Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled with a solenoid valve activated via touch operation. Temperature is controlled using a manual single lever operating member. The spout outlets incorporate plastic aerators. The inlets incorporate an approved check valve cartridge; however the complete assemblies have not been fully tested to demonstrate they provide backflow protection, and a stainless steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

240902027

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies with a 3/8" BSP captive nut end connector.

Marking:

Stern on body

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2029

Model:

Green Time 1000B AB1953 (two inlets, battery powered) Green Time 1000E AB1953 (two inlets, transformer powered) Green Time 1000 AB1953 (two inlets, transformer powered)

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company

BS1212-4 (2016) compact type float operated valve for WC flushing cisterns, side entry type. The inlet incorporates a plastic flow restrictor. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

2109073

Size:

½” BSP (M) 3/8” BSP (M)

Marking:

UNISANI, BS1212-4 & model on body

Installation Requirements:

R001 R550

Expiry date:

30/09/2026

Model:

BWA1200

Approval Holder:

UNISANI (XIAMEN) TECHNOLOGY CO., LTD

Company Name

UNISANI (XIAMEN) TECHNOLOGY CO., LTD

Address

Unit 1204, No.496, Xinglinwan Road, Jimei District, Xiamen

Country

China

View All Listings by this Company

Range of side and bottom entry BS1212-3 inlet valves, with plastic bodies and brass shanks. Maximum working pressure: 3.0 Bar low pressure and 14.0 bar high pressure Maximum operating temperature: Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

240702709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For use with a float complying with BS 2456, which is not part of this approval.

Size:

½” BSP (M)

Marking:

Flomasta and product code on side of valve. BS1212-3 on nut

Installation Requirements:

R001 R550 R560

Expiry date:

31/07/2029

Model:

C10100844 C10100846

Approval Holder:

Kingfisher International Products B.V

Company Name

Kingfisher International Products B.V

Address

Rapenburgerstraat 175E, 1011 VM Amsterdam

Country

Netherlands

View All Listings by this Company

Range of side and bottom entry BS1212-3 inlet valves, with plastic bodies and brass shanks. Maximum working pressure: 3.0 Bar low pressure and 14.0 bar high pressure Maximum operating temperature: Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

240702710

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For use with a float complying with BS 2456, which is not part of this approval.

Size:

½” BSP (M)

Marking:

Flomasta and product code on side of valve. BS1212-3 on nut

Installation Requirements:

R001 R550 R560

Expiry date:

31/07/2029

Model:

C10100844 C10100846

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of concealed WC flushing cisterns with a side entry BS 1212-4(2016) float operated inlet valve providing a type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two button assembly for a 6 or 3 litre flush volume. The cistern incorporates a servicing valve and a stainless-steel braided EPDM lined flexible hose assembly installed prior to the inlet valve. Maximum working pressure 10.0 Bar, Cold Water use only

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

2111070

Size:

1/2" BSP (M)

Marking:

UNISANI, model number and 6l mark inside cistern.

Installation Requirements:

R001 R556

Expiry date:

30/11/2026

Model:

BW336-F & BW336

Approval Holder:

UNISANI (XIAMEN) TECHNOLOGY CO., LTD

Company Name

UNISANI (XIAMEN) TECHNOLOGY CO., LTD

Address

Unit 1204, No.496, Xinglinwan Road, Jimei District, Xiamen

Country

China

View All Listings by this Company