Combined bath filler and overflow with a brass body and metal trim (various finishes). The outlet incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a click type waste. Maximum operating temperature 85°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2009026

Expiry date:

30/09/2025

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

Coalbrook (brand of Davroc) logo on the underside of the bath filler/overflow trim piece.

Installation Requirements:

R001 R576

Model:

XX5000YY XX represents the branding, which can be replaced with: CO = Coalbrook. YY denotes the finish, which can be replaced with: BN = Brushed Nickel. CP = Chrome. GN = Gunmetal. SB = Stable Brass.

Factor:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

View All Listings by this Company

Range of wall mounted bar type thermostatic shower mixers with brass bodies (various finishes), incorporating a ceramic disc headwork which controls and diverts the flow to a hand shower or overhead shower using a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member with a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products are supplied with an overhead shower, shower hose and shower handset. Maximum working pressure: 5.0 Bar. Maximum operating temperature: 60ºC.

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2203024

Expiry date:

31/03/2027

Size:

½” x ¾” BSP offset unions

Marking:

Coalbrook logo on bottom of body.

Installation Requirements:

R001 R010 R040

Model:

Typical product code - XX 3000 YY XX denotes name of trim and can be replaced with: DO – Domo Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN - Brushed Nickel CP - Chrome GM - Gunmetal SB - Stable Brass BB - Brushed Brass

Factor:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork and a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2203029

Expiry date:

31/03/2027

Size:

PET braided TpSiv lined flexible hose assemblies incorporating ½” BSP captive nuts end connections.

Marking:

Coalbrook logo on base of body

Installation Requirements:

R001 R006 R009 R010

Model:

XX 6000 YY XX denotes the trim and can be replaced with: DO = Domo Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass BB = Brushed Brass

Factor:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

View All Listings by this Company

Range of wall mounted spout outlets (brass bodies, various finishes) incorporating a plastic aerator. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlets.

WRAS Approval Number:

2201036

Expiry date:

31/01/2027

Note:

Open outlet use only

Size:

¾” BSP (F)

Marking:

Coalbrook logo (brand of Davroc) on underside of spout.

Installation Requirements:

R001 R040

Model:

XX 2003 YY Understanding the product code: XX: Replaced with letters representing the name of the trim. The number of letters will depend on the name of the trim. Examples are: DO which represents the name 'Domo' and BA which represents 'Bank'. 2003: model range. YY: Replaced with letters representing the colour/plating options available. The number of letters will depend on the name of the finish. Examples are: BB - Brushed Brass, BN - Brushed Nickel, CP - Chrome, GM - Gunmetal, SB - Stable Brass.

Factor:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

View All Listings by this Company

Shower kit consisting of shower handset, EPDM lined shower hose, wall outlet and riser rail, available in various finishes (see model). Maximum operating temperature 85.0°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2211037

Expiry date:

30/11/2027

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

Coalbrook logo (brand of Davroc) on rear of Handset and Wall Outlet.

Installation Requirements:

R001 R040

Model:

XX4012YY. Where XX denotes the trim and can be replaced with: CO – Coalbrook. Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel, CP = Chrome, GM = Gunmetal, SB = Stable Brass, BB = Brushed Brass.

Factor:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

View All Listings by this Company