Range of single hole, single outlet (swivel) combination tap assemblies, (chrome plated brass bodies), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304328

Expiry date:

30/04/2028

Size:

Stainless steel braided EPDM lined flexible hoses with ½”BSP (M) end connection.

Marking:

SMR on operating member.

Installation Requirements:

R001 R006 R010

Model:

ALTHIA SINGLE LEVER SWAN, ALTHIA SINGLE LEVER QUAD, GLOBE SINGLE LEVER.

Factor:

Norcros Group (Holdings) Limited T/A Abode

Company Name

Norcros Group (Holdings) Limited T/A Abode

Address

Unit L Zenith Park Whailey Road

Postcode

S75 1HT

Phone

01226 283434

General Email

pillingworth@abodedesigns.co.uk

View All Listings by this Company

Manufacturer:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

General Email

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2309329

Expiry date:

30/09/2028

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections

Marking:

SMR etched on rear of body

Installation Requirements:

R001 R006 R010

Model:

TM1 SF SWAN TM1 SF QUAD

Factor:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

View All Listings by this Company

Single hole, single outlet, (swivel) combination tap assembly, incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a pull-down hose and a plastic aerator. The inlet hoses incorporate approved check valve cartridges, however, the complete assembly has not been fully tested to it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2309333

Expiry date:

30/09/2028

Size:

Stainless steel braided EPDM lined, flexible hose with ½” BSP (M) connection.

Marking:

SMR on underside of handle

Installation Requirements:

R001 R006 R010

Model:

GENIO

Factor:

Norcros Group (Holdings) Limited T/A Abode

Company Name

Norcros Group (Holdings) Limited T/A Abode

Address

Unit L Zenith Park Whailey Road

Postcode

S75 1HT

Phone

01226 283434

General Email

pillingworth@abodedesigns.co.uk

View All Listings by this Company

Manufacturer:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

General Email

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chrome plated brass body). Incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2309334

Expiry date:

30/09/2028

Size:

Stainless steel braided EPDM lined flexible hose assembly incorporating 15mm compression end connections.

Marking:

SMR on plinth

Installation Requirements:

R001 R006 R010

Model:

Upton.

Factor:

Norcros Group (Holdings) Limited T/A Abode

Company Name

Norcros Group (Holdings) Limited T/A Abode

Address

Unit L Zenith Park Whailey Road

Postcode

S75 1HT

Phone

01226 283434

General Email

pillingworth@abodedesigns.co.uk

View All Listings by this Company

Manufacturer:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

General Email

View All Listings by this Company