Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2007056

Range of single and twin ended shower booster pumps with plastic bodies and plastic impellers. The inlets/outlets incorporate stainless steel braided EPDM lined flexible hose assemblies with isolation valves and stainless steel strainers. The outlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The Universal Twin models incorporate an expansion vessel. Maximum working pressure (See model). Maximum operating temperature 60°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2007056
Size:: 15mm push fit: CT50+XTRA, CT50XTRA, CT54XTRA, CT55+XTRA, CT55XTRA, CT59XTRA, CT75+XTRA, CT75XTRA, CT79XTRA, CT85+XTRA, CT85XTRA, CT89XTRA, CT60B, CT60BU, CT64HUXTRA, CT64HXTRA 21mm push fit: CTFORCE30IPS, CTFORCE30IPT, CTFORCE30ISU, CTFORCE30ITU, CTFORCE15IPT, CTFORCE15ITU, CTFORCE20IPS, CTFORCE20IPT, CTFORCE20ISU, CTFORCE20ITU, CT84HUXTRA, CT84HXTRA 22mm push fit: CTFORCE30PS, CTFORCE30PT, CTFORCE30SU, CTFORCE30TU, ACTFORCE30SU, ACCUFORCE, CTFORCE15PT, CTFORCE15TU, CTFORCE20PT, CTFORCE20PS, CTFORCE20SU, CTFORCE20TU, CT80B, CT80BU
Marking:: Salamander logo (graphical image of a Salamander) at each end of the pump housing. Salamander ID badge at the edge of the junction box. Pump ratings label sticker on top of junction box. Motor ratings label sticker on motor body.
Installation Requirements:: R001 R150 R415
Expiry date:: 31/07/2025
Model:: CT50+XTRA, CT50XTRA, CT54XTRA, CT55+XTRA, CT55XTRA, CT59XTRA, CT75+XTRA, CT75XTRA, CT79XTRA, CT85+XTRA, CT85XTRA, CT89XTRA, CT60B, CT60BU, CT64HUXTRA, CT64HXTRA, CT80B, CT80BU, CT84HUXTRA, CT84HXTRA, CTFORCE15IPT, CTFORCE15ITU, CTFORCE15PT, CTFORCE15TU, CTFORCE20IPS, CTFORCE20IPT, CTFORCE20ISU, CTFORCE20ITU, CTFORCE20PT, CTFORCE20PS, CTFORCE20SU, CTFORCE20TU, CTFORCE30IPS, CTFORCE30IPT, CTFORCE30ISU, CTFORCE30ITU, CTFORCE30PS, CTFORCE30PT, CTFORCE30SU, CTFORCE30TU, ACTFORCE30SU, ACCUFORCE. Key: XTRA = Plastic Ended, B = Plastic Ended with Plastic Bypass, H = Plastic Ended with Plastic Bypass (Ireland) FORCE = Brass Ended, A = Manufactured for a separate company, ACCU = Accumulator pump, U = Includes expansion vessel, P = No expansion vessel, T= Twin ended pump, S = Single ended pump, I = sold in Ireland, + = supplied with couplers with isolating valves, The XTRA models without a + come with couplers without isolating valves. The rest of the product ranges include isolating valves as standard. Pressures: 50/54/55/59/15 = 1.5 Bar, 60/64 = 1.8 Bar, 75/79/20 = 2.0 Bar, 85/89 = 2.5 Bar, 80/84 = 2.6 Bar, 30 = 3.0 Bar, ACCUFORCE = 4.0 Bar.

Product Images

Approval Holder:: Salamander Pumps

Company Name
Salamander Pumps
Postcode
SR5 3XE
Country
United Kingdom
Phone
0191 535 4528
General Email
lewisw@salamanderpumps.co.uk

View All Listings by this Company
Manufacturer:: Salamander Pumps

Company Name
Salamander Pumps
Postcode
SR5 3XE
Country
United Kingdom
Phone
0191 535 4528
General Email
lewisw@salamanderpumps.co.uk

View All Listings by this Company

WRAS Approval Number: #2007386

Range of shower booster pumps (either single or double) with acetal bodies and impellers and EPDM seals and NBR `O`-rings. Supplied with stainless-steel braided EPDM lined flexible hoses incorporating isolation valves Maximum working pressure 3.0 bar. Maximum operating temperature 65°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2007386
Size:: ½” BSP (F)
Marking:: Bristan, model, and other technical information on adhesive label on body
Installation Requirements:: R001 R415
Expiry date:: 31/07/2025
Model:: 1.5 bar Twin: 44435/ ST PUMP15TN 2.0 bar Twin: 44436/ ST PUMP20TN 2.0 bar Single: 44437/ ST PUMP20SG

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #2011073

Range of central heating pumps incorporating polyether sulphone impellers, copper-tin alloy body, carbon graphite axial bearings and EPDM O-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2011073
Size:: DN32, DN40, DN50, DN65
Marking:: DAB PUMP S.p.A, model number, date of manufacture and other technical info on adhesive label on body
Installation Requirements:: R001 R415
Expiry date:: 30/11/2025
Model:: EVOPLUS B XXX/YYY.ZZ SAN M Where: XXX = Hmax (m); either 40, 60, 80, 100, 120, 150, or 180. YYY = (Centre distance); either 220, 250, 280, or 340. ZZ = Size of flange connection (DN); either 32, 40, 50, or 65. EVOPLUS B 120/220.32 SAN M EVOPLUS B 120/250.40 SAN M EVOPLUS B 150/250.40 SAN M EVOPLUS B 180/250.40 SAN M EVOPLUS B 100/280.50 SAN M EVOPLUS B 120/280.50 SAN M EVOPLUS B 150/280.50 SAN M EVOPLUS B 180/280.50 SAN M EVOPLUS B 40/340.65 SAN M EVOPLUS B 60/340.65 SAN M EVOPLUS B 80/340.65 SAN M EVOPLUS B 100/340.65 SAN M EVOPLUS B 120/340.65 SAN M EVOPLUS B 150/340.65 SAN M

Product Images

Approval Holder:: DAB PUMPS SPA

Company Name
DAB PUMPS SPA
Address
Via Marco Polo 14 Mestrino (PD)
Postcode
35035
Country
Italy
General Email
certifications@dwtgroup.com

View All Listings by this Company
Manufacturer:: DAB PUMPS SPA

Company Name
DAB PUMPS SPA
Address
Via Marco Polo 14 Mestrino (PD)
Postcode
35035
Country
Italy
General Email
certifications@dwtgroup.com

View All Listings by this Company

WRAS Approval Number: #2011907

CM(E)(C) range of electronically operated pumps available in stainless steel, (‘EN 1.4301/AISI304’ or ‘EN 1.4401 /AISI316’) and cast iron. (CMEC models were added October 2023). The pumps are supplied with Sic-Sic mechanical shaft seals and FKM or EPDM seals. Cast iron models: Maximum working pressure 10.0 bar. Cold water use only. Stainless steel models: Maximum working pressure 16.0 bar. Maximum operating temperature 60°C for self-priming models, 99°C for all other models.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2011907
Size:: 1” - 2” BSP (F) or NPT inlet and outlet.
Marking:: Grundfos and Grundfos logo, type, model and technical information on adhesive label either on the terminal box or fan cover.
Installation Requirements:: R001 R415
Expiry date:: 30/11/2025
Model:: CM(E)(C)1, CM(E)(C)3 and CM(E)(C)5: CM(E)(C)1, cast iron / AISI304 2 – 8 stages. CM(E)(C)3, cast iron / AISI304 2 – 8 stages. CM(E)(C)5, cast iron / AISI304 2 – 8 stages. CM(E)(C)1, AISI316 2 - 14 stages. CM(E)(C)3, AISI316 2 - 14 stages. CM(E)(C)5, AISI316 2 - 13 stages. CM(E)(C)10 CM(E)(C)15 and CM(E)(C)25: CM(E)(C)10, cast iron / AISI304 1 – 5 stages. CM(E)(C)15, cast iron / AISI304 1 – 4 stages. CM(E)(C)25, cast iron / AISI304 1 – 4 stages. CM(E)(C)10, AISI316 1 – 8 stages. CM(E)(C)15, AISI316 1 – 4 stages. CM(E)(C)25, AISI316 1 – 4 stages. Self-priming models: CM(E)1, AISI316 3 – 6 stages (S or O) CM(E)3, AISI316 3 – 6 stages (S or O) CM(E)5, AISI316 3 – 7 stages (S or O) Model key: CM/CME/CMEC X1-X2 X3 X4-X5-X6-X7-X8 X9 X10 X11 X11-X12-X13-X14 Where: CM = Centrifugal Modular. CME = Centrifugal Modular with integrated frequency converter. CMEC = Centrifugal Modular with integrated frequency converter and only core functions of the motor unit. (NOTE: CMEC models were added October 2023). X1 = Rated flow rate at 50 Hz (m³/h): 1-25. X2 = Number of impellers: 1-14. X3 = Pump Versions: A - Basic Version. E: Pumps with certificates/approvals. O: Self-priming version (maximum suction lift 8 metres). S: Self-priming version (maximum suction lift 4 metres). X4 = Pipe connection: R: Rp (ISO 7/1). S: Internal Npt thread. X5 = Material in contact with pump media: A: inlets and outlets parts EN-GJL-200, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. G: Sleeve, Pump shaft + Impellers and chambers EN 1.4401/AISI 316. I: Sleeve, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. X6 = Rubber parts in pump (excluding neck ring and shaft seal): E: EPDM. V: FKM. X7 = Shaft seal: A: O-ring seal with fixed driver. X8 = Material of rotating seal face: Q: Silicon Carbide (SIC). X9 = Material of stationary seal face: Q: Silicon Carbide (SIC). X10 =Material of secondary seal: E: EPDM. V: FKM. X11 = Supply voltage: B/B1/C/D/E/E1/F/G/H/I/J/O/S/T/U/V/X. X12 = Motor information: A/B/C/D/EF/G/H/I/J. X13 = Mains plug: A/B/C/D. X14 = Sensor: N: No sensor. Example: CM 10-3 A-R-I-E-A Q Q E C-A-A-N

Product Images

Approval Holder:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

WRAS Approval Number: #2106803

Range of inline circulating pumps with bronze bodies, plastic impeller and EPDM rubber seals. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2106803
Size:: Please refer to model.
Marking:: WILO, PN, flow arrow, serial number, date of manufacture (YYWW) and other technical information on body.
Installation Requirements:: R001
Expiry date:: 30/06/2026
Model:: STAR-Z 20/1 - 1” BSP (M). STAR-Z 25/2 - 1½” BSP (M). STAR-Z 20/2-3(15-130) - 1” BSP (M). STAR-Z 20/4-3(150) - 1¼” BSP (M). STAR-Z 20/5-3(150) - 1¼” BSP (M). STAR-Z 25/6 - 1½” BSP (M). STAR-Z 20/7-3(150) - 1¼” BSP (M). STAR-ZD 25/6 - 1½” BSP (M).

Approval Holder:: Wilo

Company Name
Wilo
Address
80 BD de I'industrie, BP0527 - 53005 Laval, Cedex
Country
France

View All Listings by this Company