Bottom entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns with a plastic body and adjustable float and a plastic flow regulator at the inlet. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

2012121

Size:

½” BSP (M)

Marking:

Plumb Bliss, logo & company website on side of float & BS1212-4 on cap

Installation Requirements:

R001 R550 R560

Expiry date:

31/12/2025

Model:

10.1258

Approval Holder:

Bliss UK Group Ltd

Company Name

Bliss UK Group Ltd

Address

Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire

Postcode

MK43 8TS

Phone

01234 860230

General Email

accounts@blissukgroup.co.uk

View All Listings by this Company

‘AF’ range of compression fittings with brass or chrome plated brass bodies for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum working temperature 85˚C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2204110

Size:

see model

Marking:

Plumb Bliss logo (PB), Size & month/year of manufacture on fitting body

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

10.1272 Plumb Bliss Compression Coupler Male 15mm x 1/2" 10.1273 Plumb Bliss Compression Coupler Male 15mm x 3/4" 10.1274 Plumb Bliss Compression Coupler Male 22mm x 1/2" 10.1275 Plumb Bliss Compression Coupler Male 22mm x 3/4" 10.1276 Plumb Bliss Compression Coupler Female 15mm x 1/2" 10.1277 Plumb Bliss Compression Coupler Male 15mm x 3/4" 10.1278 Plumb Bliss Compression Coupler Male 22mm x 1/2" 10.1279 Plumb Bliss Compression Coupler Male 22mm x 3/4" 10.1280 Plumb Bliss Brass Compression Tee 15mm x 15mm x 1/2" 10.1281 Plumb Bliss Wall Plate Compression Elbow 15mm x 1/2"

Approval Holder:

Bliss UK Group Ltd

Company Name

Bliss UK Group Ltd

Address

Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire

Postcode

MK43 8TS

Phone

01234 860230

General Email

accounts@blissukgroup.co.uk

View All Listings by this Company

Range of WC dual flush drop valves with ABS bodies and silicone seals. The valves are operated via a two push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2311107

Size:

2” BSP (M)

Marking:

Plumb Bliss, logo & company website on bottom. WRAS & technical data on side.

Installation Requirements:

R001 R571 R580 R581

Expiry date:

30/11/2028

Model:

10.1260

Approval Holder:

Bliss UK Group Ltd

Company Name

Bliss UK Group Ltd

Address

Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire

Postcode

MK43 8TS

Phone

01234 860230

General Email

accounts@blissukgroup.co.uk

View All Listings by this Company

Range of EPDM hoses with either nylon or stainless-steel braiding, with or without a PVC sheath. Some models incorporate isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250102068

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models below

Marking:

Plumb Bliss logo, Wras and date of manufacture (YYYY).

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

SD-DD-01 (Stainless-steel braided – no sheath): Size: DN6 - F3/8, F1/2, M8X1, M8X1.25, M10X1, F15X1, M15X1. Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25, M10X1, M12X1, 15mm, 15mm valve, 22mm, 22mm valve, F15X1, M15X1. Size: DN10 - F1/2, F3/4, M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve. Size: DN13 - F1/2, F3/4, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve. SD-DD-02 (Nylon braided – no sheath) Size: DN6 - F3/8, F1/2, M8X1, M8X1.25, M10X1, F15X1, M15X1. Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25, M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve, F15X1, M15X1. SD-DD-03 (stainless-steel braided with PVC Sheath) Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25, M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve, F15X1, M15X1. SD-DD-04 (nylon braided with PVC Sheath) Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25 M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve, F15X1, M15X1

Approval Holder:

Bliss UK Group Ltd

Company Name

Bliss UK Group Ltd

Address

Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire

Postcode

MK43 8TS

Phone

01234 860230

General Email

accounts@blissukgroup.co.uk

View All Listings by this Company