Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250415018

‘CFxx and TFxx’ range of brass compression fittings for use with copper pipes and Irish copper pipe (both manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperatures: CF15 and CF16 models: 65°C. All other models: 85°C.

Section:: 1150 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, metal, for use with copper tube - above ground use only.
WRAS Approval Number:: 250415018
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: CF19, TF09 and CF26 models: Valtech on body. All other models: Valtech on compression nut.
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: CF01 - Straight Coupler CxC: ½", ¾", 1", 1¼", 1½", 2". CF03 - Straight Coupler CxC: ¾"*½", 1"*½", 1"*¾", 1¼"*¾", 1¼"*1", ½"*10mm, ½"*12mm, ½"*15mm, ¾"*22mm. CF01L - Repair Coupling CXC: ½"*½", ¾"*¾". CF07 - Straight Coupler M.I. X C: ½", ¾", 1", 1¼", 1½", 2", ½"*¾", ¾"*½", 1"*¾", ¾"*1", 1"*1¼", 1¼"*1", 1½"*1¼", 2"*1½". CF05 - Straight Coupler F.I. x C: ½", ¾", 1", 1¼", 1½", 2", ½"*¾", ¾"*½", 1"*¾", ¾"*1", 1¼"*1", 1“*1¼", 2“*1½". CF15 - Swivel Coupler F.I. x C: ½", ¾". CF02 - Elbow C x C: ½", ¾", 1", 1¼", 1½", 2", ¾"*½", 1"*¾", ½"*15mm, ¾"*22mm. CF08 - Elbow M.I. x C: ½", ¾", 1", 1¼", 1½", 2", ¾"*½", 1"*¾", ½"*¾", ¾"*1". CF06 - Elbow F.I. x C: ½", ¾", 1", 1¼", 1½", 2", ½"*¾", ¾"*½", ¾"*1", 1"*¾". CF10 - Wallplate Elbow F.I. x C: ½"*½", ¾"*¾", ½"*¾". CF11 - Equal Tees CxCxC: ½", ¾", 1", 1¼", 1½", 2". CF12 - Reducing Tee C x C x C: ½"*½"*¾", ¾"*¾"*½", ¾"*¾"*1", 1"*1"*½", 1"*1"*¾", 1¼"*1¼"*½", 1¼"*1¼"*¾", 1¼"*1¼"*1", 1½"*1½"*¾", 1½"*1½"*1", 1½"*1½"*1¼", ¾"*½"*¾", 1"*½"*1", 1"*½"*¾", 1"*¾"*1", ¾"*½"*½", 1"*¾"*¾", 1"*¾"*½", 1"*½"*½", 10mm*10mm*½", ½"*10mm*10mm, ½"*10mm*½", ½"*½"*10mm. CF24 - Cross CxCxCxC: ½", ¾", ¾"*½"*½"*½". CF16 - Swivel Elbow F.I. x C: ½", ¾". CF13 - Tee CxCxF.I.: ½", ¾", 1", ¾"*¾"*½", 1"*1"*½", 1"*1"*¾". CF19 - Reducing Set: ¾"*½", 1"*½", 1"*¾", 1¼"*½", 1¼"*¾", 1¼"*1", 1½"*½", 1½"*¾", 1½"*1", 1½"*1¼", 2"*½", 2"*¾", 2"*1", 2"*1¼", 2"*1½". CF17 - Flanged Tank Connector with Backnut: ½", ¾", 1", 1¼", 1½", 2". CF14 - Stop End: ½", ¾", 1", 1¼", 1½", 2". TF09 - Blank Cap and Washers: ½", ¾", 1", 1¼", 1½", 2". TF26 - Coupling Nut: ½", ¾", 1", 1¼", 1½", 2". CF26 - Compression Ring: ½", ¾", 1", 1¼", 1½", 2". Where M.I. = BSP (M) and F.I. = BSP (F).

Product Images

Approval Holder:: Ningbo Valtech Flow Control Co., Ltd

Company Name
Ningbo Valtech Flow Control Co., Ltd
Address
Room 610 New Oriental Times Building No. 1130 Biaizhang East Road Ningbo Zhejiang
Country
China
Phone
+86 0574 88001556

View All Listings by this Company
Manufacturer:: Ningbo Valtech Flow Control Co., Ltd

Company Name
Ningbo Valtech Flow Control Co., Ltd
Address
Room 610 New Oriental Times Building No. 1130 Biaizhang East Road Ningbo Zhejiang
Country
China
Phone
+86 0574 88001556

View All Listings by this Company

WRAS Approval Number: #250402030

‘Universal Transition Coupling (UTC)’ range of plastic compression fittings for use with the following pipe types and sizes: Stainless steel (manufactured to ASTM A554/ BS EN 10312): ¾”, 1” & 1¼”. Galvanised (EN 10255): ¾”, 1”, 1¼”, 1½” & 2”. Copper (BS EN 1057): 15mm, 22mm & 28mm. PVC (BS EN 1452): 20mm & 2”. ABS (BS 5391-1): 20mm, 25mm & 32mm. PE80 & PE100 pipe (to BS EN 12201): 20mm, 25mm, 32mm, 50mm & 63mm. For use above and below ground. Maximum working pressure 12.5 bar. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250402030
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: see model
Marking:: Philmac, Universal Transition Fitting, size & date of manufacture (M/YY) on body.
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: 87113300 UTC Joiner 15-21mm x 15-21mm 87114300 UTC Joiner 21-27mm x 15-21mm 87114400 UTC Joiner 21-27mm x 21-27mm 87115300 UTC Joiner 27-34mm x 15-21mm 87115400 UTC Joiner 27-34mm x 21-27mm 87115500 UTC Joiner 27-34mm x 27-34mm 87116500 UTC Joiner 39-43mm x 27-34mm 87116600 UTC Joiner 39-43mm x 39-43mm 87117700 UTC Joiner 34-39mm x 34-39mm 87118800 UTC Joiner 47-49mm x 47-49mm 87119900 UTC Joiner 59-61mm x 59-61mm 87123100 UTC End Connector MI BSP 15-21mm x ½" 87123200 UTC End Connector MI BSP 15-21mm x ¾" 87123300 UTC End Connector MI BSP 15-21mm x 1" 87124200 UTC End Connector MI BSP 21-27mm x ¾" 87124300 UTC End Connector MI BSP 21-27mm x 1" 87124400 UTC End Connector MI BSP 21-27mm x 1¼" 87125200 UTC End Connector MI BSP 27-34mm x ¾" 87125300 UTC End Connector MI BSP 27-34mm x 1" 87125400 UTC End Connector MI BSP 27-34mm x 1¼" 87125500 UTC End Connector MI BSP 27-34mm x 1½" 87133300 UTC Tee 15-21mm 88103200 UTC x 3G Metric/Imperial Joiner 15-21 x 20/½" 88103300 UTC x 3G Metric/Imperial Joiner 15-21 x 25/¾" 88104200 UTC x 3G Metric/Imperial Joiner 21-27 x 20/½" 88104300 UTC x 3G Metric/Imperial Joiner 21-27 x 25/¾" 88105200 UTC x 3G Metric/Imperial Joiner 27-34 x 20/½" 88105300 UTC x 3G Metric/Imperial Joiner 27-34 x 25/¾" 88105400 UTC x 3G Metric/Imperial Joiner 27-34 x 32/1" 88106400 UTC x 3G Metric/Imperial Joiner 39-43 x 32/1" 88107400 UTC x 3G Metric/Imperial Joiner 34-39 x 32/1" 88108600 UTC x 3G Metric/Imperial Joiner 47-49 x 50/1½" 88108700 UTC x 3G Metric/Imperial Joiner 47-49 x 63/2" 88109700 UTC x 3G Metric/Imperial Joiner 59-61 x 63/2" 88153300 UTC x 3G Metric/Imperial Elbow 15-21 x 25/¾" 88154300 UTC x 3G Metric/Imperial Elbow 21-27 x 25/¾" 88154400 UTC x 3G Metric/Imperial Elbow 21-27 x 32/1" 88155300 UTC x 3G Metric/Imperial Elbow 27-34 x 25/¾" 88165300 UTC x 3G Metric/Imperial Elbow 27-34 x 32/1"

Manufacturer:: Philmac Pty Ltd.

Company Name
Philmac Pty Ltd.
Address
47-59 Deeds Road, North Plympton, SA 5037
Country
Australia

View All Listings by this Company

WRAS Approval Number: #250804703

Range of brass press fittings for use with copper pipe (manufactured to EN1057:2006 and +A1:2010 Seamless round copper tube, R250 half hard). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250804703
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: Flowflex logo and size on body.
Installation Requirements:: R001
Expiry date:: 31/08/2030
Model:: 6090GM Female Elbow: 6090GM.15x½B. 6090GM.22x¾B. 6090GM.28x1B. 6092GM Male Elbow: 6092GM.15x½B. 6092GM.22x¾B. 6092GM.28x1B. 6130GM Female Tee: 6130GM.151215B. 6130GM.221222B. 6130GM.223422B. 6130GM.281228B. 6130GM.283428B. 6130GM.351235B. 6130GM.421242B. 6130GM.541254B 6240GM Swivel Connector: 6240GM.15x¾B. 6240GM.22x1B. 6240GM.28x l¼B. 6243GM Male Adaptor: 6243GM.15x½B. 6243GM.15x¾B. 6243GM.22x½B. 6243GM.22x1B. 6243GM.22x¾B 6243GM.28x1B 6243GM.28x¾B 6243GM.35x 1¼B. 6243GM.35x1B 6243GM.42x 1½B. 6243GM.54x2B. 6243GM.67x 2½B. 6243GM.76x3B. 6270GM Female Adaptor: 6270GM.15x½B. 6270GM.15x¾B. 6270GM.22x½B. 6270GM.22x1B. 6270GM.22x¾B. 6270GM.28x1B. 6270GM.28x¾B. 6270GM.35x 1¼B. 6270GM.35x1B. 6270GM.42x 1½B. 6270GM.54x2B 6341GM Male Union: 6341GM.15x½B. 6341GM.22x¾B. 6341GM.28x1B. 6472GM Wallplate Elbow: 6472GM.15x½B.

Approval Holder:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Country
United Kingdom
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

WRAS Approval Number: #250302053

Flomasta Range of plastic, push-fit fittings (wall plate elbow, equal elbow, end stop, pipe insert, equal straight and equal tee) for use with MDPE pipe (manufactured to BS EN 12201), for above and below ground use. Copper adaptors are for use with PB pipe (manufactured to BS7291-2), PEX pipe (manufactured to BS7291-3) or Copper pipes (manufactured to BS EN 1057) and are for above ground use only. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250302053
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to models
Marking:: TLC logo and size on body. Size and PN on plastic nut.
Installation Requirements:: R001
Expiry date:: 31/03/2030
Model:: Flomasta Range of plastic push-fit fittings SMDCA6726M - 20mm X 15mm. SMDCA6784M - 25mm X 22mm. SMDCA6786M - 25mm X 15mm. SMDE6722M, SMDST672M, SMTS20M, SMDU6722M & SMDT67222M - 20mm. SMDE6788M, SMDST678M, SMDU6788M, SMDT67888M & SMTS25M - 25mm. SMDWP6784M - 25mm x ½” BSP (M). SMDWP6724M - 20mm x ½” BSP (F) (Wall Plate Elbow).

Approval Holder:: Kingfisher Plc.

Company Name
Kingfisher Plc.
Address
1 Paddington Square, London
Postcode
W2 1GG

View All Listings by this Company
Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company
Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company

WRAS Approval Number: #250402057

Range of ultrasonic water meters with plastic bodies and plastic strainers at the inlets. Specific models (see models) incorporate an optional non return valve (not suitable for backflow protection). Maximum working pressure 16.0 Bar. Maximum operating temperature 90°C.

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN15 = ¾” BSP (M) DN20 = 1” BSP (M) DN25 = 1.1/4” BSP (M) DN32 = 1.1/2” BSP (M) DN40 = 2” BSP (M) DN50 = DN50 Flanged
Marking:: Axioma logo and technical information on meter face. Flow arrow on body.
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: Models with optional non return valve: QALCOSONIC W1 DN15 - L105, L110, L165, L170 QALCOSONIC W1 DN20 - L130, L165, L190 QALCOSONIC W1 DN15 B Design - L110, L165, L170 QALCOSONIC W1 DN20 B Design - L130, L165, L190 QALCOSONIC W1 DN25 - L260 Models without optional non return valve QALCOSONIC W1 DN15 - L80 QALCOSONIC W1 DN20 - L105, L110 QALCOSONIC W1 DN20 B Design - L105 QALCOSONIC W1 DN32 - L260 QALCOSONIC W1 DN40 - L300 QALCOSONIC W1 DN50 - L200

Manufacturer:: Axioma Metering UAB

Company Name
Axioma Metering UAB
Address
Veterinar? g. 52, LT-54469 Biruliški? k., , Kauno r. sav.
Country
Lithuania
Phone
+370 37 360 234

View All Listings by this Company