Range of cold water supply booster sets, consisting of between 2 & 4 pumps, modular stainless steel manifold system, servicing valve, non-return valve (not suitable for backflow protection) and an expansion vessel. Maximum working pressure 10.0 bar or 16.0 bar (identified on adhesive label on expansion vessel) Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2304317

Size:

DN50 to DN150

Marking:

Dutypoint Ltd. model, serial number and other technical information on adhesive label on base.

Installation Requirements:

R001 R415

Expiry date:

30/04/2028

Model:

VT2-05-xxxx VT2-10-xxxx VT2-15-xxxx VT2-20-xxxx VT3-05-xxxx VT4-05-xxxx VT3-10-xxxx VT3-15-xxxx VT3-20-xxxx VT4-10-xxxx VT4-15-xxxx VT4-20-xxxx Example of model: VT2-05-015T xxxx on end of model codes above denotes all motor size and type. Range: VT. Number of Pumps: 2. Nominal flow rate: (m³/hr) 05. Motor kW: (without decimal)15 (1.5kw). Voltage: (T=400/3/50 M=230/1/50) T

Product Images

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Manufacturer:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Range of circulator pumps with brass bodies, plastic impellor, and EPDM ‘O’-rings and seals. The COMFORT 15-14 BX prefix models incorporate a screwdriver operated isolation valve on the inlet and a non-return valve at the outlet. These are housed within 1” BSP (M) x ½” BSP (M) adaptors. Maximum working pressure 10.0 Bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2304909

Size:

COMFORT 15-14 B prefix models: ½” BSP (F). COMFORT 15-14 BX prefix models: 1” BSP (M).

Marking:

Grundfos on body. Model on adhesive label on body. Flow arrow on the isolation valve.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

COMFORT 15-14 B PM GB, COMFORT 15-14 BX PM GB, COMFORT 15-14 BDT PM GB, COMFORT 15-14 BXDT PM GB, COMFORT 15-14 BA PM GB, COMFORT 15-14 BXA PM GB. Models added October 2024: COMFORT 15-14 B T GB, COMFORT 15-14 B GB, COMFORT 15-14 BX T GB, COMFORT 15-14 BX GB, COMFORT 15-14 B TDT GB, COMFORT 15-14 BX TDT GB, COMFORT 15-14 B TA GB, COMFORT 15-14 BX TA GB. Model keycode: Pump type: COMFORT, 15: Length 80mm, 14: Maximum head [14 dm], B: Brass pump, X: Fittings included (see product description), Blank = No fittings, Control mode, 1-4 characters. Blank: Basic (always on), T: Thermostat, DT: Digital timer, A: AutoAdapt. PM: Permanent magnet (Designation removed October 2024). GB: Sales region.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of multistage pumps (VL and CL series) and submersible pumps (VN, CN, ES and CS series) with stainless steel bodies and impellers and NBR gaskets and ‘O’-rings. Maximum working pressure 15.0 bar (VL and CL series pumps only).

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2303041

Size:

VL and CL series: 1 ¼” Female BSP inlet x 1 ½” Female BSP outlet. VN and CN series: 1 ¼” Female BSP outlet - 2" Female BSP outlet. ES and CS series: 1 ¼” Female BSP outlet.

Marking:

Franklin electric Srl logo, WRAS, model no., serial no., pressure and date of manufacture (DD/MM/YYY) on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2028

Model:

VNx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CN/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, VLx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CL/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, ESx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CS/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D. Where: VN, CN, VL, CL, ES, CS = Series name. VN/VL/ES series “E-TECH” brand CN/CL/CS Series “FPS” brand x1 = Nominal Flow: 3, 5, or 9. (9 is not available on ES and CS models) xx2 = number of impellers: 2 to 10 (VN/CN & VL/CL models), 2 to 8 (ES/CS models), depending on Nominal Flow and Frequency. I = Material: St/Steel 1.4301 (AISI304). xxx3 = Motor Power (kW x 10): 005, 007, 009, 011… x4 = Supply (no phase): T (three phase), M (single phase). x5 = Frequency (Hz): 5 (50 Hz), or 6 (60 Hz). x6 = Motor Configuration: L (Bi-phase, 90° single-phase), D (Three-phase, triangle), or Y (Three-phase, star). N = Mechanical seal elastomer: N = NBR. x7 = Mechanical Seal surface: 1 (Graphite / Silicon Carbide), or 2 (Silicon Carbide). x8 = Float Switch: 0 (without). B = Cable type: B (Blue). x9 = Cable size: A (4G1), B (4G1.5), C (3G1), or D (3G1.5). x10 = Cable length: O: 20m - VN/CN and ES/CS models, E: 5m - VL/CS models. x11 = Control Panel (not in contact with liquid): 0 (without), or 1 (connected - VN/CN models only). N = Nude terminal (not in contact with liquid). x12 = Option (only on VN/CN models) - Discharge head (”): Empty (1¼” Nickel plated brass), I (1¼” inox), or J (2” inox). D = Drinking water approved.

Product Images

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Range of stainless-steel interlocked shower hoses and handsets (chrome plated plastic). Model 27803845 is supplied with a wall elbow (chrome plated brass body) and incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Shower hand set incorporates an approved shower handset, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2304001

Size:

See models.

Marking:

27803845 – Dornbracht on elbow body, Dornbracht on handset, 27805625 – Dornbracht on handset, 27805626 – Dornbracht on handset.

Installation Requirements:

R001 R040

Expiry date:

30/04/2028

Model:

27803845 – ½” BSP male, 27805625 – 3/8” BSP male, 27805626 – 3/8” BSP male.

Product Images

Approval Holder:

Dornbracht AG & Co. KG

Company Name

Dornbracht AG & Co. KG

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Shower handset incorporating a plastic body. The inlet incorporates a plastic flow reducer & stainless-steel strainer.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2304003

Size:

M15

Marking:

gjosa on body

Installation Requirements:

R001 R040

Expiry date:

30/04/2028

Model:

E3862800

Product Images

Approval Holder:

Gjosa

Company Name

Gjosa

Address

La Haute Route 78 2502 Bienne, Switzerland

View All Listings by this Company