Directory Search Results

Print List

#2312551

‘Drei Bond 5204’. Yellow coloured anaerobic adhesive paste. For use with water up to 85°C. This product is to be applied and cured in strict accordance with the manufacturer's instructions.

Section:
5520 Sealants - Screwed Joints
Section Subtitle:
Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions
WRAS Approval Number:
2312551
Expiry date:
31/12/2028

Approval Holder:
Drei Bond GmbH
Company Name
Drei Bond GmbH

View All Listings by this Company

Print This Approval


#2312040

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies), incorporating a solenoid valve controlling the flow which is actuated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The product also incorporates an integral hand dryer. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 43°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2312040
Size:
½” BSP M
Marking:
Dyson and Model on top of tap body
Installation Requirements:
R001 R006 R007
Expiry date:
31/12/2028
Model:
WD04 WD05

Approval Holder:
Dyson Manufacturing SDN BHD.
Company Name
Dyson Manufacturing SDN BHD.
Address
Plo 208 Jalan Cyber 14 Senai Industrial Etsate IV
Country
81400 Senai

View All Listings by this Company

Print This Approval


#2312041

Wall mounted single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies), incorporating a solenoid valve controlling the flow which is actuated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The product also incorporates an integral hand dryer. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 43°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2312041
Size:
½” BSP M
Marking:
Dyson and Model on top of tap body
Installation Requirements:
R001 R007 R040
Expiry date:
31/12/2028
Model:
WD06

Approval Holder:
Dyson Manufacturing SDN BHD.
Company Name
Dyson Manufacturing SDN BHD.
Address
Plo 208 Jalan Cyber 14 Senai Industrial Etsate IV
Country
81400 Senai

View All Listings by this Company

Print This Approval


#2301369

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3.5 litres. The cistern is operated by an electronically controlled flush valve. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2301369
Size:
½” BSP (M)
Marking:
Dolphin logo on flush panel Dolphin logo, Date of manufacturer DD.MM.YY on adhesive label, 6L & waterline mould on plastic support for flush valve
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2028
Model:
DB551x.E Dolphin Blue 126mm Electronic Cistern

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2111390

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111390
Size:
½” BSP (M)
Marking:
Ideal Standard on Adhesive below insert within cistern: 6L waterline within cistern.
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
R031767 Prosys 120 WC cistern Mech CL2 6L & R031867 Prosys 120 WC cistern Pneu CL2 6L

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 107 of 275

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.