Zip Heaters UK Ltd T/A Zip Water UK Approvals


#240402048

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes - see model). Electronic controls on the left-hand side of the body allow the tap to dispense one or more of the following (model specification dependent): boiling, chilled or sparkling water. Ambient (hot and cold) water is controlled via a ceramic cartridge headwork with a single lever operating member. The spout incorporates a plastic aerator on the Sparkling/Chilled and the Ambient outlet, and a separate outlet for the boiling water. Both model ranges incorporate a vent outlet within the tap spout for the boiling water circuit. Maximum working pressure 5.0 bar (Ambient (hot and cold) circuit only). 95458xxx models - Boiling circuit has a maximum operating temperature of 100°C. All other circuits have a maximum operating temperature of 65°C. 95459xxx models - Boiling circuit has a maximum operating temperature of 100°C. The ambient circuit has a maximum operating temperature of 65°C. The chilled/sparkling circuit has a maximum operating temperature of 60°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
240402048
Size:
Ambient hot and cold inlets: Hot: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connection. Cold: ½” BSP (F) to tee piece installed prior to a stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connection. Boiling water: 8mm OD s/steel spigot (attached to tubing). Chilled or Chilled/sparkling water (model dependent): 8mm OD s/steel spigot (attached to tubing).
Marking:
ZIP on operating member
Installation Requirements:
R001 R006 R007 R008 R009
Expiry date:
30/04/2029
Model:
Celsius Plus All-in-one Boiling/Chilled: 95458xxx. Celsius Plus All-in-one Boiling/Chilled/Sparkling: 95459xxx. Where xxx denotes finish and can be replaced with: Z00 = Chrome, Z01 = Brushed Chrome, Z03 = Matt Black.
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Print This Approval


#241002033

Range of single hole, double outlet (swivel) combination tap assemblies (various finishes) with electronically controlled functions to allow the tap to dispense boiling water, chilled water or sparkling water from under counter units (not supplied or part of this approval) and a ceramic cartridge headwork with single lever operating member controlling the flow of normal mixed water. The spout outlet incorporates a plastic aerator. Maximum working pressure: 5.0 Bar. Maximum operating temperature: 98.0°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
241002033
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined hose assemblies with 1/2" BSP captive nut end connections (Normal Hot/Cold Water) and a Silicone flexible tube (Boiling, Chilled or Sparkling).
Marking:
Zip on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2029
Model:
96363UK HydroTap Celsius Arc (Bright Chrome), 96394UK HydroTap Celsius Arc (Brushed Chrome), 96406UK HydroTap Celsius Arc (Matt Black).
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Print This Approval


#241004721

Tudor range of above and under sink range of electrically heated vented water heaters (cased and insulated) incorporating an angle valve on the inlet for flow control. Maximum working pressure 3.5 bar. Maximum operating temperature 75°C.

Section:
1380 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
241004721
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression
Marking:
Zip Water UK, Model and product info on adhesive label
Installation Requirements:
R001 R040
Expiry date:
31/10/2029
Model:
T5UB5 Tudor Under Basin 5 Litre T5UB10 Tudor Under Basin 10 Litre T5OB5 Tudor Over Basin 5 Litre T5OB10 Tudor Over Basin 10 Litre
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company
Manufacturer:
Tiki Doo Stara Pazova
Company Name
Tiki Doo Stara Pazova
Address
Golubinacki Put 1B Stara Pazova 22300 Serbia
General Email

View All Listings by this Company

Print This Approval


#250402710

Range of installation kits comprising of a water block, double check valve assembly (suitable for backflow protection against fluid category 3) and a pressure reducing valve (outlet pressure range 3.0 to 3.5 bar). Model 95428 incorporates a water filter. Maximum working pressure: 16 Bar Maximum operating temperature: 23°C

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
250402710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see model
Marking:
Zip on water block, Zip, product info on filter
Installation Requirements:
R001 R008 R170 R290
Expiry date:
30/04/2030
Model:
95201: Chilled Install Rail (15mm spigot x ¾” BSP F) 95565: Install Rail (15mm spigot x ¾” BSP M) PRV – Art.232.991: Pressure Reducing Valve (3/4” (F) x ¾” BSP M)) 95428: Chilled InstaTap Installation Kit (15mm spigot x ¾” BSP F) 95402: InstaTap Installation Kit (15mm spigot x ¾” BSP F)

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company
Manufacturer:
Instanta Ltd
Company Name
Instanta Ltd
Address
Canning Road Southport Merseyside
Postcode
PR9 7SN
Phone
01704 501114
General Email

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 4 of 4

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.