‘ISR’ range of copper, DZR brass or gunmetal capillary, lead free solder ring and threaded fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum working temperatures 99°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010800

Size:

See model

Marking:

BSI Kitemark, size and Pegler logo (brand of Aalberts) on body

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

YP1 - Straight Coupling: copper x copper - 6mm - 67mm YP1 IM - Slip Adaptor Coupling: imperial copper x metric copper - ½" x 15mm - 1½" x 42mm YP1R - Reducing Straight Coupling: copper x copper 8mm x 6mm - 54mm x 42mm YP1 Slip - Slip Straight Coupling: copper x copper - 15mm, 22mm, 28mm YP2 - Straight Female Connector: copper x BSP: [Parallel Female Thread] 8mm x ¼" - 54mm x 2" YP2LC - Female reducing connector: [reduced BSP female end] - 15mm x ¼", 15mm x ⅜", 22mm x ½" YP2LI - Female reducing connector: [reduced copper end] - ¾" x 15mm YP3 - Straight male connector: [copper x BSP taper male thread] - 8mm x ¼" - 67mm x 2½" YP3LC - Male reducing connector: [reduced BSP male end] - 15mm x ¼" - 28mm x ¾" YP3LI - Male reducing connector: [reduced copper end] - 3/4" x 15mm, 1" x 22mm YP5 - Tank connector: copper x BSP [parallel male thread] - 15mm x ½" - 54mm x 2" YP5FC - Tank connector: copper x BSP [parallel male thread] - 15mm x ½", 22mm x ¾", 28mm x 1" YP6 - Reducer: [Larger end for insertion into fitting] - 8mm x 6mm - 67mm x 54mm YP7 - Female adaptor:[male copper for insertion into fitting x BSP parallel female thread] 15mm x ½" - 54mm x 2" YP8 - Male adaptor: [male copper for insertion into fitting x BSP taper male thread] - 15mm x ½" - 54mm x 2" YP9 - Adaptor: [imperial female copper x metric male copper] - ½" x 15mm - 2" x 54mm YP9B - Non-standard adaptor - ½" 17G x 15mm YP99 - Adaptor: [Metric or imperial female copper x male copper] - 15mm x ½" - 42mm x 1½" YP11 - Union Coupling: [copper x copper] - 15mm - 67mm YP12 - Elbow: [copper x copper] - 6mm - 67mm YP12R - Reducing Elbow: [copper x copper] - 22mm x 15mm, 28mm x 22mm YP12S - Street Elbow: [Female copper x Male copper] - 8mm - 42mm YP13 - Male Elbow: [copper x BSP taper male thread] - 15mm x ½" - 42mm x 1½" YP14 - Female Elbow: [copper x BSP parallel female thread] - 15mm x ½", 22mm x ¾", 28mm x 1" YP14LC - Reducing Female Elbow: [Reduced female end] - 22mm x ½" YP15 - Backplate Elbow: [copper x BSP parallel female thread] - 15mm x ½", 22mm x ¾" YP15LN - Backplate Elbow: [Extended nose and circular backplate] - 15mm x ½" YP18 - Slow Bend: [copper x copper] - 15mm, 22mm, 28mm YP20 - Return Bend: [copper x copper] - 15mm, 22mm, 28mm YP21 - Obtuse Elbow: [copper x copper] - 15mm - 67mm YP22 - Partial Crossover: [female copper x male copper] - 15mm, 22mm YP23 - Full Crossover: [copper x copper] - 15mm, 22mm YP24 - Equal Tee: [All ends for copper] - 6mm - 67mm YP24 Slip - Equal Tee, Slip pattern: [All ends for copper] - 15mm YP25 - Tee, Reduced Branch: [All ends for copper] - 22mm x 22mm x 10mm - 67mm x 67mm x 28mm YP26 - Tee, One End Reduced: [All ends for copper] - 22mm x 15mm x 22mm - 54mm x 42mm x 54mm YP27 - Tee, One End and Branch Reduced: [All ends for copper] - 22mm x 15mm x 15mm - 54mm x 42mm x 42mm YP28 - Tee, Both Ends Reduced: [All ends for copper] - 15mm x 15mm x 22mm - 35mm x 35mm x 42mm YP29 - Female Tee: [Copper end and Copper branch x reduced BSP parallel female end] - 15 x ½" x 15mm, 22 x ¾" x 22mm YP29R - Female Tee: [Copper end and Copper branch x reduced BSP parallel female end] - 22mm x ½" x 22mm, 28mm x ½" x 28mm, 35mm x ½" x 35mm YP30 - Female Tee: [Copper ends x BSP parallel female branch] - 15mm x 15mm x ½", 22mm x 22mm x ¾", 28mm x 28mm x 1" YP30BP - Backplate Tee: [Copper ends x BSP parallel female branch. Circular backplate] - 15mm x 15mm x ½" YP30R - Female Tee: [Copper ends x reduced BSP parallel female branch] 15mm x 15mm x ¼" - 42mm x 42mm x 1/2" YP37 - Sweep Tee, 90°: [All ends for copper] - 15mm, 22mm, 28mm YP37R - Sweep Tee, 90°: [Reduced branch] - 22mm x 22mm x 15mm, 28mm x 28mm x 15mm YP50 - Cross: [All ends for copper] - 15mm, 22mm YP61 - Stop End: [For use on copper tube] - 8mm - 54mm YP35 - Air Vent Tee: [YP37 Sweep Tee plus Air-Release Valve RV35] - 15mm RV35 - Air-Release Valve: [Male copper end suitable for use in any capillary socket] - 15mm YP62 - Tap Connector: [copper x BSP union nut. Spigot and washer joint] - 15mm x ½" - 22mm x ¾" YP63 - Bent Tap Connector: [copper x BSP union nut. Spigot and washer joint] - 15mm x ½" - 22mm x ¾" YP63L - Long Bent Tap Connector: [copper x BSP union nut. Spigot and washer joint] - 15mm x ½" YP64 - Bent union adaptor: [copper x BSP union nut] - 22mm x 1", 28mm x 1¼" YP65 - Bent male union connector: [copper x BSP taper male thread] - 15mm x ½" - 42mm x 1½" YP65R - Bent Boiler union: [copper x BSP taper male thread] - 22mm x 1" YP68 - Union adaptor: [copper x BSP union nut] - 15mm x ¾", 22mm x 1", 28mm x 1¼" YP68CL - Union adaptor: [copper x BSP union nut. Spigot and fibre washer joint] - 15mm x ¾", 22mm x 1", 28mm x 1¼" YP68CLDZR - Union adaptor: [copper x BSP union nut. Spigot and fibre washer joint] with DZR nuts - 15mm x ¾" YP68FF - Flat Faced Union adaptor: [copper x BSP union nut] Suitable for use with water meters. - 15mm x ¾", 22mm x 1" YP68M - Meter union connector: [copper x BSP union nut] Suitable for use with water meters. - 22mm x ¾" YP69 - Straight male union connector: [copper x BSP taper male thread] - 15mm x ½" - 54mm x 2" YP69DP - Straight male union connector: with 104mm dip pipe. - 22mm x ¾" YP69F - Straight female union connector: [copper x BSP parallel female thread] - 15mm x ½" - 54mm x 2" YP69P - Straight male union connector: [copper x BSP parallel male thread] - 15mm x ½", 22mm x ¾", 28mm x 1", 67mm x 2½" YP70 - Male nipple: [union thread x BSP taper male thread] - ½" x ⅜", ¾" x ½", 1" x ¾", 1¼" x 1" YP70P - Male nipple: [union thread x BSP taper male thread] For use with YP64 and YP68 - ¾" x ½", 1" x ¾" YP71 - Male nipple: [union thread x BSP taper male thread] equal ends. - ½" , ¾", 1" YP72 - Female nipple: [union thread x BSP parallel female thread] - ¾" x ½" - 2½" x 2" YP115 - Extension nipple: [Used to give extra length to female ends on YP14, YP15, YP30] - ½" - ¾"

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of gate valves with DZR brass bodies and brass wedge. Valves are operated via a non-rising spindle headwork. Maximum operating pressure 20.0 Bar. Maximum operating temperature 100°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

2102800

Size:

See model

Marking:

Pegler England (brand of Aalberts) , size, PN & BR on body.

Installation Requirements:

R001

Expiry date:

28/02/2026

Model:

½” – 4” 1068 BS 5154 PN20 full way gate valve with handwheel. 203007, 203008, 203009, 203010, 203011, 203013, 203014 & 203015 ½” – 2” 1068LS BS 5154 PN20 full way gate valve with lockshield. 203067, 203068, 203069, 203070, 203071, 203072

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Manufacturer:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of latching and non-latching normally closed solenoid valves with either brass or stainless-steel bodies. Please refer to model for maximum working pressure. Maximum operating temperature 85°C.

Section:

2230 Valves

Section Subtitle:

Solenoid, metal.

WRAS Approval Number:

2007078

Size:

See model

Marking:

PEGLER (brand of Aalberts) & PRODUCT INFORMATION ON BODY

Installation Requirements:

R001

Expiry date:

31/07/2025

Model:

12900, 12901, 12902, 12903, 12904, 12905, 12906, 12907, 12908, 12910, 12911, 12912, 12913, 12914, 12915, 12916 & 12917 SOLENOID VALVES Maximum working pressure 16.0 bar: 1/2’’ BSP (F) (12900, 12901, 12902) Maximum working pressure 12.0 bar: 3/4’’ BSP (F) (12903, 12904, 12905) 1’’ BSP (F) (12906, 12907, 12908) Maximum working pressure 10.0 bar: 1 1/4’’ BSP (F) (12909, 12910, 12911) 1 1/2’’ BSP (F) (12912, 12913, 12914) 2’’ BSP (F) (12915, 12916, 12917)

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of gate valves (gunmetal) with gunmetal bronze wedges, brass spindle and PTFE seals. Maximum working pressure 20.0 bar. Maximum operating temperature 100°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

2101801

Size:

1070/125 Taper Thread (½” female BSP inlet/outlet - 4” female BSP inlet/outlet) 1070/125PT Parallel Tread (½” female BSP inlet/outlet - 4” female BSP inlet/outlet) 1070/125 lockshield (½” female BSP inlet/outlet - 2” female BSP inlet/outlet).

Marking:

Pegler England (brand of Aalberts) on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

1070/125 Product Codes = 103007, 103008,103009,103010, 103011, 103012, 103013, 103014, 103015. 1070/125PT Product Codes = 103047, 103048, 103049, 103050, 103051, 103052, 103053, 103054, 103055. 1070/125 Lockshield Product Codes = 103057, 103058, 103059, 103060, 103061, 103062.

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of copper solder ring fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2006367

Size:

8mm – 54mm 3/8” – 2”

Marking:

YP (trademark of Pegler/ brand of Aalberts) on fitting body

Installation Requirements:

R001

Expiry date:

30/06/2025

Model:

YPS12 15 Elbow YPS12 22 Elbow YPS1 15 Coupling YPS1 22 Coupling YPS24 15 Tee YPS6 22X15 Reducer YPS24 22 Tee YPS25 22X22X15 Tee Red Branch YPS12S 15 Street Elbow YP12 28 Elbow YP26 22X15X22 Tee Red End YP6 15X10 Reducer YP6 28X22 Reducer YP1 28 Coupling YP12S 22 Street Elbow YP12 10 Elbow YP27 22X15X15 Tee Red End/Bran YP1 10 Coupling YP1 8 Coupling YP1R 22X15 Red Coupling YP21 15 Obtuse Elbow YP24 28 Equal Tee YP12 8 Elbow YP1IM SLIP 3/4X22 Adaptor YP21 22 Obtuse Elbow YP6 15X8 Reducer YP21 28 Obtuse Elbow YP6 28X15 Reducer YP25 28X28X22 Tee Red Branch YP25 28X28X15 Tee Red Branch YP24 10 Equal Tee Brass YP1R 28X22 Red Coupling YP28 15X15X22 Tee Red Ends YP68 22X1 St Union Adaptor YP24 8 Equal Tee Brass YP27 28X22X22 Tee Red End/Branch YP26 28X22X28 Tee Red End YP64 22X1 Bent Union Adaptor YP1IM SLIP 1X28 Adaptor YP12S 28 Street Elbow YP1IM SLIP 1/2X15 Adaptor YP61 15 Stop End YPS62 15X1/2 St Tap Connector YP61 22 Stop End YP12 35 Elbow YP63 15X1/2 Bent Tap Connector YP1 35 Coupling YP6 35X28 Reducer YP62 22X3/4 St Tap Connector YP62 15X3/4 St Tap Connector YP12 54 Elbow YP12 42 Elbow YP26 28X15X28 Tee Red End YP6 35X22 Reducer YP21 35 Obtuse Elbow YP61 10 Stop End YP1SLIP 22 Slip Coupling YP6 35X15 Reducer YP1 42 Coupling YP6 10X8 Reducer YP24 35 Equal Tee YP1SLIP 15 Slip Coupling YP1 54 Coupling YP24 42 Equal Tee YP25 35X35X15 Tee Red Branch YP21 42 Obtuse Elbow YP24 54 Equal Tee YP61 8 Stop End YP25 35X35X22 Tee Red Branch YP1R 15X10 Red Coupling YP6 42X35 Reducer YP6 42X28 Reducer YP21 54 Obtuse Elbow YP6 54X42 Reducer YP25 42X42X15 Tee Red Branch YP25 54X54X22 Tee Red Branch YP1R 15X8 Red Coupling YP25 42X42X28 Tee Red Branch YP6 54X28 Reducer YP25 35X35X28 Tee Red Branch YP25 54X54X15 Tee Red Branch YP6 42X15 Reducer YP25 42X42X22 Tee Red Branch YP6 42X22 Reducer YP6 54X35 Reducer YP6 54X15 Reducer YP6 54X22 Reducer YP25 54X54X28 Tee Red Branch YP25 54X54X42 Tee Red Branch YP27 28X22X15 Tee Red End/Branch YP25 42X42X35 Tee Red Branch YP1R 10X8 Red Coupling YP25 54X54X35 Tee Red Branch YP28 15X15X28 Tee Red Ends YP28 22X22X28 Tee Red Ends YP27 28X15X15 Tee Red End/Branch YP27 28X15X22 Tee Red End/Branch YP1SLIP 28 Slip Coupling All fittings are for use with copper pipe to EN 1057.

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company