Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #260402002

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined flexible hose assemblies with DZR brass end connections. Some models incorporate spherical valves. Pushfit and compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 260402002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: ‘Justlink’ (brand of Yuhuan Jianglin Plumbing Hose & Parts Inc.), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 30/04/2031
Model:: JL–A*B–XX–D–E–XXX. Where: A*B denotes connection size and type and can be replaced with any of the following options under each DN size (see below). XX denotes bore diameter of hose and can be replaced with any of the following: 06 = DN6, 08 = DN8, 10 = DN10, 13 = DN13, 19 = DN19. D denotes the outer braided material: SS = stainless steel wire SN = stainless steel wire plus black nylon wire N = Nylon wire E denotes the liner material: 0 = EPDM. XXX denotes the length of the hose (15cm to 200cm) and is replaced with a number, as examples: 015 = 15cm length, 100 = 100cm length, 200 = 200cm length. Size Codes: DN6 (denoted by 06) bore diameter available with the following end connections: 01 = F1/4, 02 = F1/4 elbow, 03 = M1/4, 04 = F3/8, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 19 = M8*(12-110) with single O-ring, 20 = M10*(12-110) with single O-ring, 21 = M11*(12-110) with single O-ring, 22 = M12*(12-110) with single O-ring, 23 = M14*(12-110) with single O-ring, 24 = M15*(12-110) with single O-ring, 26 = F15, 29 = 10mm compression, 30 = 12mm compression, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 35 = 10mm pushfit, 36 = 12mm pushfit, 37 = 15mm pushfit, 38 = 22mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 45 = M8*(12-110) with double O‐ring, 46 = M10*(12-110) with double O‐ring, 47 = M11*(12-110) with double O‐ring, 48 = M12*(12-110) with double O‐ring, 49 = M14*(12-110) with double O‐ring, 50 = M15*(12-110) with double O‐ring. DN8 (denoted by 08) bore diameter available with the following end connections: 03 = M1/4, 04 = F3/8, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 19 = M8*(12-110) with single O-ring, 20 = M10*(12-110) with single O-ring, 21 = M11*(12-110) with single O-ring, 22 = M12*(12-110) with single O-ring, 23 = M14*(12-110) with single O-ring, 24 = M15*(12-110) with single O-ring, 25 = M16*(12-110) with single O‐ring, 26 = F15, 27 = 15mm smooth tube, 29 = 10mm compression, 30 = 12mm compression, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 35 = 10mm pushfit, 36 = 12mm pushfit, 37 = 15mm pushfit, 38 = 22mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 43 = F1/2 plastic nut, 44 = F3/4 plastic nut, 45 = M8*(12-110) with double O‐ring, 46 = M10*(12-110) with double O‐ring, 47 = M11*(12-110) with double O‐ring, 48 = M12*(12-110) with double O‐ring, 49 = M14*(12-110) with double O‐ring, 50 = M15*(12-110) with double O‐ring, 51 = M16*(12-110) with double O‐ring. DN10 (denoted by 10) bore diameter available with the following end connections: 04 = F3/8, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1, 20 = M10*(12-110) with single O-ring, 21 = M11*(12-110) with single O-ring, 22 = M12*(12-110) with single O-ring, 23 = M14*(12-110) with single O-ring, 24 = M15*(12-110) with single O-ring, 25 = M16*(12-110) with single O‐ring, 26 = F15, 27 = 15mm smooth tube, 30 = 12mm compression, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 35 = 10mm pushfit, 36 = 12mm pushfit, 37 = 15mm pushfit, 38 = 22mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 43 = F1/2 plastic nut, 44 = F3/4 plastic nut, 46 = M10*(12-110) with double O‐ring, 47 = M11*(12-110) with double O‐ring, 48 = M12*(12-110) with double O‐ring, 49 = M14*(12-110) with double O‐ring, 50 = M15*(12-110) with double O‐ring, 51 = M16*(12-110) with double O‐ring. DN13 (denoted by 13) bore diameter available with the following end connections: 04 = F3/8, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1, 24 = M15*(12-110) with single O-ring, 25 = M16*(12-110) with single O‐ring, 27 = 15mm smooth tube, 28 = 22mm smooth tube, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 37 = 15mm pushfit, 38 = 22mm pushfit, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 43 = F1/2 plastic nut, 44 = F3/4 plastic nut, 50 = M15*(12-110) with double O‐ring, 51 = M16*(12-110) with double O‐ring. DN19 (denoted by 19) bore diameter available with the following end connections: 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1, 19 = M8*(12-110) with single O-ring, 27 = 15mm smooth tube, 28 = 22mm smooth tube, 32 = 22mm compression, 34 = 22mm compression isolation valve, 38 = 22mm pushfit, 42 = 22mm pushfit isolation valve.

Product Images

Approval Holder:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company
Manufacturer:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company

WRAS Approval Number: #260112304

Section:: 2000 Shower Valves
Description:: A Shower valve(s) with manual temperature control.
Wall Mounted Undefinable Air Gap - See IRN's
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
1011JC45	Chrome	½” BSP (M) x ¾” BSP (M) offset union	10 bar	85 °C	HUANRI	Rear of body	No			Open Outlet

Approval Holder:: Zhejiang Huanri Sanitation Co,.Ltd.

Company Name
Zhejiang Huanri Sanitation Co,.Ltd.
Address
Xuanmen Industrial Zone, Lupu Town Yuhuan County Zhejiang Province
Country
China

View All Listings by this Company
Manufacturers:: Zhejiang Huanri Sanitation Co,.Ltd.

WRAS Approval Number: #260112301

Section:: 2010 Shower Valves
Description:: A Range of Shower valve(s) with thermostatic temperature control
Wall Mounted Concealed Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection) Model series 2702 has an additional wall outlet.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork
SD-ZJXXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD124-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD205-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD127-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD170-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD190-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD246-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD191-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD109-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD207-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD101-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD116-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD117-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD125-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD128-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD156-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD168-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD209-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD210-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD212-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD213-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD220-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD222-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD236-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD238-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc
SD240-XXXX	Chrome	3/4BSP(F)	10 bar	60 °C	SHENGDIAN,“H” and “C”	on face Panel	No	1/4 Turn ceramic disc

Notes & Further Information: XXXX represent five series shower valves and can be replaced to 2500, 2501, 2503, 2504, 2702.

Approval Holder:: Zhejiang Shengdian Sanitary Ware Co., Ltd

Company Name
Zhejiang Shengdian Sanitary Ware Co., Ltd
Address
Shangshan Industrial Zone, Qinggang, Yuhuan
Postcode
317606
Country
Zhejiang,

View All Listings by this Company
Manufacturers:: ZHEJIANG SHENGDIAN SANITARY WARE CO.LTD

WRAS Approval Number: #251088307

Section:: 2010 Shower Valves
Description:: A Range of Shower valve(s) with thermostatic temperature control
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 31/10/2030
Model:: RNDSCBV2.MB AQ150BAR2 300RSC TWBAR2.21 AQ150BAR2.MB TS150BAR2 126HP 126HP.MB AQSQBAR2 TSSQBAR2 408HP 300SSC AQSQBAR2.MB

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
RNDSCBV2.MB	Matt Black	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
AQ150BAR2	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
300RSC	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
TWBAR2.21	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
AQ150BAR2.MB	Matt Black	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
TS150BAR2	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
126HP	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
126HP.MB	Matt Black	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
AQSQBAR2	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
TSSQBAR2	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
408HP	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
300SSC	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
AQSQBAR2.MB	Matt Black	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,

Notes & Further Information: The “*” is for a different Overhead Shower, Shower Hose or Shower Handset, which represent the letters A to Z X XXX Denotes the following: First X: Different handle The second, third & fourth XXX for different finishes: Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Approval Holder:: Aqualisa Products Ltd.

Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

WRAS Approval Number: #260112009

Range of wall mounted, exposed bar type thermostatic shower blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork, with cubed/lever type operating member, which controls the flow and a thermostatic cartridge which controls the temperature, with a cubed/lever type operating member. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 260112009
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: This approval does not include a shower hose and handset.
Size:: ¾” BSP (M) x ½” BSP (M) offset union.
Marking:: GAOAO on body
Installation Requirements:: R001 R010 R040
Expiry date:: 31/01/2031
Model:: LH4400-2 & LH5400-1

Approval Holder:: ZHEJIANG GAOAO SANITARY WARE CO.,LTD.

Company Name
ZHEJIANG GAOAO SANITARY WARE CO.,LTD.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Postcode
318020
Country
China
General Email
2900324142@qq.com

View All Listings by this Company