Range of three hole, single outlet (fixed) wall mounted, concealed tap assemblies with brass bodies and chrome plated trim set. Consisting of a rough in set 45089 and extermnal trim 65090 and 65091. Incorproating a quarter turn ceramic disc headworks and single lever operating members.The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole, metal, single outlet, fixed.

WRAS Approval Number:

2112349

Expiry date:

31/12/2026

Size:

½” BSP (F)

Marking:

Gessi on operating member

Installation Requirements:

R001 R010 R040

Model:

65090+45089 65091+45089

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Phone

+39 0163 454111

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic aerator. Model 65001 and 65004 supplied with a pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2112350

Expiry date:

31/12/2026

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut with 3/8” BSP (M) adaptor.

Marking:

Gessi on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

65002 65004 Models with pop up waste: 65001 65003

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Phone

+39 0163 454111

View All Listings by this Company

Range of shower outlets and shower kits. Shower outlets consisting of wall and ceiling mounted shower heads and hand shower. The inlets incorporate stainless steel flow regulators and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower kits can consist of shower hose, shower handset, riser rail and wall outlet elbow with bracket (depending on model). Shower handset inlet incorporates a stainless-steel strainer. Both the outlet of the wall elbow and inlet of shower handset incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

WRAS Approval Number:

2201324

Expiry date:

31/01/2027

Note:

Open outlet use only. R007 only applies to model 65127

Size:

See model

Marking:

Gessi on inlet (models 65142, 65123) Gessi on operating member (model 65144) Gessi on shower head (model 65154) Gessi on shower holder (model 65127) Gessi on base plate (models 65148, 65149, 65150, 65152, 65153, 65155)

Installation Requirements:

R001 R007 R040

Model:

½” BSP (M): 65123 - shower set 65142 - sliding rail with handshower 65148 - Wall mounted overhead shower 65149 - Wall mounted overhead shower 65150 - Overhead shower 65152 - Overhead shower 65153 - Overhead shower 65154 - Handshower 65155 - Overhead shower ½” Captive nut 65144 - Complete set with sliding rail 65127 – Deck mounted handshower kit

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Phone

+39 0163 454111

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a pull-down spout with a plastic aerator, which also incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with optional ⅜” BSP (M) x ½” BSP (F) adaptors each with two fibre gaskets for installation on each inlet hose. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2112352

Expiry date:

31/12/2026

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

Gessi on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

60010, 60012, 60014.

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Phone

+39 0163 454111

View All Listings by this Company