Range of T-type thermostatic blending valves with DZR brass bodies (various finishes). Compression inlets incorporate a stainless-steel strainer and check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Push-fit inlets incorporate a check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. HEAT112050 & HEAT112055 models incorporate angled inlets with integral spherical valves. HEAT112010, HEAT112015, HEAT112050, HEAT112055 – Compression for use with copper pipe (to BSEN1057:2006) only. HEAT155001, HEAT155010 – Push fit for use with PEX pipe (to BS7291 part 3), Polybutylene pipe (to BS7291 part 2) & Copper pipe (to BSEN1057:2006). Maximum working pressure 10.0 bar at 20°C and 7.0 bar at 85°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240702012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

R010 applies to push-fit models only

Size:

Please refer to models.

Marking:

RWC logo, TMV and easyfit on cap. Date of manufacture (DWWYYLL), Flow arrow CR and H+ C on body. Models added January 2025: RWC logo on cap. CR, date of manufacture (D/WW/YY/LL), flow arrow and H+C on body

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2029

Model:

HEAT112 SERIES: HEAT112010: EASIFIT TMV 15MM 2: 1 COMPRESSION. HEAT112015: EASIFIT TMV 22MM 2: 1 COMPRESSION. HEAT112050: EASIFIT TMV 15MM 4: 1 COMPRESSION. HEAT112055: EASIFIT TMV 22MM 4: 1 COMPRESSION. HEAT155 SERIES: HEAT155001: EASIFIT TMV 12MM 2: 1 PUSH FIT. HEAT155010: EASIFIT TMV 15MM 2: 1 PUSH FIT. Models added May 2025: HEAT112100 ½” BSP M. HEAT112110 ¾” BSP M.

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of butterfly valves with ductile iron bodies (blue epoxy coating), EPDM seats and `O` rings. Gearbox and handwheel Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

2307366

Size:

DN50 to DN400, see model.

Marking:

Muller, Model, size, pressure rating & body material on dataplate on body.

Installation Requirements:

R001

Expiry date:

31/07/2028

Model:

D371X-16Q-50 D371X-16Q-65 D371X-16Q-80 D371X-16Q-100 D371X-16Q-125 D371X-16Q-150 D371X-16Q-200 D371X-16Q-250 D371X-16Q-300 D371X-16Q-350 D371X-16Q-400

Approval Holder:

Muller & Aigner Instruments Inc.

Company Name

Muller & Aigner Instruments Inc.

Address

3109-1888 Gilmore Avenue Burnaby V5C0L2 British Columbia

Country

Canada

View All Listings by this Company

2-way ceramic disc diverter incorporating a brass body. Maximum working pressure 5.0 bar Maximum operating temperature 85°C.

Section:

2050 Diverter

Section Subtitle:

Diverter cartridge(s) with manual adjustment.

WRAS Approval Number:

240502063

Size:

¾” BSP (F).

Marking:

Coalbrook logo on collar of trim set. Flow arrow on body.

Installation Requirements:

R001 R040

Expiry date:

31/05/2029

Model:

XX 2007 YY Where: XX denotes the trim option and will be represented by two letters. As examples: DO - ‘Domo’, DC - ‘Decca’, BA - ‘Bank’. YY denotes finish (which is a non-water contact part) and will be represented by two letters. As examples: BN - Brushed Nickel, CP - Chrome, GM - Gunmetal, SB - Stable Brass, BB - Brushed Brass. The XX 2007 YY concealed body must always be installed with a trim set.

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

Country

United Kingdom

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of fire hydrants with an epoxy coated, cast iron body, operated via a non-rising spindle headwork. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C

Section:

2070 Valves

Section Subtitle:

Fire hydrant. Where possible, above ground fire hydrants should be considered. The location of fire hydrants should be site specific and subject to assessment of fluid category risk.

WRAS Approval Number:

240604709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The location of fire hydrants should be site specific and subject to assessment of fluid category risk.

Size:

DN80 flanged connection

Marking:

BOSS, MODEL, WRAS & TECHNICAL INFORMATION ON METAL DATAPLATE ON BODY. DN, DI & PN ON BODY.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

25620001 - BOSS FIG 20 BS750 TYPE 2C (round thread connector) Valve Fire Hydrant.

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of ‘901’ float operated equilibrium inlet valves incorporating brass bodies and float arms. Maximum working pressure - See Models Maximum operating temperature – Cold water use only.

Section:

2100 Valves

Section Subtitle:

Float operated, equilibrium, metal.

WRAS Approval Number:

240702704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

No float supplied.

Size:

1/2" to 6"

Marking:

Pegler England 901 on body

Installation Requirements:

R001 R280

Expiry date:

31/07/2029

Model:

520007 - ½” (M) BSP - 14 bar 520008 - ¾” (M) BSP - 14 bar 520009 - 1” (M) BSP - 14 bar 520010 - 1.1/4” (M) BSP – 10 bar 520011 - 1.1/2” (M) BSP – 10 bar 520012 - 2” (M) BSP – 10 bar 520300 - 2.1/2” (M) BSP – 10 bar 520305 - 3” (M) BSP – 10 bar 520310 - 4” (M) BSP – 10 bar 520315 - 6” (M) BSP – 10 bar

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company