Bliss UK Group Ltd Approvals


#2112069

Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, for above ground use only.
WRAS Approval Number:
2112069
Size:
22mm Capillary
Marking:
PB logo and size on body, date of manufacture.
Installation Requirements:
R001 R511
Expiry date:
31/12/2026
Model:
10.1236

Approval Holder:
Bliss UK Group Ltd
Company Name
Bliss UK Group Ltd
Address
Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire
Postcode
MK43 8TS
Phone
01234 860230
General Email
accounts@blissukgroup.co.uk

View All Listings by this Company

Print This Approval


#2112376

Range of straight, angled, tee and Y shaped isolation valves incorporating brass bodies, NBR ‘O’-rings or PTFE seats depending on model variant. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2112376
Size:
see models
Marking:
PB logo, size and date of manufacture on body:
Installation Requirements:
R001
Expiry date:
31/12/2026
Model:
15mm x 15mm compression models: 10.1234 10.1237 15mm compression x ¾” BSP (M) models: 10.1253 EPH_WAS20_0027 (angled valve) 15mm compression x ¾” BSP(M) x 15mm compression models: 10.1255

Approval Holder:
Bliss UK Group Ltd
Company Name
Bliss UK Group Ltd
Address
Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire
Postcode
MK43 8TS
Phone
01234 860230
General Email
accounts@blissukgroup.co.uk

View All Listings by this Company

Print This Approval


#2306096

Range of single and dual flush WC outlet valves. The valves incorporate an internal overflow and are operated with one push button (single flush) or two push buttons (dual flush). Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2306096
Size:
10.1283 - 1 1/2" or 2" BSP (M).
Marking:
Plumb Bliss & PB logo on body
Installation Requirements:
R001 R571 R581
Expiry date:
30/06/2028
Model:
10.1283 Dual Flush Valve

Approval Holder:
Bliss UK Group Ltd
Company Name
Bliss UK Group Ltd
Address
Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire
Postcode
MK43 8TS
Phone
01234 860230
General Email
accounts@blissukgroup.co.uk

View All Listings by this Company

Print This Approval


#2110151

Range of BS1212-4 (2016) compact type float operated valves for WC flushing cisterns, bottom or side entry type. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2110151
Size:
1/2” BSP (M)
Marking:
Plumb Bliss, logo & WRAS & BS1212-4 on cap
Installation Requirements:
R001 R550 R560
Expiry date:
31/10/2026
Model:
10.1282 (Side entry) 10.1259 (Bottom entry)

Approval Holder:
Bliss UK Group Ltd
Company Name
Bliss UK Group Ltd
Address
Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire
Postcode
MK43 8TS
Phone
01234 860230
General Email
accounts@blissukgroup.co.uk

View All Listings by this Company

Print This Approval


#241002723

In-line electrolytic scale reducer with chromium plated copper body for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression inlet/outlet
Marking:
PLUMB BLISS & PB logo on body
Installation Requirements:
R001 R150 R170 R290
Expiry date:
31/10/2029
Model:
10.1246 Scale Inhibitor

Approval Holder:
Bliss UK Group Ltd
Company Name
Bliss UK Group Ltd
Address
Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire
Postcode
MK43 8TS
Phone
01234 860230
General Email
accounts@blissukgroup.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.