Range of ‘Superseal’ and ‘Speedfit’ push-fit fittings with acetal body’s (black or light grey) and NBR ‘O’ rings. For use with John Guest LLDPE tubing (Speedfit port only) and 316 stainless steel tubing manufactured to EN10088 (Superseal push-fit port only). Pipe inserts must be used for the LLDPE tube sizes 3/8” and ½”. Maximum working pressure: See models below. For cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2301017

Note:

Only black JG LLDPE tube should be installed with these fittings in areas exposed to light.

Size:

See models.

Marking:

JG LOGO on body. Size on collet.

Installation Requirements:

R001

Expiry date:

31/01/2028

Model:

SM010802S - 5/16" Superseal OD x 1/4" BSPT (M) STRAIGHT ADAPTOR 16 Bar, SM010812S - 5/16" Superseal OD x 1/4" BSP (M) STRAIGHT ADAPTOR 16.0 Bar, SM0108F4S - 5/16" Superseal OD x 1/4" MFL STRAIGHT ADAPTOR 16.0 Bar, SM410808E - 5/16" Superseal OD x 5/16" Superseal OD STRAIGHT ADAPTOR 16.0 Bar, SM040808S - 5/16" Superseal OD x 5/16" Speedfit OD STRAIGHT CONNECTOR 16.0 Bar, SI041012S - 5/16" Superseal OD x 3/8" Speedfit OD STRAIGHT CONNECTOR 10.0 Bar, SI041016S - 5/16" Superseal OD x 1/2" Speedfit OD STRAIGHT CONNECTOR 10.0 Bar, SI041210S - 3/8" Superseal OD x 5/16" Speedfit OD STRAIGHT CONNECTOR 10.0 Bar, SI041212S - 3/8" Superseal OD x 3/8" Speedfit OD STRAIGHT CONNECTOR 10.0 Bar, SI041216S - 3/8" Superseal OD x 1/2" Speedfit OD STRAIGHT CONNECTOR 10.0 Bar, SM040608E - 6MM Superseal OD x 8MM Speedfit OD STRAIGHT CONNECTOR 16.0 Bar, SM400808S - 5/16" Superseal OD x 5/16" Superseal OD ELBOW CONNECTOR 16.0 Bar, SI401210S - 3/8" Superseal OD x 5/16" Superseal OD ELBOW CONNECTOR 10.0 Bar, SI401212S - 3/8" Superseal OD x 3/8" Superseal OD ELBOW CONNECTOR 10.0 Bar, SI030812S - 1/4" Superseal OD x 3/8" Speedfit OD ELBOW CONNECTOR 10.0 Bar, SM030808S - 5/16" Superseal OD x 5/16" Speedfit OD ELBOW CONNECTOR 16.0 Bar, SI031012S - 5/16" Superseal OD x 3/8" Speedfit OD ELBOWCONNECTOR 10.0 Bar, SI031210S - 3/8" Superseal OD x 5/16" Speedfit OD ELBOWCONNECTOR 10.0 Bar, SI031212S - 3/8" Superseal OD x 3/8" Speedfit OD ELBOW CONNECTOR 10.0 bar, SM420808S - 5/16" Superseal OD x 5/16" Speedfit OD FLOWBEND CONNECTOR 16.0 Bar, SI421012S - 5/16" Superseal OD x 3/8" Speedfit OD FLOW BEND CONNECTOR 10.0 Bar, SI421212S - 3/8" Superseal OD x 3/8" Speedfit OD FLOW BEND CONNECTOR 10.0 Bar, SI270808S - 1/4" Superseal OD x 1/4" ID BARB CONNECTOR 16.0 Bar, SI271008S - 5/16" Superseal OD x 1/4" ID BARB CONNECTOR 16.0 Bar, SI271208S - 3/8" Superseal OD x 1/4" ID BARB CONNECTOR 10.0 Bar, SM120808S - 5/16" Superseal OD x 5/16" Speedfit OD BULKHEAD CONNECTOR 16.0 Bar.

Product Images

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of copper capillary, bronze or brass end feed fittings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Non-metallic materials and components comply with BS6920 at 99°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206359

Size:

See models

Marking:

FA.1512 and FA.2234 models only: Flowflex logo and 1254 on body. All other models: Flowflex logo, size and EN1254 on body.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

Model: Bronze fittings: 4090G.15X1/2: End Feed Female Elbow 15mm x ½”, 4090G.22X1/2: End Feed Female Elbow 22mm x ½”, 4090G.22X3/4: End Feed Female Elbow 22mm x ¾”, 4090G.28X1: End Feed Female Elbow 28mm x 1", 4090G.35X1.1/4: End Feed Female Elbow 35mm x 1 ¼”, 4090G.42X1.1/2: End Feed Female Elbow 42mm x 1 ½”, 4090G.54X2: End Feed Female Elbow 54mm x 2". 4092G.15X1/2: End Feed Male Taper Elbow 15mm x ½”, 4092G.22X3/4: End Feed Male Taper Elbow 22mm x ¾”, 4092G.28X1: End Feed Male Taper Elbow 28mm x 1". 4130G.15X1/2X15: End Feed Female Branch Tee 15 x ½” x 15mm, 4130G.22X1/2X22: End Feed Female Branch Tee 22 x ½” x 22mm, 4130G.22X3/4X22: End Feed Female Branch Tee 22 x ¾” x 22mm, 4130G.28X1/2X28: End Feed Female Branch Tee 28 x ½” x 28mm. 4243G.15X1/2: End Feed Male Taper Adaptor 15mm x ½”, 4243G.15X3/8: End Feed Male Taper Adaptor 15mm x ⅜”, 4243G.15X3/4: End Feed Male Taper Adaptor 15mm x ¾”, 4243G.22X1/2: End Feed Male Taper Adaptor 22mm x ½”, 4243G.22X3/4: End Feed Male Taper Adaptor 22mm x ¾”, 4243G.22X1: End Feed Male Taper Adaptor 22mm x 1", 4243G.28X1: End Feed Male Taper Adaptor 28mm x 1", 4243G.35X1: End Feed Male Taper Adaptor 35mm x 1", 4243G.35X1.1/4: End Feed Male Taper Adaptor 35mm x 1 ¼”, 4243G.42X1.1/2: End Feed Male Taper Adaptor 42mm x 1 ½”, 4243G.54X2: End Feed Male Taper Adaptor 54mm x 2", 4270G.15X1/2: End Feed Female Adaptor 15mm x ½”. 4270G.15X3/8: End Feed Female Adaptor 15mm x ⅜”, 4270G.15X3/4: End Feed Female Adaptor 15mm x ¾”, 4270G.22X1/2: End Feed Female Adaptor 22mm x ½”, 4270G.22X3/4: End Feed Female Adaptor 22mm x ¾”, 4270G.22X1: End Feed Female Adaptor 22mm x 1", 4270G.28X1: End Feed Female Adaptor 28mm x 1", 4270G.35X1: End Feed Female Adaptor 35mm x 1", 4270G.35X1.1/4: End Feed Female Adaptor 35mm x 1 ¼”, 4270G.42X1.1/2: End Feed Female Adaptor 42mm x 1 ½”, 4270G.54X2: End Feed Female Adaptor 54mm x 2". Copper body/Bronze pipe socket fittings: 4341G.15X1/2: End Feed Male Union 15mm x ½”, 4341G.22X3/4: End Feed Male Union 22mm x ¾”, 4341G.28X1: End Feed Male Union 28mm x 1", 4341G.35X1.1/4: End Feed Male Union 35mm x 1 ¼”, 4341G.42X1.1/2: End Feed Male Union 42mm x 1 ½”, 4341G.54X2: End Feed Male Union 54mm x 2". Copper fittings: 5040.1: End Feed 45 Deg Street Elbow 10mm, 5040.12: End Feed 45 Deg Street Elbow 12mm, 5040.15: End Feed 45 Deg Street Elbow 15mm, 5040.22: End Feed 45 Deg Street Elbow 22mm, 5040.28: End Feed 45 Deg Street Elbow 28mm, 5040.35: End Feed 45 Deg Street Elbow 35mm, 5040.42: End Feed 45 Deg Street Elbow 42mm, 5040.54: End Feed 45 Deg Street Elbow 54mm. 5041.12: End Feed 45 Deg Elbow 12mm, 5041.15: End Feed 45 Deg Elbow 15mm, 5041.22: End Feed 45 Deg Elbow 22mm, 5041.28: End Feed 45 Deg Elbow 28mm, 5041.35: End Feed 45 Deg Elbow 35mm, 5041.42: End Feed 45 Deg Elbow 42mm, 5041.54: End Feed 45 Deg Elbow 54mm. 5085.15: End Feed Full Crossover 15mm, 5085.22: End Feed Full Crossover 22mm. 5086.15: End Feed Part Crossover 15mm, 5086.22: End Feed Part Crossover 22mm. 5090.08: End Feed Equal Elbow 8mm, 5090.10: End Feed Equal Elbow 10mm, 5090.12: End Feed Equal Elbow 12mm, 5090.15: End Feed Equal Elbow 15mm, 5090.22: End Feed Equal Elbow 22mm, 5090.28: End Feed Equal Elbow 28mm, 5090.35: End Feed Equal Elbow 35mm, 5090.42: End Feed Equal Elbow 42mm, 5090.54: End Feed Equal Elbow 54mm. 5092.10: End Feed Street Elbow 10mm, 5092.15: End Feed Street Elbow 15mm, 5092.22: End Feed Street Elbow 22mm, 5092.28: End Feed Street Elbow 28mm, 5092.35: End Feed Street Elbow 35mm, 5092.42: End Feed Street Elbow 42mm, 5092.54: End Feed Street Elbow 54mm. 5130.08: End Feed Equal Tee 8mm, 5130.10: End Feed Equal Tee 10mm, 5130.12: End Feed Equal Tee 12mm, 5130.15: End Feed Equal Tee 15mm, 5130.22: End Feed Equal Tee 22mm, 5130.28: End Feed Equal Tee 28mm, 5130.35: End Feed Equal Tee 35mm, 5130.42: End Feed Equal Tee 42mm, 5130.54: End Feed Equal Tee 54mm. 5130R.152215: End Feed Reduced Both Ends 15 x 22 x 15mm, 5130R.222822: End Feed Reduced Both Ends 22 x 28 x 22mm, 5130R.283528: End Feed Reduced Both Ends 28 x 35 x 28mm, 5130R.151212: End Feed Reduced Branch and End Tee 15 x 12 x 12mm, 5130R.221515: End Feed Reduced Branch and End Tee 22 x 15 x 15mm, 5130R.281515: End Feed Reduced Branch and End Tee 28 x 15 x 15mm, 5130R.281522: End Feed Reduced Branch and End Tee 28 x 22 x 15mm, 5130R.282215: End Feed Reduced Branch and End Tee 28 x 15 x 22mm, 5130R.282222: End Feed Reduced Branch and End Tee 28 x 22 x 22mm, 5130R.352222: End Feed Reduced Branch and End Tee 35 x 22 x 22mm, 5130R.352828: End Feed Reduced Branch and End Tee 35 x 28 x 28mm, 5130R.423535: End Feed Reduced Branch and End Tee 42 x 35 x 35mm, 5130R.544242: End Feed Reduced Branch and End Tee 54 x 42 x 42mm, 5130R.121012: End Feed Reduced Branch Tee 12 x 10 x 12mm, 5130R.151015: End Feed Reduced Branch Tee 15 x 15 x 10mm, 5130R.151215: End Feed Reduced Branch Tee 15 x 15 x 12mm, 5130R.221022: End Feed Reduced Branch Tee 22 x 10 x 22mm, 5130R.221522: End Feed Reduced Branch Tee 22 x 15 x 22mm, 5130R.281528: End Feed Reduced Branch Tee 28 x 15 x 28mm, 5130R.282228: End Feed Reduced Branch Tee 28 x 22 x 28mm, 5130R.351535: End Feed Reduced Branch Tee 35 x 15 x 35mm, 5130R.352235: End Feed Reduced Branch Tee 35 x 22 x 35mm, 5130R.352835: End Feed Reduced Branch Tee 35 x 28 x 35mm, 5130R.421542: End Feed Reduced Branch Tee 42 x 15 x 42mm, 5130R.422242: End Feed Reduced Branch Tee 42 x 22 x 42mm, 5130R.422842: End Feed Reduced Branch Tee 42 x 28 x 42mm, 5130R.423542: End Feed Reduced Branch Tee 42 x 35 x 42mm, 5130R.541554: End Feed Reduced Branch Tee 54 x 15 x 54mm, 5130R.542254: End Feed Reduced Branch Tee 54 x 22 x 54mm, 5130R.542854: End Feed Reduced Branch Tee 54 x 28 x 54mm, 5130R.543554: End Feed Reduced Branch Tee 54 x 35 x 54mm, 5130R.544254: End Feed Reduced Branch Tee 54 x 42 x 54mm, 5130R.121210: End Feed Reduced End Tee 12 x 10 x 12mm, 5130R.151510: End Feed Reduced End Tee 15 x 10 x 15mm, 5130R.222215: End Feed Reduced End Tee 22 x 15 x 22mm, 5130R.282815: End Feed Reduced End Tee 28 x 15 x 28mm, 5130R.282822: End Feed Reduced End Tee 28 x 22 x 28mm, 5130R.353515: End Feed Reduced End Tee 35 x 15 x 35mm, 5130R.353522: End Feed Reduced End Tee 35 x 22 x 35mm, 5130R.353528: End Feed Reduced End Tee 35 x 28 x 35mm, 5130R.424235: End Feed Reduced End Tee 42 x 35 x 42mm, 5130R.545442: End Feed Reduced End Tee 54 x 42 x 54mm. 5240.1008: End Feed Reducing Coupling 10 x 8mm, 5240.1508: End Feed Reducing Coupling 15 x 8mm, 5240.1510: End Feed Reducing Coupling 15 x 10mm, 5240.1512: End Feed Reducing Coupling 15 x 12mm, 5240.2215: End Feed Reducing Coupling 22 x 15mm, 5240.2815: End Feed Reducing Coupling 28 x 15mm, 5240.2822: End Feed Reducing Coupling 28 x 22mm, 5240.3522: End Feed Reducing Coupling 35 x 22mm, 5240.3528: End Feed Reducing Coupling 35 x 28mm, 5240.4222: End Feed Reducing Coupling 42 x 22mm, 5240.4228: End Feed Reducing Coupling 42 x 28mm, 5240.4235: End Feed Reducing Coupling 42 x 35mm, 5240.5422: End Feed Reducing Coupling 54 x 22mm, 5240.5428: End Feed Reducing Coupling 54 x 28mm, 5240.5435: End Feed Reducing Coupling 54 x 35mm, 5240.5442: End Feed Reducing Coupling 54 x 42mm. 5243.1008: End Feed Fitting Reducer 10 x 8mm, 5243.1210: End Feed Fitting Reducer 12 x 10mm, 5243.1508: End Feed Fitting Reducer 15 x 8mm, 5243.1510: End Feed Fitting Reducer 15 x 10mm, 5243.1512: End Feed Fitting Reducer 15 x 12mm, 5243.2212: End Feed Fitting Reducer 22 x 12mm, 5243.2215: End Feed Fitting Reducer 22 x 15mm, 5243.2812: End Feed Fitting Reducer 28 x 12mm, 5243.2815: End Feed Fitting Reducer 28 x 15mm, 5243.2822: End Feed Fitting Reducer 28 x 22mm, 5243.3515: End Feed Fitting Reducer 35 x 15mm, 5243.3522: End Feed Fitting Reducer 35 x 22mm, 5243.3528: End Feed Fitting Reducer 35 x 28mm, 5243.4215: End Feed Fitting Reducer 42 x 15mm, 5243.4222: End Feed Fitting Reducer 42 x 22mm, 5243.4228: End Feed Fitting Reducer 42 x 28mm, 5243.4235: End Feed Fitting Reducer 42 x 35mm, 5243.5415: End Feed Fitting Reducer 54 x 15mm, 5243.5422: End Feed Fitting Reducer 54 x 22mm, 5243.5428: End Feed Fitting Reducer 54 x 28mm, 5243.5435: End Feed Fitting Reducer 54 x 35mm, 5243.5442: End Feed Fitting Reducer 54 x 42mm. 5270.08: End Feed Straight Coupling 8mm, 5270.10: End Feed Straight Coupling 10mm, 5270.12: End Feed Straight Coupling 12mm, 5270.15: End Feed Straight Coupling 15mm, 5270.22: End Feed Straight Coupling 22mm, 5270.28: End Feed Straight Coupling 28mm, 5270.35: End Feed Straight Coupling 35mm, 5270.42: End Feed Straight Coupling 42mm, 5270.54: End Feed Straight Coupling 54mm. 5301.08: End Feed Stop End 8mm, 5301.10: End Feed Stop End 10mm, 5301.12: End Feed Stop End 12mm, 5301.15: End Feed Stop End 15mm, 5301.22: End Feed Stop End 22mm, 5301.28: End Feed Stop End 28mm, 5301.35: End Feed Stop End 35mm, 5301.42: End Feed Stop End 42mm, 5301.54: End Feed Stop End 54mm. C803SFEF.1: End Feed Bent Tap Connector 15mm x ½”, C803SFEF.2: End Feed Bent Tap Connector 22mm x ¾”. C805SCEF.4: End Feed Bent Cylinder Union 22mm x 1". C901EF.245: End Feed Metric Imperial Coupling 15mm x ½”, C901EF.25: End Feed Metric Imperial Coupling 22mm x ¾”, C901EF.26: End Feed Metric Imperial Coupling 28mm x 1", C901EF.27: End Feed Metric Imperial Coupling 35mm x 1 ¼”. C903SFEF.1: End Feed Straight Tap Connector 15mm x ½”, C903SFEF.2: End Feed Straight Tap Connector 15mm x ¾”, C903SFEF.3: End Feed Straight Tap Connector 22mm x ¾”. C904LEF.17: End Feed Long Fitting Reducer 15 x 8mm, C904LEF.18: End Feed Long Fitting Reducer 15 x 10mm. C905SCEF.4: End Feed Straight Cylinder Union 22mm x 1", C905SCEF.5: End Feed Straight Cylinder Union 28mm x 1". C906EF.05: End Feed Slip Coupling 15mm, C906EF.08: End Feed Slip Coupling 22mm, C906EF.09: End Feed Slip Coupling 28mm, C906EF.10: End Feed Slip Coupling 35mm. P803WPEF.2: End Feed Wallplate Elbow 15mm x ½”, P803WPEF.5: End Feed Wallplate Elbow 22mm x ¾”. Brass fittings: FA.1512: End Feed Female Adaptor 15mm x ½”, FA.2234: End Feed Female Adaptor 22mm x ¾”, FA.281: End Feed Female Adaptor 28mm x 1".

Product Images

Approval Holder:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Range of tap outlets with plastic bodies incorporating a filter within the body with a hollow fibre filter membrane The filters are supplied with (and must be used with) a chrome plated brass adapter which incorporates a plastic flow regulator. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2212320

Note:

Claims made by the manufacturer of performance have not been assessed and are not part of this approval

Size:

Please refer to model.

Marking:

T Safe logo, data matrix code, Model No and other tech info on body.

Installation Requirements:

R001 R040

Expiry date:

31/12/2027

Model:

02-831200 Medical Tap Filter 92 Day, Standard Flow (19.33mm pushfit). 02-831201/02-831201CE Medical Tap Filter 92 Day, Laminar Flow (19.29mm pushfit). 02-831202 Medical Tap Filter 31 Day, Standard Flow (19.08mm pushfit). 02-831203/02-831203CE Medical Tap Filter 31 Day, Laminar Flow (19.34mm pushfit). 02-831204 Medical Tap Filter 92 Day, Standard Flow, Sterile Packed (19.33mm pushfit). 02-831205 Medical Tap Filter 92 Day, Laminar Flow, Sterile Packed (19.29mm pushfit). 02-831206 Medical Tap Filter 31 Day, Standard Flow, Sterile Packed (19.08mm pushfit). 02-831207 Medical Tap Filter 31 Day, Laminar Flow, Sterile Packed (19.34mm pushfit). Models added August 2024: 02-831210 Medical Tap Filter Side Mount 62 day LF (19.29mm pushfit). 02-831212 Medical Tap Filter Side Mount 62 day SF (19.33mm pushfit).

Product Images

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Manufacturer:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Range of high and low pressure diaphragm float operated valves with brass body & brass drop arm lever. The valves discharge from an up and over arrangement. Maximum working pressure 14.0 bar (model 1FVB004) or 3.0 bar (model FVB104). For cold water use only.

Section:

2080 Valves

Section Subtitle:

Float operated, diaphragm, metal.

WRAS Approval Number:

2012022

Size:

½” BSP Male.

Marking:

IDC - E logo. & BS1212/2 on body.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

1FVB004 & 1FVB104.

Product Images

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co. Ltd.

Company Name

IDC Fluid Control Co. Ltd.

Address

3RD FLOOR UNIT 2 SECTION A

Country

ZHAOWEI SCIENCE & TECNOLOGY

General Email

View All Listings by this Company

Range of high and low pressure diaphragm float operated valves with brass body and backnuts. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Cold water use only.

Section:

2080 Valves

Section Subtitle:

Float operated, diaphragm, metal.

WRAS Approval Number:

2207331

Note:

For use with floats complying with BS 2456, not supplied.

Size:

½”, ¾” or 1” BSP(M)

Marking:

V&G, WRAS, date of manufacture MM/YY on body. All models marked with BS1212/2.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

20.21212.G15.CP5R-8510 1/2" PT2 Float Ball Valve HP 10 bar 20.21222.G15.CP10-8510 1/2" PT2 Float Ball Valve HP 10 bar 20.21112.G15.CP5R-8510 1/2" PT2 Float Ball Valve HP 10 bar 20.21122.G15.CP5R-8510 1/2" PT2 Float Ball Valve HP 10 bar 20.22112.G15.CP5R-8510 1/2" PT2 Float Ball Valve LP 8 bar 20.22122.G15.CP5R-8510 1/2" PT2 Float Ball Valve LP 8 bar 20.21222.G20.CP5R-8510 3/4" PT2 Float Ball Valve HP 10 bar 20.21222.G20.CP10-8510 3/4" PT2 Float Ball Valve HP 10 bar 20.21122.G20.CP5R-8510 3/4" PT2 Float Ball Valve HP 10 bar 20.22222.G20.CP10-8510 3/4" PT2 Float Ball Valve LP 8 bar 20.22122.G20.CP5R-8510 3/4" PT2 Float Ball Valve LP 8 bar 20.23222.G15.CP10-8510 1/2" PT2 Float BALL Valve-Bottom Entry ( Metal face) 10 bar

Approval Holder:

Zhejiang Valogin Technology Co. Ltd.

Company Name

Zhejiang Valogin Technology Co. Ltd.

Address

Qinggang Technological Ind. Zone, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Valogin Technology Co. Ltd.

Company Name

Zhejiang Valogin Technology Co. Ltd.

Address

Qinggang Technological Ind. Zone, Yuhuan, Zhejiang

Country

China

View All Listings by this Company