Kingfisher International Products Ltd. Approvals


#1903372

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic aerator and the product is supplied with shower hose and handset. The product is supplied with metal backnuts. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
1903372
Expiry date:
31/03/2024
Size:
¾” BSP (M)
Marking:
KINGFISHER "GOOD HOME LOGO" ON REAR OF TAP BODY
Installation Requirements:
R001 R006 R020
Model:
3663602665632
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1904075

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members and a lockable diverter to the shower outlet. The spout outlet incorporates a plastic aerator and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0525 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, lockable diverter to shower outlet.
WRAS Approval Number:
1904075
Expiry date:
30/04/2024
Note:
Not supplied with shower hose and handset.
Size:
¾” x ½” BSP (M) offset unions
Marking:
COOKE & LEWIS ON REAR OF TAP BODY
Installation Requirements:
R001 R010 R040
Model:
3663602665007 E3
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1905397

Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members and self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic flow straightener and the products are supplied with a pop-up waste. Both inlets incorporate a stainless-steel strainer and a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
1905397
Expiry date:
31/05/2024
Note:
No testing on pop-up waste.
Size:
¾” x ½” BSP(M) off set union
Marking:
KINGFISHER GOOD HOME LOGO ON REAR OF TAP BODY
Installation Requirements:
R001 R030
Model:
3663602665021, 3663602665014 & 3663602665038
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1905395

Range of wall mounted two-hole, single outlet (fixed), thermostatically controlled combination tap assemblies (chrome plated brass). Flow is controlled and diverted, between the spout outlet and shower outlet, by a manual diverter. The diverter of model 3663602665083 diverter is operated by turning the spout through 90 degrees. Temperature is controlled independently via a thermostatic cartridge. The spout outlets incorporate a plastic aerator. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1905395
Expiry date:
31/05/2024
Size:
¾” to ½” BSP (M) union.
Marking:
KINGFISHER GOOD HOME LOGO ON REAR OF BODY
Installation Requirements:
R001 R020
Model:
3663602665076 & 3663602665083
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#1905396

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members and manually operated diverter to shower outlet. Inlets incorporate approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection). The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar. Maximum operating temperature 60°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
1905396
Expiry date:
31/05/2024
Note:
Shower hose and handset is not supplied as part of this approval
Size:
¾” x ½” BSP(M) offset union.
Marking:
KINGFISHER GOOD HOME LOGO ON REAR OF BODY
Installation Requirements:
R001 R020 R040
Model:
3663602664994 & 3663602664987
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 18

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.