Unidelta range of compression fittings with polypropylene bodies with EPDM ‘O’ rings for use with PE100 polyethylene pipe (manufactured to EN12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2111701

Note:

For above and below ground use

Size:

20mm, 25mm, 32mm, 40mm, 50mm, 63mm

Marking:

Unidelta, pressure rating & size on the compression nut

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

Straight coupler (1001) Reducing coupler (1002) Male adapter (1003) Female adapter (1004) 90° Tee (1005) 90° Elbow (1006) 90° Tee with female threaded take off (1007) 90° Elbow with threaded male take off (1008) 90° Elbow with threaded female take off (1009) 90° Tee with threaded male take off (1010) End plug (1012) 90° reducing tee (1013) Repair slip coupler (1014) Female tee with peg fitting (1012) 90° Elbow with lateral thread take off (1023) 90° Tee with increased take off (1029) Wall plate elbow (1034)

Approval Holder:

Unidelta SpA

Company Name

Unidelta SpA

Address

Via Capparola Sotto 4, 25078 Vestone (Brescia)

Country

Italy

View All Listings by this Company

Manufacturer:

Unidelta SpA

Company Name

Unidelta SpA

Address

Via Capparola Sotto 4, 25078 Vestone (Brescia)

Country

Italy

View All Listings by this Company

Range of copper end feed fittings for use with copper tube. For above and below ground use. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101807

Size:

SEE MODEL

Marking:

Hastings Copper Industries (Brand of Metalica SA) double triangle logo & size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Hastings Copper Socket: (HEFC-15, 15mm; HEFC-L-15, 15mm; HEFC-22, 22mm; HEFC-L-22, 22mm; HEFC-L-28 28mm; HEFC-28, 28mm; HEFC-35, 35mm; HEFC-42,42mm; HEFC-54, 54mm;) Hastings Copper Bend 90o MF: HEFESL-12:12mm. HEFESL-15:15mm. HEFESL-18:18mm. HEFESL-22:22mm. HEFESL-28:28mm. HEFESL-35:35mm. HEFESL-42:42mm. HEFESL-54:54mm Hastings Copper Elbow FF: HEFE-15, 15mm; HEFE-L-15, 15mm; HEFE-22, 22mm;HEFE-L-22, 22mm; HEFE-28, 28mm; HEFE-L-28, 28mm;HEFE-35,35mm;HEFE-42, 42mm; HEFE-54,54mm; Hastings Copper 45° Elbow FF:HEFE/45-15, 15mm; HEFE/45-22,22mm; HEFE/45-28, 28mm;HEFE/45-35, 35mm; HEFE/45-42, 42mm; HEFE/45-54, 54mm; Hastings Copper 90 Elbow MF:HEFES-15, 15mm;HEFES-L-15, 15mm;HEFES-22, 22mm;HEFES-L-22, 22mm;HEFES-28, 28mm; HEFES-L-28, 28mm;HEFES-35, 35mm; HEFES-42, 42mm; HEFES-54,54mm; Hastings Copper 45° Elbow MF:HEFES/45-15, 15mm; HEFES/45-22,22mm; HEFES/45-28, 28mm;HEFES/45-35, 35mm; HEFES/45-42, 42mm;HEFES/45-54, 54mm) Hastings Copper Tee:HEFET-15, 15mm; HEFET-L-15, 15mm; HEFET-22,22mm; HEFET-L-22, 22mm;HEFET-28, 28mm; HEFET-L-28, 28mm; HEFET-35,35mm; HEFET-42, 42mm; HEFET-54, 54mm; Hastings Copper Reducing Tee;HEFRT-151015;15x10x15mm; HEFRT-151508, 15x15x8mm; HEFRT-151510,15x15x10mm; HEFRT-151512, 15x15x12mm; HEFRT-151522, 15x15x22mm; HEFRT-221515, 22x15x15mm;HEFRT-221522, 22x15x22mm; HEFRT-L-221522, 22x15x22mm; HEFRT-222210, 22x22x10mm; HEFRT-222215, 22x22x15mm; HEFRT-L-222215,22x22x15mm; HEFRT-222228, 22x22x28mm; HEFRT-281515, 28x15x15mm;HEFRT-281522, 28x15x22mm; HEFRT-281528, 28x15x28mm; HEFRT-282215,28x22x15mm; HEFRT-282222, 28x22x22mm; HEFRT-282228, 28x22x28mm;HEFRT-282815, 28x28x15mm; HEFRT-282822, 28x28x22mm; HEFRT-282835,28x28x35mm; HEFRT-352222, 35x22x22mm; HEFRT-352235, 35x22x35mm;HEFRT-352822, 35x28x22mm; HEFRT-352828,35x28x28mm; HEFRT-352835,35x28x35mm; HEFRT-353515, 35x35x15mm; HEFRT-353522, 35x35x22mm;HEFRT-353528, 35x35x28mm; HEFRT-422828, 42x28x28mm; HEFRT-422842,42x28x42mm; HEFRT-423535, 42x35x35mm; HEFRT-423542, 42x35x42mm;HEFRT-424215, 42x42x15mm; HEFRT-424222, 42x42x22mm; HEFRT-424228,42x42x28mm; HEFRT-424235, 42x42x35mm; HEFRT-544254, 54x42x54mm;HEFRT-545415, 54x54x15mm; HEFRT-545422, 54x54x22mm; HEFRT-545428,54x54x28mm; HEFRT-545435, 54x54x35mm; HEFRT-545442, 54x54x42mm; Hastings Copper Plug:HEFEC-15, 15mm; HEFEC-L-15, 15mm; HEFEC-22,22mm; HEFEC-L-22, 22mm; HEFEC-28, 28mm; HEFEC-35, 35mm; HEFEC-42,42mm;HEFEC-54, 54mm; Hastings Copper Reducer CXFTG:HEFFR-1510, 15x10mm;HEFFR-L-1510, 15x10mm;HEFFR-1512, 15x12mm; HEFFR-2215, 22x15mm; HEFFR-L-2215, 22x15mm;HEFFR-2815,28x15mm; HEFFR-2822,28x22mm; HEFFR-L-2822, 28x22mm; HEFFR-3515,35x15mm; HEFFR-3522, 35x22mm; HEFFR-3528,,35x28mm; HEFFR-4215,42x15mm; HEFFR-4222, 42x22mm; HEFFR-4228, 42x28mm; HEFFR-4235,42x35mm; HEFFR-5415, 54x15mm; HEFFR-5422, 54x22mm;HEFFR-5428,54x28mm; HEFFR-5435,,54x35mm; HEFFR-5442, 54x42mm; Hastings Copper Bend 90o MF: HEFE-L-12:12mm.HEFE-L-15:15mm.HEFE-L-18:18mm.HEFE-L-22:22mm.HEFE-L-28:28mm.HEFE-L-35:35mm.HEFE-L-42:42mm.HEFE-L-54:54mm.

Product Images

Approval Holder:

Metalica SA

Company Name

Metalica SA

View All Listings by this Company

Range of single and dual flush WC outlet valves with ABS body and EPDM seating washers. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2106317

Size:

2” BSP (M)

Marking:

Geberit & Type printed on body.

Installation Requirements:

R001 R571

Expiry date:

30/06/2026

Model:

Geberit Type 290

Product Images

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Range of dual flushing WC outletvalves with plastic bodies and silicone gasket. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2107316

Size:

58.39mm OD

Marking:

Vitra, NF, KIWA,date of manufacture clock (month/year) on body.

Installation Requirements:

R001 R571

Expiry date:

31/07/2026

Model:

437308 437309

Product Images

Approval Holder:

Eczacibasi Building Materials Vitra Faucet Division

Company Name

Eczacibasi Building Materials Vitra Faucet Division

Address

4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik

Country

Turkey

Phone

+90 228 314 07 90

View All Listings by this Company

Manufacturer:

Eczacibasi Building Materials Vitra Faucet Division

Company Name

Eczacibasi Building Materials Vitra Faucet Division

Address

4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik

Country

Turkey

Phone

+90 228 314 07 90

View All Listings by this Company

Range of WC dual flush drop valves comprising of a plastic body, silicone seal and an internal overflow. The valve is operated via a push button or lever assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2107105

Note:

Open outlet use only.

Size:

2” BSP (M)

Marking:

Kohler and model number on valve body

Installation Requirements:

R001 R571

Expiry date:

31/07/2026

Model:

1190056 dual flush valve with any of the following actuators: 1278504-XX, 1367704-XX, 1215521-XX or 1199720-XX. 1409397 dual flush valve with 1409402-XX actuator. XX denotes the finish on the actuator, e.g. CP (chrome plating).

Product Images

Approval Holder:

Kohler (Thailand) Public Company Limited

Company Name

Kohler (Thailand) Public Company Limited

Address

16TH FLOOR JASMINE CITY BUILDING 2 SOI SUKHUMVIT 23.

View All Listings by this Company

Manufacturer:

Xiamen R&T Plumbing Technology Co.,Ltd

Company Name

Xiamen R&T Plumbing Technology Co.,Ltd

Address

No.18, Houxiang Road Haicang District Xiamen

Postcode

361022

Country

China

Phone

86-0592-3959422

View All Listings by this Company