Range of chemical dosing equipment. The outlet of the injector incorporates a connection for injection of chemicals via venturi action. Max operating pressure 5.9 bar. Cold water only

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

240704714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Only suitable for use with chemicals no greater than a FC3, additional backflow protection is required for chemicals greater than FC3. When used where the risk is greater than FC3, IRN 415 applies.

Size:

¾” BSP (F) Captive nut

Marking:

HYDRO on front panel.

Installation Requirements:

R001 R040 R160

Expiry date:

31/07/2029

Model:

HYDSP0121 LiquidSense Pro HYDSP0122 LiquidSense Pro HYDSP0123 LiquidSense Pro HYDSP6347 Penguin Pro HYDSP6348 Penguin Pro HYDSP6997 Penguin HYD85125GB EvoDose HYD850353GB EvoDose HYD859411GB EvoDose HYD39111GB Accudose 2 HYD39101GB Accudose 2

Product Images

Approval Holder:

PSG Hydro

Company Name

PSG Hydro

Address

Hochstrasse 150-152 47228 Duisburg

Country

Germany

View All Listings by this Company

Manufacturer:

PSG Hydro

Company Name

PSG Hydro

Address

Hochstrasse 150-152 47228 Duisburg

Country

Germany

View All Listings by this Company

Range of cylindrical or tubular expansion vessels with epoxy coated carbon steel bodies. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” or 1” BSP (M)

Marking:

Trade-Tec, Zilmet and technical information on adhesive label

Installation Requirements:

R001 R530

Expiry date:

30/06/2029

Model:

11GS000804 (8L Tradetec). 11GS001204 (12L Tradetec). 11GS001904 (18L Tradetec). 11GS002404 (24L Tradetec). 11GS003504 (35L Tradetec). 11GS005004 (50L Tradetec). 11GS006004 (80L Tradetec). 11GS008004 (100L Tradetec).

Product Images

Approval Holder:

Zilmet UK Limited

Company Name

Zilmet UK Limited

Address

Airfield Industrial Estate, Hixon, Stafford

Postcode

ST18 0PF

Phone

01889 272 185

General Email

sales@zilmet.co.uk

View All Listings by this Company

Manufacturer:

Zilmet Spa

Company Name

Zilmet Spa

Address

35010 Limena (Padova) Via Del Santo 242 Italy

Phone

+ 49 8840662 Fax: + 49 767321 Telex: 430181

General Email

View All Listings by this Company

Range of expansion vessels with white epoxy coated steel bodies and butyl diaphragm. Please refer to model for maximum working pressures. Maximum operating temperature 70°C. Maximum working pressure 10.0 bar (all except two models), 8.0 bar (24749 & 24809 only).

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

Airfix, Flamco, pressure/temperature, date and time of manufacture (time = hour/min/sec) (date = DD/MM/YY), CE Marking & technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

24259 - Airfix A 8 litre - Drinkwater exp. Vessel 8 litre with pre charge 4 bar, 24348 / 24349 - Airfix A 12 litre - Drinkwater exp. Vessel 12 litre with pre charge 3 / 4 bar, 24458 / 24460 / 24459Airfix A 18 litre - Drinkwater exp. Vessel 18 litre with pre charge 3 / 3.5 / 4 bar, 24558 / 24559Airfix A 25 litre - Drinkwater exp. Vessel 25 litre with pre charge 3 / 4 bar, 24659 - Airfix A 35 litre - Drinkwater exp. Vessel 35 litre with pre charge 4 bar, 24749 - Airfix A 50 litre - Drinkwater exp. Vessel 50 litre with pre charge 4 bar, 24809 - Airfix A 80 litre - Drinkwater exp. Vessel 80 litre with pre charge 4 bar.

Product Images

Approval Holder:

Flamco Limited

Company Name

Flamco Limited

Address

Washway Lane, St. Helens

Postcode

WA10 6PB

Phone

+44 (0) 1744 744 744

General Email

info@flamco.co.uk

View All Listings by this Company

Ranges of cylindrical or tubular expansion vessels with epoxy coated or uncoated steel bodies and either Butyl or EPDM membranes. Maximum working pressure of Tube models is 8.0 bar. All other models have a maximum working pressure of 10.0 bar. Maximum operating temperature 99°C.

Section:

1000 Expansion Vessels

WRAS Approval Number:

241102702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.

Size:

INOX ULTRA-PRO – 1” BSP (M), TUBE – ½” BSP (M), TURBOFLEX – ½” BSP (M) inlet and outlet.

Marking:

Zilmet and product information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

INOX ULTRA-PRO - 10 bar 22 (Type 24), 50, 60 and 100 litres (Horizontal and Vertical Stand). TUBE 8 bar - 4 litres. TURBOFLEX 10 bar- 4 litres MODELS ADDED NOVEMBER 2024: TUBE – 2L & 3L.

Approval Holder:

Zilmet UK Limited

Company Name

Zilmet UK Limited

Address

Airfield Industrial Estate, Hixon, Stafford

Postcode

ST18 0PF

Phone

01889 272 185

General Email

sales@zilmet.co.uk

View All Listings by this Company

Manufacturer:

Zilmet Spa

Company Name

Zilmet Spa

Address

35010 Limena (Padova) Via Del Santo 242 Italy

Phone

+ 49 8840662 Fax: + 49 767321 Telex: 430181

General Email

View All Listings by this Company

Range of cylindrical expansion vessels with epoxy coated or uncoated steel bodies and Butyl membranes. Maximum working pressure 10.0 Bar (15.0 bar INOX PRO 0.16L). Maximum operating temperature 99.0°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

INOX-PRO: ½” – 1” BSP (M) HYDRO-PRO: ½” – 1” BSP (M), WATER-PRO: ¾” – 1” BSP (M) HYDRO –PLUS 50LTR & WATER, PRO RANGE 80LTR – 1” BSP (M) HYDRO PLUS, HYDRO PRO, RANGE 105LTR - 600LTR - 1¼” BSP (M) HYDROCHAUD RANGE 2LTR - 50LTR - 3/4" - 1" BSP (M)

Marking:

Zilmet logo, model, max temp, pre charge pressure, capacity and other technical info on label on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

INOX-PRO - 0.16LTR (15 Bar), 0.50LTR, 0.60LTR, 1LTR, 2LTR, 8LTR, 12LTR and 18LTR. HYDRO-PLUS / HYDRO-PRO / WATER-PRO / HYDRO-PLUS E / HYDROCHAUD - 2LTR, 5LTR, 8LTR, 12LTR, 18LTR, 24LTR, 35LTR and 50LTR. HYDRO-PLUS / HYDRO-PRO / WATER-PRO - 80LTR, 105LTR, 150LTR, 200LTR, 250LTR, 300LTR, 400LTR, 450LTR, 500LTR and 600LTR. HYDRO-PLUS E - 80LTR, 105LTR, 129LTR, 150LTR, 207LTR, 300LTR and 450LTR.

Approval Holder:

Zilmet UK Limited

Company Name

Zilmet UK Limited

Address

Airfield Industrial Estate, Hixon, Stafford

Postcode

ST18 0PF

Phone

01889 272 185

General Email

sales@zilmet.co.uk

View All Listings by this Company

Manufacturer:

Zilmet Spa

Company Name

Zilmet Spa

Address

35010 Limena (Padova) Via Del Santo 242 Italy

Phone

+ 49 8840662 Fax: + 49 767321 Telex: 430181

General Email

View All Listings by this Company