Directory Search Results

Print List

#250302008

Range of wall mounted, manually operated blending valves with brass bodies (various finishes) and ceramic cartridge headworks controlling both the flow and temperature with a single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
250302008
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Needs to get installed in combination with Rapido Smart Box 35.600.
Size:
Only to be used with compatible Grohe products.
Marking:
Grohe SPA logo on rosette or Grohe logo on operating member. Models 24.259, 24.277 and 24.354 include the new Grohe SPA Logo, all other models include standard Grohe Logo.
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2030
Model:
24.259.xxx 24.277.xxx 24.354.xxx 24.071.xxx 24.069.xxx 24.065.xx3 24.067.xxx 24.063xx1 24.061.xxx 24.059.xx3 24.057.xx1 24.055.xx2 24.053.xx1 24.051.xx2 24.046.xx3 24.048.xx3 24.044.xxx 24.042.xx2 Where xxx / xx1 / xx2 / xx3 denotes finish, can be replaced by: 000 / 001 / 002 / 003– Chrome DC0 / DC1 / DC2 / DC3 – Supersteel DA0 / DA1 / DA2 / DA3 – Warm sunset AL0 / AL1 / AL2 / AL3 – Brushed hard graphite GL0 / GL1 / GL2 / GL3 – cool sunrise IG0 / IG1 / IG2 / IG3 – chrome/gold

Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930

View All Listings by this Company

Print This Approval


#250104010

Range of wall mounted concealed, shower valves (brass bodies – various plated trim sets) incorporating a ceramic cartridge headworks with single lever operating member and a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). Maximum operating pressure 10 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250104010
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Products are not supplied with a shower hose, handset, riser rail or spout outlet. Product to be used in combination with 01700180 AXOR iBox universal Basic set or 01400180 AXOR iBox universal 2 Basic set + 13588000 Adapter plate for iBox universal 2.
Size:
¾” BSP (F)
Marking:
Axor on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2030
Model:
46450xx0 46451xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval


#250302013

Range of wall mounted, concealed, digitally controlled thermostatic blending valve with a 1, 2 or 3 outlets, incorporating a plastic body, the flow and temperature is controlled via a digital user interface. Products incorporate a built-in pump and a solenoid valve. Maximum working pressure 1.0 Bar Maximum operating temperature 65.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250302013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm spigot connection
Marking:
Aqualisa logo, pressure, temperature and other technical information on adhesive label on body.
Installation Requirements:
R001 R040
Expiry date:
31/03/2029
Model:
705758 705759 705760 Models added July 2025 1013928 1013929 1001269 1001271 1001273

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#250302017

Wall mounted, bar type thermostatic blending valve, (brass bodies - various finishes), incorporating a half turn ceramic disc for manually diverting the flow between the shower handset, on off position, and the overhead shower with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a manual override button with a dome type operating member. The product is supplied with an overhead shower head, shower hose and handset. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainers. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250302017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M) x ½” BSP (M) offset unions
Marking:
Hansgrohe on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2030
Model:
27 633 xx0. Models added April 2025: 24592xx0, 24593xx0. Models added July 2025: 48 794 xx0 & 48 795 xx0. Model added September 2025: 24 594 xx0. Models added September 2025: 28 823 xx0 and 28 825 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval


#250304013

Range of wall mounted concealed thermostatic shower valves (brass bodies – various finishes) incorporating either quarter turn ceramic discs or ceramic disc diverters. Temperature is controlled independently via a thermostatic cartridge. Products incorporate approved check valve cartridges, however the complete product has not been fully tested to demonstrate backflow protection. Maximum working pressure: 5.0 bar Maximum operating temperature: 70°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250304013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
First Fix valves must be used incjoncution with the models listed in this approval. Products are not supplied with shower hoses, handsets, overhead showers or riser rail assemblies.
Size:
¾” BSP
Marking:
St James on faceplate
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
First Fix Valves Only TH.100.F.00 First Fix Valve, 1 outlet TH.101.F.00 First Fix Valve, 2 outlet TH.102.F.00 First Fix Valve, 3 outlet TH.104.F.00 First Fix Valve, 3 outlet First Fix, 1 Outlet, 2 Handle ET.100.C.XX EATON HT.100.C.XX HATTON DN.100.C.XX DENBIGH CV.100.C.XX CAVENDISH CW.100.C.XX CRANWORTH First Fix, 2 Outlet, 2 Handle ET.101.C.XX EATON HT.101.C.XX HATTON DN.101.C.XX DENBIGH CV.101.C.XX CAVENDISH First Fix, 3 Outlet, 2 Handle ET.102.C.XX EATON HT.102.C.XX HATTON DN.102.C.XX DENBIGH CV.102.C.XX CAVENDISH First Fix, 3 Outlet, 3 Handle ET.104.C.XX EATON “XX” denotes the finish of the trim kit Finish codes are - 01 = Chrome, 02 = Matt Black, 03 = Brushed Brass, 04 = Brushed Nickel, 05 = Brushed Bronze, 06 = Gunmetal, 07 = Polished Nickel, 08 = Stainless Steel

Approval Holder:
Sanbra Limited T/A St James England
Company Name
Sanbra Limited T/A St James England
Address
17 Flitch Industrial Estate Chelmsford Raod Dunmow
Postcode
CM6 1XJ
Country
GB
Phone
01213588946
General Email
wayne.berrow@StJamesEngland.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1303 of 1771

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.