Directory Search Results

Fittings Materials
Print List

#240502033

Range of ceramic disc headworks with brass bodies incorporating NBR O-rings. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 10 Bar Maximum operating temperature 85°C

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
240502033
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model
Marking:
PPI on body
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
VS01-XXXX – ½” BSP (M) VS02-XXXX – ½” BSP (M) VS03-XXXX – ¾” BSP (M) VS04-XXXX – ¾” BSP (M) VS05-XXXX – ½” BSP (M) VS06-XXXX – M18 (M) Where XXXX denotes the following: 1st X = Opening direction, ‘H’ for left open, ‘C’ for right open 2nd X = Spline count, ‘1’ for 20 splines, ‘2’ for 24 splines. 3rd & 4th X = Screw rod length, ‘10’ to ‘55’ for length in mm
Product Images
Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval

#240502053

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The products incorporate a pull-out spout with a plastic aerator. Both models incorporate an approved check valve cartridge within the quick connector to the pull-out hose, and the inlet to the pull-out spout of the 63036-01X model incorporates an approved check valve cartridge with a plastic flow regulator, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
240502053
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R007 applies to the connecting hose between the tap body and the pull-out hose.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Lota on front of body
Installation Requirements:
R001 R007 R009 R090
Expiry date:
31/05/2029
Model:
63036-01X, 63694-00X. Where X denotes the finish and can be replaced by any of the following: 0107 = Chrome, 04 = Brushed Nickel, 4408 = Brushed Brass, 7001 = Matt Black, 4403 = Brushed Brass (Light), 0402 = Brushed Nickel, 5804 = Gun Metal, 0408 = Brushed Stainless Steel.
Product Images
Approval Holder:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

Print This Approval

#240502020

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Model 33526626 is supplied with a lever type pop-up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240502020
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
No testing performed on pop up waste.
Size:
Stainless-steel braided PEX lined flexible hose assembly with ½” captive nut end connection.
Marking:
Dornbracht logo on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2029
Model:
Edition Pro - 33501626, Edition Pro - 33526626.
Product Images
Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval

#240502024

Range of single-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes) incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener. Model (V108-XX) is supplied with a lever operated pop-up waste. Maximum working pressure: 5.0 Bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240502024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
No testing performed on pop up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies, with ½” captive nut end connections.
Marking:
Samuel Heath on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2029
Model:
V108-XX V128-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Product Images
Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval

#240504009

Range of single hole, single outlet (fixed), combination tap assemblies incorporating, (chrome plated brass bodies),with single lever operating members. The spout outlet incorporates a plastic flow straightener. Some products are supplied with a lever operated pop-up waste (not verified by test). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240504009
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
Sanifirst etched on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2029
Model:
53CR2050HPB59 H100 - 74001 Pressure-balance basin mixer, Unika lever without waste 53CR2050HPB670 H100 - 74003 Pressure-balance basin mixer, Clinica lever without waste 53CR2110HPB59 H100 - 74000 Pressure-balance basin mixer, Unika lever with waste 53CR2110HPB670 H100 - 74002 Pressure-balance basin mixer, Clinica lever with waste
Product Images
Approval Holder:
Les Robinets Presto S.A
Company Name
Les Robinets Presto S.A
Address
4 Rue Lavoiser St. Georges De Didonne
Postcode
17110
Country
France
Phone
+33 546 053 452
General Email
l.granseigne@presto.fr

View All Listings by this Company
Manufacturer:
Paini S.p.A. Rubinetterie
Company Name
Paini S.p.A. Rubinetterie
Address
Via Cremosina 43 28076 Pogno (NO)
Country
Italy
Phone
+39 0322 9971
General Email

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 1273 of 2029

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.