Directory Search Results

Print List

#250302720

Range of in-line non-verifiable double check valve assemblies consisting of a spring loaded resilient trim single check valve cartridge housed within a DZR brass body Maximum working pressure: 16.0 Bar Maximum operating temperature: 65°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
250302720
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
Reliance Worldwide Corporation ‘R’ logo, flow arrow, CR & size on body
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
K74236 - 1¼” BSP (F) inlet/outlet K74237 - 1½” BSP (F) inlet/outlet K74238 - 2” BSP (F) inlet/outlet

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company
Manufacturer:
Reliance Worldwide Corporation (UK)
Company Name
Reliance Worldwide Corporation (UK)
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company
Manufacturer:
Reliance Worldwide Corporation (UK)
Company Name
Reliance Worldwide Corporation (UK)
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#250502709

Non-verifiable double check valve assembly with DZR brass body consisting of two spring loaded, resilient trim in-line check valve cartridges, incorporating a lever operated spherical valve. Maximum working pressure 10 Bar Cold water use

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
250502709
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (F) inlet/outlet
Marking:
Edwards standpipes, CR, size, pressure and flow arrow on body
Installation Requirements:
R001
Expiry date:
31/05/2030
Model:
ITEMA50568 Non-verifiable double check valve

Approval Holder:
Edwards Engineering Ltd
Company Name
Edwards Engineering Ltd
Address
Medley Park Craven Arms Shropshire
Postcode
SY7 9LL

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co. Ltd.
Company Name
IDC Fluid Control Co. Ltd.
Address
3RD FLOOR UNIT 2 SECTION A
Country
ZHAOWEI SCIENCE & TECNOLOGY

View All Listings by this Company

Print This Approval


#250515006

Range of ceramic cartridge headworks with plastic bodies. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
250515006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
ZHEJIANG MINGDI CERAMIC CARTRIDGE CO., LTD logo and XIN MING DI on body.
Installation Requirements:
R001
Expiry date:
31/05/2030
Model:
92130008A: Ø 29.76mm, 92330002A: Ø 29.75mm.

Approval Holder:
Zhejiang Mingdi Ceramic Cartridge Co., Ltd
Company Name
Zhejiang Mingdi Ceramic Cartridge Co., Ltd
Address
Bingang Industrial Zone, Shamen Town, Yuhuan City, Zhejiang Province, 317607
Country
China

View All Listings by this Company

Print This Approval


#250502708

Range of single hole, single outlet (swivel) combination tap assemblies incorporating a brass body (various finishes) and ceramic cartridge headwork with single lever operating members. The outlets incorporate a plastic aerator. Model 63785-00XX incorporates a pull-out spray with push button trigger assembly. The pull-out spray incorporates a single check valve assembly (however the complete unit has not been tested to demonstrate it provides adequate backflow protection). Model 63787-00XX incorporates a pull-down outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
250502708
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, PEX lined flexible hose assemblies with ½” BSP (F) end connections.
Marking:
Lota on base of tap
Installation Requirements:
R001 R009 R090
Expiry date:
31/05/2030
Model:
63785-00XX & 63787-00XX Where XX denotes the finish and can be replaced with any of the following: 01 = Chrome, 0111 = Chrome 3+, 6801 = Matt Black, 4403 = Brushed Brass, 08 = Stainless Steel 5806 = Slate, 0402 =B rushed Nickel, 5804 = gun metal

Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China

View All Listings by this Company

Print This Approval


#250502009

Range of single hole, single outlet, fixed combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Model 33528671 is supplied with a lever type pop up waste – not verified by test. Maximum working pressure - 10 Bar Maximum operating temperature - 70 °C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250502009
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections
Marking:
Dornbracht on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2030
Model:
33528671 with pop-up waste 33526671 without pop-up waste

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1376 of 1770

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.