Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #241102725

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 2.0 bar (MS(s) models), 4.0 bar (AM(E) models) Maximum operating temperature 85°C

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241102725
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: TERAL, model, size & technical information on date label on body. Flow arrow on cover.
Installation Requirements:: R001 R415
Expiry date:: 30/11/2029
Model:: MS(m)XXX-XX-E 1.m: different phase. --m: single phase, none: three phases 2.XXX: Rated flow (L/min) 3.XX: Rated power(kW). 4.E: E type end connection mode and size -- Rated flow(70-120m3/h): G1¼"XG1" -- Rated flow(210m3/h): G1½"XG1¼" -- Rated flow (370 m3/h): G2"XG1¼ AM(E) XXxXX (B) X/X-X XX(S) 1. E: Intelligent Type 2. XX: Inlet diameter (mm), range: 25,32,40,50 mm. 3. XX: Outlet diameter (mm), range: 25,32,40,50 mm. 4. B: alternative pump group 4. X/X: number of impeller /number of smaller impeller (if any) 5. X: motor frequency 6. XX: Rated power(kW) 7. S: different phase (S: single phase, none: three phases.)

Manufacturer:: Teral Asia Ltd

Company Name
Teral Asia Ltd
Address
Room 1001 10/F, Olympia Plaza, 255 Kings Road, North Point
Country
Hong Kong

View All Listings by this Company

WRAS Approval Number: #250902720

Range of multistage centrifugal pumps with stainless-steel housings, stainless-steel impellers and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250902720
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN25 - DN200 flanged.
Marking:: Dooch, model, serial number and technical info on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 30/09/2030
Proviso:: The discharge from the drain core must be made via a type AA, AB or AD air gap, or in accordance with EN 1717.
Model:: XRLNa-b-c-d Where: XRL = model. With N = Wetted metallic material in SUS316L, Without N = Wetted metallic material in SUS304. a = Rated flow in m³/h (1 – 255). DN25 = 1-3. DN32 = 4-5. DN40 = 10. DN50 = 15-20. DN65 = 32. DN80 = 45. DN100 = 64 or 95. DN150 = 125-155. DN200 = 185-255. b = Number of impellers (stages 1 – 36). DN25 & DN32 models with 1 – 36 stages. DN40 models with 1 – 22 stages. DN50 models with 1 – 17 stages. DN65 models with 1 – 14 stages. DN80 models with 1 – 13 stages. DN100 models with 1 – 8 stages. DN150 models with 1 – 10 stages. DN200 models with 1 – 8 stages. c = Number of cutting impellers (0 – 3). (Note: c can be omitted when c = 0.) d = DN size (DN25 – DN200). (Note: d can be omitted.) E.g., XRL32-7-2-DN65 denotes: Pump is made of SUS304, rated flow 32 m³/h, 7 impellers, 2 cutting impellers and size DN65.

Product Images

Approval Holder:: SHANGHAI SINO-KOREA DOOCH PUMP MFG. CO., LTD

Company Name
SHANGHAI SINO-KOREA DOOCH PUMP MFG. CO., LTD
Address
No 239 Zhangliantang Rd Liantang Ind Park Qingpu District Shanghai City China

View All Listings by this Company
Manufacturer:: ZHONGHAN DOOCH PUMP(HUZHOU)CO., LTD.

Company Name
ZHONGHAN DOOCH PUMP(HUZHOU)CO., LTD.
Address
NO 669 DAYANG ROAD KANGSHAN STREET HUZHOU ZHEJAING CHINA

View All Listings by this Company

WRAS Approval Number: #2307079

Shower handset with chrome plated plastic body. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2307079
Size:: ½” BSP M
Marking:: Intatec logo on body
Installation Requirements:: R001 R040
Expiry date:: 31/07/2028
Model:: HS10011CP

Product Images

Approval Holder:: Intatec Limited

Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

WRAS Approval Number: #2304111

Showers handset with plastic body (chromium plated). Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2304111
Size:: ½” BSP (M).
Marking:: Intatec logo on body
Installation Requirements:: R001 R040
Expiry date:: 30/04/2028
Model:: HS10012CP

Approval Holder:: Intatec Limited

Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

WRAS Approval Number: #250402068

Wall mounted finish set incorporating a dome type operating member and a shower hose and handset (chromium plated brass). Outlet to shower incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only. Maximum operating temperature 60°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250402068
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M)
Marking:: AXOR on hand shower and shower hose ferrule.
Installation Requirements:: R001 R040
Expiry date:: 30/04/2030
Model:: 10 651 xx0. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #2301378

Range of shower outlets with brass bodies (various finishes) and NBR ‘O’-rings. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2301378
Size:: 15mm compression
Marking:: Bagnodesign on handset & faceplate.
Installation Requirements:: R001 R040
Expiry date:: 31/01/2028
Model:: BDP-OUT-R602-XX ROUND WALL OUTLET WITH BRACKET BDD-HSW-535-A-XX & BDD-HSW-535-XX HAND SHOWERS XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

WRAS Approval Number: #250702055

Range of shower handsets and headsets with chromium plated plastic bodies incorporating check valves fitted at the inlets however, the complete products have not been fully tested to demonstrate they provide backflow prevention. Maximum working pressure: Open outlet. Maximum operating temperature: 60.0°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250702055
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP Male (shower handset)
Marking:: Deva on body.
Installation Requirements:: R001 R040
Expiry date:: 31/07/2030
Model:: HANS15 HANS15BB HANS15BK

Product Images

Approval Holder:: Methven UK Limited

Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

WRAS Approval Number: #250615016

Range of Y-patterned strainers with brass bodies and a stainless-steel mesh strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1715 Strainers
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” - 4” BSP (F)x(F).
Marking:: Herz "heart" logo on plug. PN, DN &flow arrow on body.
Installation Requirements:: R001 R120
Expiry date:: 30/06/2030
Model:: 2 2662 01 - DN15 2 2662 02 - DN20 2 2662 03 - DN25 2 2662 04 - DN32 2 2662 05 - DN40 2 2662 06 - DN50

Approval Holder:: Herz Armaturen GmbH

Company Name
Herz Armaturen GmbH
Address
Richard - Strauss Strasse 22, A-1230, Vienna
Country
Austria

View All Listings by this Company

WRAS Approval Number: #250912002

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:: 1715 Strainers
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)
Marking:: Manufacturers logo (H), size, pressure rating and flow arrow on body. Product info on data plate.
Installation Requirements:: R001
Expiry date:: 30/09/2030
Model:: F2143W

Approval Holder:: TECOFI

Company Name
TECOFI
Address
2 Rue Barthélemy Thimonier ZAC Everest Lyon
Postcode
69740
Country
France
General Email
j.ortega@tecofi.fr

View All Listings by this Company
Manufacturer:: Ningbo Yongxiang Copper Pipeline Co. Ltd

Company Name
Ningbo Yongxiang Copper Pipeline Co. Ltd
Address
Hehua Bridge, Yunlong Town, Yinzhou District, Ningbo, China
General Email

View All Listings by this Company

WRAS Approval Number: #250408025

Range of in-line Y patterned strainers with bronze bodies and a stainless-steel mesh strainer. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:: 1715 Strainers
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Honeywell logo, PN & Size on bonnet. Size, DN & flow arrow on body.
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: V3-YST-A150-B015N. :1/2” V3-YST-A150-B020N. :3/4” V3-YST-A150-B025N. :1” V3-YST-A150-B032N. :1-1/4” V3-YST-A150-B040N. :1-1/2” V3-YST-A150-B050N. ：2”

Approval Holder:: Honeywell International Middle East

Company Name
Honeywell International Middle East
Address
EMAAR BUSINESS PARK 1st St Dubai
Country
United Arab Emirates
General Email
Mona.Ali@Honeywell.com

View All Listings by this Company