Directory Search Results

Print List

#250255042

'LOCTITE® 2400™'. Blue coloured, liquid anaerobic adhesive. Apply as per manufacturer's technical data sheet reference ‘2’, dated November 2024. For use with water up to 23°C. These products are to be applied and cured in strict accordance with the manufacturer's instructions

Section:
5520 Sealants - Screwed Joints
Section Subtitle:
Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions
WRAS Approval Number:
250255042
Expiry date:
28/02/2030

Approval Holder:
Henkel Ltd.
Company Name
Henkel Ltd.
Address
Technologies House, Wood Lane End, Hemel Hempstead
Postcode
HP2 4RQ
Country
Herts
Phone
+44 1442 278 100
General Email
loctite.connect@henkel.com

View All Listings by this Company

Print This Approval


#250255043

'LOCTITE® 6300™’. Green coloured anaerobic adhesive. Apply as per manufacturer's technical data sheet reference ‘0.1’, dated November 2024. For use with water up to 85°C. These products are to be applied and cured in strict accordance with the manufacturer's instructions

Section:
5520 Sealants - Screwed Joints
Section Subtitle:
Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions
WRAS Approval Number:
250255043
Expiry date:
28/02/2030

Approval Holder:
Henkel Ltd.
Company Name
Henkel Ltd.
Address
Technologies House, Wood Lane End, Hemel Hempstead
Postcode
HP2 4RQ
Country
Herts
Phone
+44 1442 278 100
General Email
loctite.connect@henkel.com

View All Listings by this Company

Print This Approval


#250255044

'LOCTITE® 5400™’. Yellow coloured anaerobic adhesive. Apply as per manufacturer's technical data sheet reference ‘0.3’, dated November 2024. For use with water up to 85°C. These products are to be applied and cured in strict accordance with the manufacturer's instructions

Section:
5520 Sealants - Screwed Joints
Section Subtitle:
Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions
WRAS Approval Number:
250255044
Expiry date:
28/02/2030

Approval Holder:
Henkel Ltd.
Company Name
Henkel Ltd.
Address
Technologies House, Wood Lane End, Hemel Hempstead
Postcode
HP2 4RQ
Country
Herts
Phone
+44 1442 278 100
General Email
loctite.connect@henkel.com

View All Listings by this Company

Print This Approval


#250255033

'Weld-On 705 ECO Clear PVC cement'. Clear solvent cement. Apply as per manufacturers technical data sheet '705 ECO-09-2024'. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5560 Solvent Cements
Expiry date:
28/02/2030

Approval Holder:
IPS Corporation
Company Name
IPS Corporation
Address
445 W. Victoria Street, Compton, California 90220
Country
USA
Phone
(310) 898-3300
General Email
info@ipscorp.com

View All Listings by this Company

Print This Approval


#250304719

WC douche set including a trigger spray, flexible hose and wall outlet with stop lever. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:
0278 Bidets and associated fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Marking:
THG on fitting body.
Installation Requirements:
R001 R090 R415
Expiry date:
31/03/2030
Model:
5840/11/W Finishes: A02-Polished Chrome ; A13-Smoked Brass ; B01-Polished Nickel ; C01-Matte Nickel ; C02-Matte Chrome ; C27-Unlacquered Brass ; C47-Smoked Nickel ; D01-Light Bronze Lacquered ; D05-Lacquered Matte Bronze ; D10-USA Oil-Rubbed Bronze ; D12-Polished Brass Lacquered ; D15-Polished Black Lacquered ; D16-White Lacquered ; D18-Matte Black lacquered ; D21-Old Oil-Rubbed Bronze ; D24-Aranja ; H17-Matt Aranja ; F01-Polished Gold ; F07-Matte Gold ; F18-Rhodium Silver ; F19-Matt Rhodium Silver ; F27-Rose Gold ; F30-Soft Gold ; F31-Matte Soft Gold ; F33-Brown Bronze PVD ; F34-Matte Brown Bronze PVD ; G01-Polished Nickel/Polished Gold ; G02-Polished Chrome/Polished Gold ; H03-Lacquered Antique Silver ; H07-Varnished Matte Antique Red Copper ; H08-Lacquered Matte Antique Silver ; H24-Lacquered Antique Copper ; H28-Antique Nickel ; H49-Brass PVD ; H50-Matte Brass PVD ; H52-Gold PVD ; H53-Matte Gold PVD ; H55-Nickel PVD ; H56-Matte Nickel PVD ; H60-Matte Blush PVD ; H62-Blush PVD ; H64-Graphite PVD ; H65-Matte Graphite PVD ; H66-Umber PVD ; H67-Matte Umber PVD Styles : - 5840/11/W: G6G New Spirit ; G6H New Spirit à manettes ; G7K Soho 2023 ; G7L SOHO METAL (nouveau design) ; G7R Yoko ; G7S Yoko Color ; G7T Yoko Ice ; G7U Yoko Howlite ; G7V Yoko Delta ; G7W Yoko Delta Howlite For explanation: A complete code number compile three information’s, for example: -A02-5840/11/W (SERIE-FINISH-ARTICLE). This would give you a Bath/shower set with goliath spout, 2x ¾” valve, rim mounted mixer taps with progressive cartridge & rim mounted hand shower set in Amboise Malachite style and polished chrome finish.
Product Images

Manufacturer:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80

View All Listings by this Company

Print This Approval


#250302001

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies). Flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
250302001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
TCK on tap body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/03/2030
Model:
TK-LT0001 TK-LT0003 TK-LT0022 TK-LT0024
Product Images

Manufacturer:
Xiamen OLT Co., Ltd.
Company Name
Xiamen OLT Co., Ltd.
Address
No.950, Tonglong 2nd Road, Xiamen Torch High-tech Zone (Xiang'an) Industrial Zone, Xiamen City
Country
China

View All Listings by this Company

Print This Approval


#250302021

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass bodies). The flow is controlled via a solenoid valve, activated via an infra-red sensor and temperature controlled via manual lever. The inlets incorporate single check valves cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
250302021
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, PEX lined flexible hose assemblies incorporating 1/2" BSP (F) captive nut end connections.
Marking:
TCK on body (TK-LT0023) TCK on top of tap (TK-LT-0025) TCK on spout (TK-LT0044, TK-LT0055 & TK-LT-0057)
Installation Requirements:
R001 R006 R010
Expiry date:
31/03/2030
Model:
TK-LT0023 TK-LT0025 TK-LT0044 TK-LT0055 TK-LT0057
Product Images

Manufacturer:
Xiamen OLT Co., Ltd.
Company Name
Xiamen OLT Co., Ltd.
Address
No.950, Tonglong 2nd Road, Xiamen Torch High-tech Zone (Xiang'an) Industrial Zone, Xiamen City
Country
China

View All Listings by this Company

Print This Approval


#250102706

Concealed WC dual flushing cisterns with a BS 1212- 4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a manually operated dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
250102706
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Honjim logo and WRAS logo on cistern cover. 6 litre line inside cistern.
Installation Requirements:
R001 R556
Expiry date:
31/01/2030
Model:
G-1030
Product Images

Approval Holder:
Zhejiang Honjim Intelligent Technology Co., Ltd
Company Name
Zhejiang Honjim Intelligent Technology Co., Ltd
Address
Port-neighboring Industrial estate, Jiantiao Town, Sanmen County, Taizhou City, Zhejiang Province,China

View All Listings by this Company

Print This Approval


#250302004

Floor standing, single hole, single outlet (fixed) combination tap assembly, (chromium plated brass body), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). The outlet to the shower incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0466 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)
WRAS Approval Number:
250302004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Dornbracht product “3594597090” is not part of this approval
Size:
Specifically for use with Dornbracht product “3594597090” which has ½” BSP (F) inlets
Marking:
Dornbracht on front of tap body
Installation Requirements:
R001 R010 R030
Expiry date:
31/03/2030
Model:
25863671
Product Images

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0

View All Listings by this Company

Print This Approval


#250302046

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes). Incorporating ceramic cartridge headworks with single lever operating members and a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3).The spout outlets incorporate plastic aerators. The shower outlet incorporates an approved single check valve cartridge, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0531 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)
WRAS Approval Number:
250302046
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
No shower hose, handset or riser rail is supplied with these products.
Size:
¾” to ½” BSP (M) offset unions
Marking:
Grohe on operating member
Installation Requirements:
R001 R030
Expiry date:
31/03/2030
Model:
24.335.xx1 32.743.xx1 where xx1 denotes finish, can be replaced by: 001 – Chrome DC1 – Supersteel DA1 – Warm sunset AL1 – Brushed hard graphite GL1 – Cool sunrise
Product Images

Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1056 of 1132

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.