RELIANCE WORLDWIDE CORPORATION (UK) LTD Approvals


#2206012

Range of combined temperature and pressure relief valves incorporating DZR brass bodies, and a silicone diaphragm. The valves are pre-set at 4.5, 6.0, 7.0 or 10 bar (see models). The valves incorporate a manually operated rotational easing gear and are for use with copper pipe (EN1057) Please refer to model for maximum working pressure. Maximum operating temperature 95°C

Section:
2030 Valves
Section Subtitle:
Combined thermal and pressure relief.
WRAS Approval Number:
2206012
Size:
½” BSP (M) x 15mm Compression (Models ending 001, 005, 010, 015, 020, 030, 040, 045, 100, 110 & 115). 15mm Compression x 15mm Compression (Model ending 105 & 025). ¾” BSP (M) x 22mm Compression (Models ending 200, 205, 210 & 250)
Marking:
Reliance, EN 1490, WRAS maximum temperature, pressure and technical information on cap. DR on body.
Installation Requirements:
R001
Expiry date:
30/06/2027
Model:
4.5 bar: PTEM540015 & PTEM585200, 6.0 bar: PTEM540020 & PTEM540115 7.0 bar: PTEM540001, PTEM540010, PTEM540030, PTEM540100, PTEM540105, PTEM540025, PTEM585205 & PTEM585250 10.0 bar: PTEM540005, PTEM540110 & PTEM585210. MODELS ADDED JUNE 2024: PTEM540040 - 6.0 bar PTEM540045 - 10.0 bar
Product Images

Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2205029

Range of automatic air venting valves with DZR brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2205029
Marking:
RWC and DR mark on body.
Installation Requirements:
R001
Expiry date:
31/05/2027
Model:
ADMT503004: 15mm compression. ADMT503005: 22mm compression. ADMT503010: ¾” BSP (M).
Product Images

Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2211704

Spherical valve with a brass body and ball, PTFE seat, EPDM ‘O’-rings, a lever operating member and a drain connection outlet. Compression end connection for use with copper pipe (manufactured to BS EN 1057). The product is supplied with a brass cap and an EPDM washer which is interchangeable with the hose union spigot outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, for above ground use only.
WRAS Approval Number:
2211704
Size:
15mm compression x 15mm hose union spigot.
Marking:
RWC, size and BS EN 1254-2 on compression nut.
Installation Requirements:
R001 R511
Expiry date:
30/11/2027
Model:
BALV900003 (BALL VALVE 100C WITH DRAIN CONNECTION).

Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2210018

Range of combination valves with a DZR brass body incorporating a pressure reducing valve, a ball valve, pressure gauge and water meter port. The outlet incorporates two single check valve cartridges, verified by test suitable for backflow to fluid category 3. Maximum working pressure 16 Bar Outlet pressure in the range 6.0 to 1.5 bar. Maximum operating temperature 80°C

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2210018
Size:
Please refer to model.
Marking:
RWC, PN, DR, DN and flow arrow on body. Reliance valves, pressure and max temp on pressure reducing valve ring. RWC and flow arrow on insulation jacket.
Installation Requirements:
R001 R120
Expiry date:
31/01/2027
Model:
TVAP201001 – ¾” BSP female inlet/outlet TVAP201005 – 1” BSP female inlet/outlet
Product Images

Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2212014

Range of tank and cistern connectors, with push fittings. Models CM0715S and CM0722S are for use with copper tube (manufactured to BS EN 1057) PE-X pipe (BS7291-3) & PB pipe (BS7291-2). Until April 2023, model CM0728S was only for use with copper tube (manufactured to BS EN 1057). From May 2023, model CM0728S is also for use with PE-X pipe (BS7291-3) & PB pipe (BS7291-2). Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2212014
Size:
15mm, 22mm, 28mm - pushfit
Marking:
John Guest logo “JG” (brand of Reliance Worldwide Corporation (UK) Ltd.) and size on body.
Installation Requirements:
R001
Expiry date:
31/12/2027
Model:
CM0715S - 15mm Tank Connector. CM0722S - 22mm Tank Connector. CM0728S - 28mm Tank Connector.
Product Images

Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company
Manufacturer:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 7 of 20

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.