Directory Search Results

Print List

#2212117

Range of water meters with brass bodies, plastic turbines and EPDM washers. Inlets incorporate a plastic filter. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 50°C

Section:
1505 Water Meters
Size:
DN15 – DN 40 - ¾” – 2” Male BSP, DN 50 – DN50 Flange.
Marking:
Genebre and other technical info on meter face. Size and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/12/2027
Model:
6029 – ¾” BSP (M), 1” BSP (M), 1 ¼” BSP (M), 1 ½” BSP (M), 2” BSP (M), DN 50.

Approval Holder:
Genebre, S.A
Company Name
Genebre, S.A
Address
Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat
Postcode
08908
Country
Spain
Phone
(+34) 93 298 80 00
General Email
cazorla@genebre.es

View All Listings by this Company

Print This Approval


#2302707

Range of water meters with blue epoxy coated ductile iron bodies, plastic measurement chambers and vanes and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Size:
Flanged inlet/outlet: DN40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400.
Marking:
Flow arrow & size on side of body, Genebre, size, Model number and pressure rating and product info on dial face.
Installation Requirements:
R001
Expiry date:
29/02/2028
Model:
6060 & 6060A

Approval Holder:
Genebre, S.A
Company Name
Genebre, S.A
Address
Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat
Postcode
08908
Country
Spain
Phone
(+34) 93 298 80 00
General Email
cazorla@genebre.es

View All Listings by this Company

Print This Approval


#2312804

Range of water meters with brass bodies and plastic turbines. The inlet incorporates a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Size:
¾” BSP (M) inlet/outlet (DN15). 1” BSP (M) inlet/outlet (DN20). 1¼” BSP (M) inlet/outlet (DN25). 1½” BSP (M) inlet/outlet (DN32) 2” BSP (M) inlet/outlet (DN40)
Marking:
Genebre, year of manufacture (yy), ‘NWM’ & technical info on dial facer. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/12/2028
Model:
6110C 6115C 6120C 6111C 6121C

Approval Holder:
Genebre, S.A
Company Name
Genebre, S.A
Address
Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat
Postcode
08908
Country
Spain
Phone
(+34) 93 298 80 00
General Email
cazorla@genebre.es

View All Listings by this Company

Print This Approval


#240902086

Range of water meters with either cast iron (blue epoxy coated) or stainless-steel bodies, transducers and EPDM rubber O-rings. Maximum working pressure 25.0 Bar. Maximum operating temperature 50.0°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Flanged - DN40 to DN100.
Marking:
Hidroconta, NAUTILUS and product information on face.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
NAUTILUS

Approval Holder:
Hidroconta S.A.
Company Name
Hidroconta S.A.
Address
Ctra Santa Catalina 60 30012 Murcia Spain
General Email
ivan@hidroconta.com

View All Listings by this Company

Print This Approval


#240988028

Range of wall brackets (brass bodies – various finishes). Open outlet use only Maximum working temperature 85°C

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
ACY1013 & ACY1014 Aqualisa on body 706083 Elisa on body
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
ACY1013 BRASS WALL OUTLET ACY1014 BRASS WALL OUTLET WITH COMBINED HANDSET HOLDER 706083 BRASS WALL OUTLET WITH COMBINED HANDSET

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2110149

Range of flexible joints incorporating an EPDM (inner & outer) joint with a steel reinforcing ring and two carbon steel flanges. Maximum operating pressure 16.0 bar. Maximum operating temperature 65°C.

Section:
1530 Miscellaneous Fittings
Size:
DN32 - DN150 flange
Marking:
DST Group on adhesive label on body DN, PN & YY/MM etched on body
Installation Requirements:
R001
Expiry date:
31/10/2026
Model:
PF16W032 PF16W040 PF16W050 PF16W065 PF16W080 PF16W100 PF16W125 PF16W150

Approval Holder:
DST Group Ltd
Company Name
DST Group Ltd
Address
Piksa House 2 Penrod Way Heysham Lancashire
Postcode
LA3 2UZ
Phone
01524 389 494

View All Listings by this Company

Print This Approval


#250307701

“TP/TPE series 100” single stage centrifugal pumps, incorporating cast iron (with black coloured electrocoating) or stainless-steel bodies and plastic impellers. Maximum working pressure: Cast iron models: 16.0 bar, Stainless steel models: 10.0 bar. Maximum operating temperature: Cast iron models: 60°C, Stainless steel models: 85°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250307701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1½”-2” BSP (M) inlet/outlet. DN40 Flanged inlet/outlet.
Marking:
Grundfos and Grundfos logo, type, model, product no., technical info and manufacturing country on data plate. Grundfos and Grundfos logo on motor. Flow arrow on body.
Installation Requirements:
R001 R415
Expiry date:
31/03/2030
Model:
TP(E)100 series: TP (E) XX-XXX/2 A or AI or X - F or O - A or I - XXXX Where: TP = pump type with normal Asynchronous motor. TPE = pump type with E-motor (motor with integrated frequency driver). XX = nominal DN size of inlet/outlet ports (25 - 40). XXX = maximum head (dm) (50 - 90). /2 = pole number. A or AI or X = A: Basic version, AI: PN6 flange, X: Special Version. F or O = F: DIN Flanged, O: Union (threaded). A or I = A: Basic Version. Cast iron pump housing and motor stool, I: S/Steel pump housing and motor stool. XXXX = shaft seal type - BQQE or BQBE. YYY = coding for motor. E.g. TP (E) 32-60/2 A-F-A-BQQE-CX1
Product Images

Approval Holder:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

Print This Approval


#250307702

“TPE 2 & TPE3 series” single stage centrifugal pumps, incorporating cast iron (with black coloured electrocoating) or stainless-steel bodies and plastic impellers. Maximum working pressure 10.0 bar. Maximum operating temperature: Cast iron models: 60°C, Stainless steel models: 85°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250307702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Cast iron models: DN32 - DN100 Flanged inlet/outlet. Stainless steel models: DN32 - DN65 Flanged inlet/outlet.
Marking:
Grundfos and Grundfos logo, type, model, product no., technical info and manufacturing country on data plate. Grundfos and Grundfos logo on control unit.
Installation Requirements:
R001 R415
Expiry date:
31/03/2030
Model:
TPE2/3 series: TPE 2 or 3 (E) XX-XXX S or N - A or AI or X - F - A or I - XXXX - YYY Where: TPE2 = pump type with normal Asynchronous motor. TPE3 = pump type with E-motor (motor with integrated frequency driver). XX = nominal DN size of inlet/outlet ports (cast iron 32 - 100, S/Steel 32 - 65). XXX = maximum head (dm). S or N = S: Built-in differential-pressure and temperature sensor (TPE3 models), N: Without built-in sensor (TPE2 models). A or AI or X = A: Basic version, AI: PN6 flange, X: Special Version. F = DIN Flanged. A or I = A: Basic Version. Cast iron pump housing and motor stool, I: S/Steel pump housing and motor stool. XXXX = shaft seal type - BQQE or BQBE. YYY = coding for motor. E.g. TPE3 100-120 S-X-F-A-BQQE-GAB
Product Images

Approval Holder:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

Print This Approval


#240504720

‘Vari RS’ range of single, twin & triple cold water booster sets. The products incorporate one or more pumps, expansion vessels, isolation valves and non-return valves (not suitable for backflow protection). The twin and triple models include a suction and discharge manifold. Maximum working pressures - see model. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240504720
Size:
See model.
Marking:
Single models: DPT, Tel No. and website on adhesive label on the pump. Twin and Triple models: DPT, Tel No. and website on adhesive label on the consumer box.
Installation Requirements:
R001 R415
Expiry date:
31/05/2029
Model:
Single booster - 1” BSP (F) inlet/1” BSP (F) outlet: 1RS302/8DPT (1.5 bar), 1RS305/8DPT (4 bar), 1RS306/8DPT (4.5 bar), 1RS307/8DPT (5 bar), 1RS308/8DPT (5.25 bar). Single booster - 1¼” BSP (F) inlet/1” BSP (F) outlet: 1RS502/8DPT (1.75 bar), 1RS505/8DPT (4.5 bar), 1RS506/8DPT (5 bar), 1RS507/8DPT (6.5 bar), 1RS508/8DPT (7 bar). Single booster - 1½” BSP (F) inlet/1¼” BSP (F) outlet: 1RS1002/8DPT (1.8 bar), 1RS1003/8DPT (2.5 bar), 1RS1004/8DPT (3.5 bar), 1RS1005/8DPT (4 bar), 1RS1006/8DPT (5 bar). Twin booster - 2” BSP (M) inlet/1¼” BSP (M) outlet: 2RS302/8DPT (1.5 bar), 2RS305/8DPT (4 bar), 2RS306/8DPT (4.5 bar), 2RS307/8DPT (5 bar), 2RS308/8DPT (5.25 bar), 2RS502/8DPT (1.75 bar), 2RS505/8DPT (4.5 bar), 2RS506/8DPT (5 bar), 2RS507/8DPT (6.5 bar), 2RS508/8DPT (7 bar). Twin booster - 2½” BSP (M) inlet/2” BSP (M) outlet: 2RS1002/8DPT (1.8 bar), 2RS1003/8DPT (2.5 bar), 2RS1004/8DPT (3.5 bar), 2RS1005/8DPT (4 bar), 2RS1006/8DPT (5 bar), Triple booster - 2½” BSP (M) inlet/2” BSP (M) outlet: 3RS302/8DPT (1.5 bar), 3RS305/8DPT (4 bar), 3RS306/8DPT (4.5 bar), 3RS307/8DPT (5 bar), 3RS308/8DPT (5.25 bar), 3RS502/8DPT (1.75 bar), 3RS505/8DPT (4.5 bar), 3RS506/8DPT (5 bar), 3RS507/8DPT (6.5 bar), 3RS508/8DPT (7 bar), 3RS1002/8DPT (1.8 bar), 3RS1003/8DPT (2.5 bar), 3RS1004/8DPT (3.5 bar), 3RS1005/8DPT (4 bar), 3RS1006/8DPT (5 bar). Models added July 2024: Single booster - 1” BSP (F) inlet/1” BSP (F) outlet: 1RS3-5/8/GF (4 bar), 1RS3-7/8/GF (5 bar), 1RS306/8/LW (4.5 bar), 1RS308/8/LW (5.25 bar). Single booster - 1¼” BSP (F) inlet/1” BSP (F) outlet: 1RS5-5/8/GF (4.5 bar), 1RS5-7/8/GF (6.5 bar), 1RS506/8/LW (5 bar), 1RS508/8/LW (7 bar). Single booster - 1½” BSP (F) inlet/1¼” BSP (F) outlet: 1RS10-3/8/GF (2.5 bar), 1RS1004/8/LW (3.5 bar), 1RS1006/8/LW (5 bar). Twin booster - 2” BSP (M) inlet/1¼” BSP (M) outlet: 2RS3-5/8/GF (4 bar), 2RS3-7/8/GF (5 bar), 2RS306/8/LW (4.5 bar), 2RS308/8/LW (5.25 bar), 2RS5-5/8/GF (4.5 bar), 2RS5-7/8/GF (6.5 bar), 2RS506/8/LW (5 bar), 2RS508/8/LW (7 bar). Twin booster - 2½” BSP (M) inlet/2” BSP (M) outlet: 2RS10-3/8/GF (2.5 bar), 2RS1004/8/LW (3.5 bar), 2RS1006/8/LW (5 bar). Triple booster - 2½” BSP (M) inlet/2” BSP (M) outlet: 3RS3-5/8/GF (4 bar), 3RS3-7/8/GF (5 bar), 3RS5-5/8/GF (4.5 bar), 3RS5-7/8/GF (6.5 bar), 3RS10-3/8/GF (2.5 bar), 3RS306/8/LW (4.5 bar), 3RS308/8/LW (5.25 bar), 3RS506/8/LW (5 bar), 3RS508/8/LW (7 bar), 3RS1004/8/LW (3.5 bar), 3RS1006/8/LW (5 bar).

Approval Holder:
Direct Pumps and Tanks Limited
Company Name
Direct Pumps and Tanks Limited
Address
Unit 12 Cossall Industrial Estate Ilkeston Derbyshire
Postcode
DE7 5UA
Phone
0115 9444474

View All Listings by this Company
Manufacturer:
Direct Pumps and Tanks Limited
Company Name
Direct Pumps and Tanks Limited
Address
Unit 12 Cossall Industrial Estate Ilkeston Derbyshire
Postcode
DE7 5UA
Phone
0115 9444474

View All Listings by this Company

Print This Approval


#250104703

Range of pumps with plastic bodies. Maximum working pressures: 41.007.400 model: 0.28 bar, 41.008.400 model: 0.38 bar. Maximum operating temperature 96°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250104703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
41.007.400: Ø12mm inlet/Ø9mm outlet. 41.008.400: Ø12mm inlet/Ø10mm outlet.
Marking:
A.u.K. Müller, model type, production date (WW/YY) and technical information on adhesive label on body.
Installation Requirements:
R001
Expiry date:
31/01/2030
Model:
41.007.400, 41.008.400.
Product Images

Approval Holder:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company
Manufacturer:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1061 of 1132

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.