refer to model.

Marking:

GAOBO and WRAS on body.

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

31/07/2026

Model:

7568230011: 15mm push-fit. 7568260011: 15mm push-fit. 7568320011: 15mm push-fit. 7568192211: 15mm compression. 7568156211: 22mm compression. 7568202211: 14.7mm compression. 7568175211: 21.15mm compression.

Product Images

Approval Holder:

Zhejiang Gaobo Sanitary Wares Co Ltd

Company Name

Zhejiang Gaobo Sanitary Wares Co Ltd

Address

Xiaqiu, Yuhuan Sci-Tech Industrial Area, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Gaobo Sanitary Wares Co Ltd

Company Name

Zhejiang Gaobo Sanitary Wares Co Ltd

Address

Xiaqiu, Yuhuan Sci-Tech Industrial Area, Zhejiang

Country

China

View All Listings by this Company

Silver and copper disinfection ion generator with a plastic body, incorporating a plastic flow switch. Maximum working pressure 9.0 bar. For cold water use only

Section:

2415 Water conditioners - Disinfectant ion generators

WRAS Approval Number:

2107067

Note:

This product actively uses copper for microorganism control purposes. These are subject to the EU Biocidal Products Regulation EU 528/2012. The EU Commissions’ decision of 13 February and 26 June 2014 granted the UK limited essential use derogations only for the control of legionella and limits the range of applications where this product can be used. Users should ensure these types of products are used in accordance with the authorisations issued by the HSE. Users should refer to the HSE website to keep themselves up to date on progress or for further information – www.hse.org.uk/ legionnaires/faqs.htm

Size:

22mm spigot inlet & 22mm push fit outlet.

Marking:

ProEconomy Limited and Ray on adhesive label on body

Installation Requirements:

R001 R150 R170 R290 R415

Expiry date:

31/07/2026

Model:

Ray unit

Product Images

Approval Holder:

ProEconomy Ltd.

Company Name

ProEconomy Ltd.

Address

23 Beaufort Court, Roebuck Way, Knowlhill, Milton Keynes

Postcode

MK5 8HL

View All Listings by this Company

Manufacturer:

ProEconomy Ltd.

Company Name

ProEconomy Ltd.

Address

23 Beaufort Court, Roebuck Way, Knowlhill, Milton Keynes

Postcode

MK5 8HL

View All Listings by this Company

Range of ion exchange water softeners (salt regenerated) for domestic use. Maximum working pressure 6.0 bar. Cold water use only.

Section:

2450 Water softeners

Size:

¾” BSP (M) inlet/outlet or 1” BSP (M) inlet/outlet

Marking:

Monarch Company details, model and other product info on adhesive label on rear of body. Model on front

Installation Requirements:

R001 R150 R170 R290 R415

Expiry date:

30/04/2026

Proviso:

Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.

Model:

Mini Aqua HE CS100HE PROSOFT100HE EVER 9 Midi HE CS150HE PROSOFT150HE EVER 12 Master HE CS200HE PROSOFT200HE EVER 18 Matrix HE CS300HE PROSOFT300HE EVER 30 PS12 HE PS15 HE GS4000 HE GS6000 HE LPS HE PROSOF 120 XE PROSOFT 120 XE PROSOF 160 XE PROSOFT 160 XE PROSOF 350 XE PROSOFT 350 XE SOF3000HE SOF6000HE

Approval Holder:

Monarch Water Ltd

Company Name

Monarch Water Ltd

Address

Fair Green Diss Norfolk

Postcode

IP22 4DG

Country

United Kingdom

Phone

01986 784759

General Email

kdelaney@monarchwater.co.uk

View All Listings by this Company

'Droople DRP-M90-IMP'. White coloured, injection moulded acetal cogwheel. For use with water up to 65°C.

Section:

5010 Acetal (Components)

Expiry date:

31/07/2026

Approval Holder:

Droople SA

Company Name

Droople SA

Address

Route du Verney 18, 1070 Puidoux

Country

Switzerland

View All Listings by this Company