Range of WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

251202726

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

BAGBODESIGN & model inside cistern, 6 litre line inside cistern.

Installation Requirements:

R001 R556

Expiry date:

31/12/2030

Model:

BAGNODESIGN BDS-K133-A01-ESG6

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

Country

United Kingdom

General Email

dan@sanipexgroup.com

View All Listings by this Company

Range of WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

260102705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Bagnodesign and model inside cistern, 6 litre line inside cistern.

Installation Requirements:

R001 R556 R571

Expiry date:

31/01/2031

Model:

BAGNODESIGN BDS-K301-A01-ESG6 & BDS-K301-D01-ESG4

BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

260101705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP Male or 15mm Push-fit Inlet connection.

Marking:

Splash cover marked Dudley. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.

Installation Requirements:

R001 R280

Expiry date:

31/01/2031

Model:

Element Cistern

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Concealed WC flushing cisterns and pan, incorporating a compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3.5 litres. The cistern is operated by either an IR sensor or a piezo button. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 Bar Cold water use only.

Section:

2041 WC suites

Section Subtitle:

Low level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.

WRAS Approval Number:

251202727

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Wallgate and model on control box. 6 litre line inside cistern

Installation Requirements:

R001 R559

Expiry date:

31/12/2030

Model:

CIST19-OPC: CIST19-OPC is used with Wallgate CWC Series 250 & 150 range of WC pans as follows: CWC-250, CWC-251, CWC-255, CWC-256, CWC-270-L, CWC- 270-R, CWC-280, CWC-281.

Approval Holder:

Wallgate Ltd.

Company Name

Wallgate Ltd.

Address

Crow Lane, Salisbury

Postcode

SP2 0HB

Country

United Kingdom

Phone

01722 702058

General Email

jmarshall@wallgate.com

View All Listings by this Company

Range of combined bath fillers and overflow waste assemblies with plastic bodies (various finishes). The outlet incorporates a plastic aerator. The products are supplied with a cable operated pop-up waste. Maximum operating temperature 60°C.

Section:

0690 Combination Tap Assemblies

Section Subtitle:

Combined bath filler and overflow(s).

WRAS Approval Number:

251002038

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM lined flexible hose assembly with a ½” BSP (F) captive nut end connection.

Marking:

Graff logo on waste operating member

Installation Requirements:

R001 R576

Expiry date:

31/10/2030

Model:

E-9997-** Model code: **: identifies the type of external finish, and can be replaced with any of the following: PC, BNi, PN, WT, BK, MBK, SN, OB, VBB, PB, BB, PG, BG, SG, PNP, BNP, OX, BOX, WB, RG, BRG, PRB, BRB, GM, AU, BAU

Approval Holder:

Graff Faucets Co.

Company Name

Graff Faucets Co.

Address

3701 W. Burnham St. Milwaukee, WI 5315

Country

USA

Phone

+1 414.649.9850

General Email

techsupport@graff-faucets.com

View All Listings by this Company

Section:

1670 Shower Outlets

Description:

A Range of Shower kit(s)

Wall mounted.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/12/2030

Approval Holder:

ZHEJIANG ZHONG RUI YI SHENG TRADING CO., LTD

Company Name

ZHEJIANG ZHONG RUI YI SHENG TRADING CO., LTD

Address

Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave Jiaojiang District, Taizhou City Zhejiang Province

Postcode

318000

Country

CHINA

Phone

+86-576-88675561

General Email

weijoy@weijoy.cn

View All Listings by this Company

Manufacturers:

ZHEJIANG ZHONG RUI YI SHENG TRADING CO. LTD

Section:

1670 Shower Outlets

Description:

A Range of Shower kit(s)

Wall Mounted Some models incorporate wall outlets - See manufacturer’s instructions for model-specific details.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/01/2031

Approval Holder:

Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd

Company Name

Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd

Address

Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company

Manufacturers:

ZHEJIANG ZHONG RUI YI SHENG TRADING CO. LTD

Section:

1670 Shower Outlets

Description:

A Range of Shower kit(s)

Shower hose EPDM Liner and stainless steel outer finish. All shower handsets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Wall outlets on models JD 744 and JD 795 incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/01/2031

Notes & Further Information

The first * stands for the different handle A, B,C and D, if there is no handle, no first * ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:

Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name

Guangzhou KIND Architecture Material Technology Co., Ltd.

Address

Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province

Postcode

510700

Country

China

Phone

+86-20-23371404

General Email

sale@watersino.com

View All Listings by this Company

Section:

2011 Shower Valves

Description:

A Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.

Wall Mounted Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/12/2030

Notes & Further Information

Where * denotes the finish color, and can be replaced with the following: CHR = Chrome BLK = Matte Black The inlets incorporate stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Approval Holder:

KYLIN Sanitary Technology (Xiamen) Co., Ltd

Company Name

KYLIN Sanitary Technology (Xiamen) Co., Ltd

Address

No.878, Tongfu Road, Tong’an District, Xiamen City, Fujian Province

Postcode

361100

Country

China

Phone

+86 159 8082 4540

General Email

961459820@qq.com

View All Listings by this Company

Manufacturers:

KYLIN Sanitary Technology (Xiamen) Co., Ltd

All pressure, single fixed, dual fixed and variable flow rate ranges of constant flow regulators. Maximum operating temperature 65°C.

Section:

0435 Taps and shower valves - Components

Section Subtitle:

Aerators, Flow Straighteners, Flow Regulators and Restrictors.

WRAS Approval Number:

260188008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only. Claims for flow rate, accuracy & working pressure by are made by the manufacturer and not considered part of the listing.

Size:

Up to 24mm

Marking:

Some models have ‘NP’ on body & some models have no identification marking due to size.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

AB.CDEF.GHIJK: MR01, MR03, MR04, MR05, MR06, SHS, SHL-C, SH-DW, SH-E, SH-F, SH-G, A, D, E, F, G, H, L, CART, CARTRIDGE, PCW-01, PCW-02, MULTI, 58.5721.0 (UDC ll), N, N-CART. AB – Denotes the generic part CDEF – Manufacuring sequential number GHIJK – Denotes the packaging variation

Approval Holder:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

Manufacturer:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company