'Expoband H45'. Grey coloured, extruded, flexible FPO expansion joint membrane. For use with water up to 60°C.
Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass bodies). Flow is controlled by a solenoid valve that is activated via an infrared sensor. The spout outlet incorporates an aerator. Maximum working pressure: 8.0 Bar. Maximum operating temperature 65°C.
Concealed WC dual flushing cistern with a side entry BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure – 10.0 bar, cold water use only.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SH-T8089D-** | Various | ¾” to ½” Offset Unions. | 5 bar | 75 °C | SHANHU | BODY | No | 1/4 Turn ceramic disk | |||
| SH-T8089-** | Various | ¾” to ½” Offset Unions. | 5 bar | 75 °C | SHANHU | BODY | No | 1/4 Turn ceramic disk | |||
| SH-T80810-** | Various | ¾” to ½” Offset Unions. | 5 bar | 75 °C | SHANHU | BODY | No | 1/4 Turn ceramic disk | |||
| SH-T80810D-** | Various | 15mm compression union | 5 bar | 75 °C | SHANHU | BODY | No | 1/4 Turn ceramic disk |
-**Represents the following different surface treatments: 1.PB-ARTISAN BRASS 2.EB-Matte black 3.CP-CHROME
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JD-AT2** | Various | BSP 1/2" (F) x BSP 3/4" (F) | 10 bar | 60 °C | Kind | Body | No | 1/2 Turn ceramic disk | Not Applicable | Not Applicable | |
| JD-AT3** | Various | BSP 1/2" (F) x BSP 3/4" (F) | 10 bar | 60 °C | Kind | Body | No | 1/2 Turn ceramic disk | Not Applicable | Not Applicable |
Note: ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed
Non-verifiable single check valve assembly consisting of a spring loaded, resilient trim, single check valve cartridge within a DZR brass body. Compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Non verifiable double check valve assembly incorporating a screw down stop valve, with nickel plated DZR brass body. Maximum working pressure 10 Bar. Cold water use only.
Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body. The products incorporate a drain port between the cartridges. Compression connection for use with copper pipe to BS EN1057 Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C
Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies (brass bodies – various finishes) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C
Single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assembly (brass bodies – various finishes) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C
Page 1087 of 1181
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
