Single hole, single outlet (swivel) combination tap assembly (stainless steel body - various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator with an integral flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110365

Expiry date:

31/10/2026

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

QTOO (brand of D Line) on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

QT1200xxx Tall single hole mixer. Model added June 2022 QT2100xxx Where xxx denotes the finish and can be replaced by 1 to 3 digits: M = brushed stainless steel finish. PP1 = polished PVD gunmetal finish.

Factor:

D Line

Company Name

D Line

Address

Roskildevej 22 2620 Albertslund

Phone

+4572170138

General Email

service@dline.com

View All Listings by this Company

Premix control unit for an infrared sensor tap comprising of a solenoid valve with plastic body, EPDM diaphragm and ‘O’-rings, and silicone seals. Both the cold and hot inlets incorporate an approved single check valve cartridge, however the complete assembly has not been tested for backflow protection. The central section of the valve incorporates a plastic strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

2209328

Expiry date:

30/09/2027

Size:

½” BSP (M).

Marking:

QTOO (brand of D Line) on outer casing

Installation Requirements:

R001 R008 R010

Model:

QSF01

Factor:

D Line

Company Name

D Line

Address

Roskildevej 22 2620 Albertslund

Phone

+4572170138

General Email

service@dline.com

View All Listings by this Company

Range of wall mounted, concealed, manual blending valves with a brass body incorporating a ceramic cartridge headwork with a single lever operating member. The QS3200 model also incorporates a manual diverter with a single lever operating member. The QS3400 model is a stainless steel bodied spout conector to be used in conjunction with the QS3100 and QS3200 concealed valves. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

2000 Valves

Section Subtitle:

Blending, manually operated.

WRAS Approval Number:

2110306

Expiry date:

31/10/2026

Note:

This approval does not include a spout outlet, shower outlet or overhead shower. The QS3400 (spout connector) is not approved in its own right.

Size:

½” BSP (F).

Marking:

QTOO (brand of D Line) on operating member.

Installation Requirements:

R001 R010 R040

Model:

QT3100 (single outlet). QS3400 (spout connector) which must be used in conjunction with the following concealed valves: QS3100 (single outlet). QS3200 (two outlet).

Factor:

D Line

Company Name

D Line

Address

Roskildevej 22 2620 Albertslund

Phone

+4572170138

General Email

service@dline.com

View All Listings by this Company