Directory Search Results

Print List

#260104005

Range of manually operated balancing valves incorporating bronze bodies, non-rising spindle balancing mechanism, EPDM washer & ‘O’-rings with either a metal or rubber seat. Maximum working pressure 25.0 bar. Maximum operating temperature 85ºC.

Section:
2348 Valves
Section Subtitle:
Balancing.
WRAS Approval Number:
260104005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
Kids & logo, flow arrow, PN & DN on body. Kids and WRAS on operating member.
Installation Requirements:
R001
Expiry date:
31/01/2031
Model:
KFDRV25 Metal seated: ½” BSP (F), ¾” BSP (F) Rubber seated: 1” BSP (F), 11/4” BSP (F), 11/2” BSP (F) & 2” BSP (F)

Approval Holder:
Kids Pipe Accessories LLC
Company Name
Kids Pipe Accessories LLC
Address
44 SVETI KNIAZ BORIS I ST. 5100 GORNA ORYAHOVITZA
Country
Bulgaria

View All Listings by this Company

Print This Approval


#250855043

'SikaGrout-800'. Site applied, grey coloured Cementitious grout. Mix grout and water in an 8:1 weight ratio and apply as manufacturer's IFU 'Issue No.: 1', issued 'July 2024'. For use with water up to 35°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5061 Concrete, Cement and Mortar
Section Subtitle:
Cementitious grouts.
WRAS Approval Number:
250855043
Expiry date:
31/08/2030

Approval Holder:
Sika Ltd.
Company Name
Sika Ltd.
Address
Watchmead, Welwyn Garden City, Hertfordshire
Postcode
AL7 1BQ
Country
United Kingdom
Phone
01707 394444
General Email
sales@uk.sika.com

View All Listings by this Company

Print This Approval


#251155015

'Tesnit BA-50'. Green coloured NBR/fibre material manufactured by calendering. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

Section:
5075 Fibre
Section Subtitle:
These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.
WRAS Approval Number:
251155015
Expiry date:
30/11/2030

Approval Holder:
Donit Tesnit d.o.o.
Company Name
Donit Tesnit d.o.o.
Address
Cesta Komandanta Staneta 38, Sl 1215 Medvode
Country
Slovenia
Phone
+386 1 5823 300 Fax: +386 61182 3206

View All Listings by this Company

Print This Approval


#250955055

'AFIL BLUE Tank Panel'. Beige coloured GRP tank panel manufactured by continuous winding. For use with water up to 60°C.

Section:
5120 Glass Reinforced Plastics (GRP)
Section Subtitle:
Components.
WRAS Approval Number:
250955055
Expiry date:
30/09/2030

Approval Holder:
Amiantit Fiberglass Industry Ltd. (Dammam)
Company Name
Amiantit Fiberglass Industry Ltd. (Dammam)
Address
10th Street First Industrial City, PO Box 589, Dammam, 31421
Country
Saudi Arabia
General Email
info@amiantit.com

View All Listings by this Company

Print This Approval


#250955056

'AFIL BLUE Pipe'. Beige coloured GRP pipe manufactured by continuous winding. For use with water up to 60°C.

Section:
5120 Glass Reinforced Plastics (GRP)
Section Subtitle:
Components.
WRAS Approval Number:
250955056
Expiry date:
30/09/2030

Approval Holder:
Amiantit Fiberglass Industry Ltd. (Dammam)
Company Name
Amiantit Fiberglass Industry Ltd. (Dammam)
Address
10th Street First Industrial City, PO Box 589, Dammam, 31421
Country
Saudi Arabia
General Email
info@amiantit.com

View All Listings by this Company

Print This Approval


#250855045

'AQUAFLOW HDPE PE80 BLUE PIPE'. Extruded, single layered (blue coloured) or dual layered (black coloured inner layer & blue coloured outer layer) HDPE pipes. For use with water up to 23°C.

Section:
5240 Polyethylene
Section Subtitle:
Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:
250855045
Expiry date:
31/08/2030

Approval Holder:
Kalsi Plastics (UK) Limited
Company Name
Kalsi Plastics (UK) Limited
Address
Kalsi House 5 Tomey Road Sparkhill Birmngham
Postcode
B11 2NJ
Country
United Kingdom
General Email
sales@kalsiplastics.co.uk

View All Listings by this Company

Print This Approval


#250955058

'DP PP-R Pipe'. Green coloured, extruded PP-R pipe. For use with water up to 50°C.

Section:
5260 Polypropylene
Section Subtitle:
Components.
WRAS Approval Number:
250955058
Expiry date:
30/09/2030

Approval Holder:
Elshorbagy Group
Company Name
Elshorbagy Group
Address
Plot 1/6130, 6th Industrial Zone, Sadat City
Country
Egypt

View All Listings by this Company

Print This Approval


#250955057

'70 EP111p' Lip Seals and 'O' rings. Black coloured, EPDM components with shore hardness of 70. Compression moulded Lip Seals have an in-radius size of 2.7mm. Compression moulded ‘O’ rings have an in-radius size of 1.5mm. Injection moulded ‘O’ rings have an in-radius size of 1.0mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
250955057
Expiry date:
30/09/2030

Approval Holder:
Bode GmbH
Company Name
Bode GmbH
Address
Kirchweg 114, 24558 Henstedt-Ulzburg
Country
Germany
Phone
Tel: +49 4193 9821234 Fax: +49 4193 9822244

View All Listings by this Company

Print This Approval


#251055031

'TIMO 5-70 Gaskets & ‘O’ rings'. Black coloured, injection moulded EPDM gaskets & ‘O’ rings. Shore hardness 70. Tested in-radius size between 0.50mm & 2.66mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
251055031
Expiry date:
31/10/2030

Approval Holder:
Tecnogomma International SpA
Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Country
Italy
Phone
0039 035 933 839

View All Listings by this Company

Print This Approval


#251055029

'7571E'. Black coloured, injection moulded EPDM material. Shore hardness 55. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
251055029
Expiry date:
31/10/2030

Approval Holder:
Trelleborg Pipe Seals
Company Name
Trelleborg Pipe Seals
Address
Pascallaan 80, 8218NJ Lelystad
Country
Netherlands

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1072 of 1180

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.