Shower wastewater heat recovery unit, consisting of a PVC-U waste pipe with an internal copper tube which provides a double wall separation between the wastewater and cold mains supply. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:

1350 Heat Exchangers

WRAS Approval Number:

240602021

Note:

Claims made by the manufacturer on the heat recovery performance have not been assessed as part of the approval.

Size:

½” BSP (M)

Marking:

Zypho logo on body. Zypho logo, model and other information on adhesive label on side of body.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

ZYSL50GDTP Zypho Slim 50

Approval Holder:

Zypho, SA

Company Name

Zypho, SA

Phone

+351 210 991 351

General Email

b2b@zypho.pt

View All Listings by this Company

Manufacturer:

Zypho, SA

Company Name

Zypho, SA

Phone

+351 210 991 351

General Email

b2b@zypho.pt

View All Listings by this Company

Range of electric instantaneous heated showers, incorporating a solenoid valve to control the flow. Products are supplied with a shower hose and handset. Maximum supply pressure 10 bar. Maximum operating temperature 45°C.

Section:

1370 Heaters

Section Subtitle:

Electric instantaneous, shower hose. Heat retained in instantaneous water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

240604704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression.

Marking:

Mira, advanced and model on body and adhesive label on the underside.

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

1.1785.001 - MIRA ADVANCE 8.7KW, 1.1785.002 - MIRA ADVANCE 9.8KW, 1.1785.003 - MIRA ADVANCE 8.7KW FLEX, 1.1785.004 MIRA ADVANCE 9.8KW FLEX, 1.1785.005 MIRA ADVANCE 8.7KW FLEX EXTRA, 1.1785.006 MIRA ADVANCE HEATLOOP 8.7KW,

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of water meters with brass bodies and plastic impellers. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾" BSP (M) (DN15), 1" BSP (M) (DN20), 1¼" BSP (M) (DN25), 1½" BSP (M) (DN32), 2" BSP (M) (DN40), 2½" BSP (M) (DN50).

Marking:

NWM, Ningbo Water Meter Co., Ltd logo and technical information on meter face. Flow arrow and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

MJ-SDC range.

Approval Holder:

Ningbo Water Meter (Group) Co., Ltd

Company Name

Ningbo Water Meter (Group) Co., Ltd

Address

No 355 Hongxing Road Jiangbei District Ningbo

Country

China

View All Listings by this Company

Octave range of water meters with blue epoxy coated cast iron or plastic bodies (see models). Maximum working pressure 16.0 Bar. Maximum operating temperature 50.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

CZUS & Company logo on cap. Company Information,, product information and model range on label under the plastic lid.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

CZUS 13905XXX DN: 40 mm (Composite Body, 2" BSP (M) 1CZUS 13915XXX COMPOSITE BODY DN: 50 mm 2.1/4" BSP (M) CZUS 139XXXXX IRON BODY DN: 50-300 mm (Iron Body, 2” to 12”) 13905 & 13915: Where the XXX denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications. 139XXXXX: Where the 1st X denotes the size, and can be replaced with any of the following: 1 = 2” Flanged, 2 = 2.1/2” Flanged, 3 = 3” Flanged, 4 = 4” Flanged, 5 = 6” Flanged, 6 = 8” Flanged, 7 = 10” Flanged, 8 = 12” Flanged, Where the 2nd X denotes body type and customer specific and can be replaced with any of the following: 5 = Composite body, All other numbers = Customer specific Where the 3rd, 4th and 5th X’s denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications.

Approval Holder:

Contadores De Agua De Zaragoza S.A. (Contazara S.A.)

Company Name

Contadores De Agua De Zaragoza S.A. (Contazara S.A.)

Address

Carretera Castellon KM. 5 5 50720 Zaragoza Spain

View All Listings by this Company

Range of brass bodied differential angled bypass valves incorporating a spring-loaded adjustment facility. Maximum working pressure 10.0 bar. Maximum operating temperature 110°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

240604003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For close circuit use only.

Size:

See models.

Marking:

Caleffi logo, flow arrow, size moulded on body. Caleffi logo on cap.

Installation Requirements:

R001 R200

Expiry date:

30/04/2029

Model:

519700: 1 ¼" BSP (F), 519500: ¾” BSP (F), 519504: ¾” BSP (F), 519500 TH: ¾” BSP (F), 519500 TAK: ¾" BSP (F), 519505 IPG: ¾ BSP (F).

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company