Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2309044

Range of wall mounted combination boilers providing domestic hot water via a heat exchanger and pressurised central heating system. The products can be supplied with a rigid or flexible filling loop or keyless filling link. The flexible and rigid filling loops incorporate a flexible hose or copper pipe, isolation valve, double check valve assembly (suitable for back flow protection against fluid category 3). The keyless filling link incorporates a CAB backflow prevention device (suitable for back flow protection against fluid category 3). The products also incorporate an expansion vessel and pressure relief valve set at 3.0 bar. Maximum working pressure of primary circuit 2.5 bar. Maximum operating temperature of primary circuit 85°C Maximum working pressure of secondary circuit 8.0 bar Maximum operating temperature of secondary circuit 60°C

Section:: 1465 Heaters
Section Subtitle:: Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:: 2309044
Note:: When installing the keyless filling link, the discharge from the relief outlet port of this fitting must be made via a type AA, AB or AD air gap, or in accordance with EN 1717.
Size:: ¾” BSP (M) (primary circuit). ½” BSP (M) (secondary circuit).
Marking:: Baxi on front cover.
Installation Requirements:: R001 R140 R360
Expiry date:: 30/09/2028
Model:: 7796586 BAXI 624 COMBI 2 7796587 BAXI 630 COMBI 2 7796588 BAXI 636 COMBI 2 7813609 BAXI 624 COMBI LPG 2 7814304 BAXI 824 COMBI 2 7814305 BAXI 830 COMBI 2 7814306 BAXI 836 COMBI 2 7814307 BAXI 830 COMBI LPG 2 7814308 BAXI 836 COMBI LPG 2 7814309 BAXI ASSURE 524 COMBI 2 7814310 BAXI ASSURE 530 COMBI 2 7814311 BAXI ASSURE 536 COMBI 2 7814312 BAXI ASSURE 530 COMBI LPG 2

Approval Holder:: Baxi Heating UK Limited

Company Name
Baxi Heating UK Limited
Address
Brooks House, Coventry Road, Warwick
Postcode
CV34 3LL

View All Listings by this Company

WRAS Approval Number: #2309034

Magnetic non-return valve with a brass body and EPDM seals. Maximum working pressure 16.0 Bar. Cold water use only.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 2309034
Note:: Not suitable for backflow protection. This product does not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should be made to `Backflow Prevention Devices`.
Size:: 1" NPT captive nut (F) x 3/4" BSP (M) inlet x outlet
Marking:: Water Flow Tech logo, Size & PN on body
Installation Requirements:: R001
Expiry date:: 30/09/2028
Model:: Model Type LFC

Approval Holder:: Water Flow-Tech Ltd

Company Name
Water Flow-Tech Ltd
Address
6/31 Mercaz Sapir, POB 34264 Jerusalem
Country
Israel

View All Listings by this Company

WRAS Approval Number: #2310028

Range of hose assemblies. Models B0301-148036-000 & B0301-148038-000 comprise of a spherical valve, stainless-steel braided EPDM lined flexible hose and double check valve assembly (suitable for backflow protection against fluid category 3). Model B0301-148037-000 comprises of a double check valve assembly (suitable for backflow protection against fluid category 3), stainless-steel braided EPDM lined flexible hose and ‘T’ type spherical valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 2310028
Note:: If used as a filling loop assembly, an additional servicing valve is downstream of the flexible hose.
Size:: 15mm compression inlet/outlet
Marking:: Fanski logo, WRAS and year of manufacture (YYYY) on hose ferrule. Flow arrow, Size and DR on check valve body.
Installation Requirements:: R001
Expiry date:: 31/10/2028
Model:: B0301-148036-000 B0301-148037-000 B0301-148038-000

Approval Holder:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company
Manufacturer:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company

WRAS Approval Number: #2309343

Range of circulating pumps with a bronze body, plastic impeller and EPDM gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2309343
Size:: 1” BSP (M) or 1½” BSP (M).
Marking:: Rating plate on body including: Wilo, class, PN, model no. and date of production (YYWW).
Installation Requirements:: R001
Expiry date:: 30/09/2028
Model:: Z Range: Z15/6-* **130**, Z15/7-* **130**, Z20/2-* **130**, Z20/2-* **140**, Z20/5-* **140**, Z20/6-* **140**, Z20/7-* **140**, Z25/6-* **180**, Z25/7-* **180**. Where: 15/20/25 = connection size: 15 or 20 = 1” BSP (M), 25 = 1½” BSP (M). 2/5/6/7 = motor power (head in mWC). * = speed number: 1,2 or 3. 1st ** = electrical connection: PL, PR, CLR, CLF, CRR, CRF, FSL, FSR. 130/140/180 = Pump body dimension (height in mm). 2nd ** = terminal box position: 12,3,6 or 9 o’clock. Example code: Z25/6-3 PL 180 12.

Approval Holder:: WILO INTEC

Company Name
WILO INTEC
Address
50 Avenue Eugene Casella, Aubigny sur nere
Postcode
18700
Country
France
Phone
+332 48 81 62 62
General Email
franck.guillaume@wilo.com

View All Listings by this Company

WRAS Approval Number: #2307022

Range of shower handsets with chrome plated plastic bodies. Some models incorporate a plastic aerator at the outlet of the shower and/or a plastic flow regulator and strainer on the inlet.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2307022
Note:: Open outlet use only.
Size:: ½” BSP M
Marking:: Solex on body
Installation Requirements:: R001 R040
Expiry date:: 31/07/2028
Model:: P70300 P85500 P85800 P71500 P71600 P61402 P83600 P83500 P85300 P85301 P85302 39173W-CP P85303 P82700 P89200 P89201 P87500 P90800 P90700 P87400 P88500 P90100 P88700 P88900 P90200

Approval Holder:: Xiamen Solex High-Tech Industries Co., Ltd.

Company Name
Xiamen Solex High-Tech Industries Co., Ltd.
Address
No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022
Country
China
General Email
brian_lin@mysolex.com

View All Listings by this Company
Manufacturer:: Xiamen Solex High-Tech Industries Co., Ltd.

Company Name
Xiamen Solex High-Tech Industries Co., Ltd.
Address
No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022
Country
China
General Email
brian_lin@mysolex.com

View All Listings by this Company