Thomas Dudley Limited Approvals


#1912912

"Coalbrook" concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry or bottom entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush pneumatic outlet valve. The full flush can be set at 4, 5 or 6 litres and the reduced flush can be set at 2.6, 3 or 4 litres. Maximum operating pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
1912912
Expiry date:
31/12/2024
Size:
½” inlet / 2” Outlet
Marking:
Dudley & thomasdudley.co.uk moulded on inside of lid. Water level mark on inside of cistern.
Installation Requirements:
R001 R280 R556
Model:
Coalbrook Concealed WC Cistern
Factor:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000

View All Listings by this Company

Print This Approval


#2301909

'Dudley Niagara` range of pneumatically operated single and dual flush drop valves. The flush assembly of the dual flush valve is adjustable to give different flush volumes. The valves are operated via a remote button connected by a plastic tube and incorporates an internal overflow. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2301909
Expiry date:
31/01/2028
Size:
2" BSP Outlet
Marking:
TD moulded on top of valve cap.
Installation Requirements:
R001 R571 R581
Model:
Dudley Niagara Pneumatic Dual and Single Flush Valves
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000

View All Listings by this Company

Print This Approval


#2212101

Range of single hole, single outlet, electronically controlled tap assemblies (chrome plated brass body). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connection hose. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212101
Expiry date:
31/12/2027
Size:
10mm spigot.
Marking:
Dudley Logo on tap body.
Installation Requirements:
R001 R006 R007
Model:
Linear Battery Linear Mains
Factor:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000
General Email
sales@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2306082

Range of single and dual flush WC outlet valves. The valves incorporate an internal overflow and are operated with one push button (single flush) or two push buttons (dual flush). Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2306082
Expiry date:
30/06/2028
Size:
Dudley Victoria Mechanical Valve - 2” BSP (M). Dudley Victoria Cable Valve - 11/2" or 2" BSP (M).
Marking:
Dudley & WRAS on top of cover
Installation Requirements:
R001 R571 R581
Model:
Dudley Victoria Mechanical Valve & Dudley Victoria Cable Valve
Factor:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000
General Email
sales@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2309073

Range of single hole, single outlet, fixed, electronically controlled tap assemblies (chrome plated brass bodies). Flow is controlled via an infra-red activated solenoid valve and the spout outlets incorporate plastic aerators. The inlets incorporate a stainless-steel filter washer. Maximum working pressure 8.0 bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2309073
Expiry date:
30/09/2028
Size:
Stainless steel braided, PEX lined hose with 3/8” BSP captive nut
Marking:
Dudley on body
Installation Requirements:
R001 R006 R009
Model:
Contemporary Battery with extended spout, Contemporary Mains Deck Mounted with Stainless Steel effect finish, Contemporary Mains Deck Mounted with Matt Black effect finish, Contemporary Mains Deck Mounted with Matt Black effect finish, 2.5LPM regulated Contemporary Mains, Contemporary Mains with extended height and spout Contemporary Battery
Factor:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000
General Email
sales@thomasdudley.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.