Kingfisher International Products Ltd. Approvals


#2001138

Range of wall mounted, exposed bar type thermostatic shower blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork with a single lever operating member which controls the flow and an independent thermostatic cartridge controlling the temperature with a single lever operating member. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2001138
Expiry date:
31/01/2025
Note:
This approval does not include a shower hose or handset.
Size:
¾” X ½” offset union.
Marking:
KINGFISHER GOOD HOME LOGO ON rear of body.
Installation Requirements:
R001 R010 R040
Model:
3663602301325, 3663602320128, 3663602320067 & 3663602301769 THERMOSTATIC BLENDING VALVES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG

View All Listings by this Company

Print This Approval


#2011363

Range of brass caplillary fittings for use with EN1057 copper tube. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1115 Fittings for use with Tube and Pipe
Section Subtitle:
Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2011363
Expiry date:
30/11/2025
Size:
See model.
Marking:
Flomasta and size on body.
Installation Requirements:
R001
Model:
EPH_WSP19_1646 15mm x G1/2” Elbow. EPH_WSP19_2610 15mm x G1/2” Elbow. EPH_WSP19_2611 15mm x G1/2” Elbow. EPH_WSP19_1642 15mm x R1/2” Straight. EPH_WSP19_1645 15mm x G1/2” Straight. EPH_WSP19_1643 22mm x G3/4” Straight.
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG

View All Listings by this Company

Print This Approval


#2009547

'Flomasta Qual-PEX Pipe'. Triple layered, extruded pipe consisting of a white coloured PEX inner & outer layer and a grey coloured EVOH middle layer. For use with water up to 85°C.

Section:
5240 Polyethylene
Section Subtitle:
Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:
2009547
Expiry date:
30/09/2025
Model:
Manufacturer:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG

View All Listings by this Company

Print This Approval


#2001150

Range of single hole, single outlet (swivel) pull down spray combination tap assemblies (chromium plated brass) ceramic cartridge headworks with single lever operating members. The outlet incorporates a plastic aerator and a push button spray. stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001150
Expiry date:
31/01/2025
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
Watersmith on rear of tap body.
Installation Requirements:
R001 R006 R009 R010
Model:
8745P & 9863P COMBINATION TAP ASSEMBLIES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG

View All Listings by this Company

Print This Approval


#2104065

Two-hole, single outlet (fixed) combination tap assembly with a brass body (chromium plated), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet is a waterfall design. The inlets incorporate plastic flow restrictors. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2104065
Expiry date:
30/04/2026
Size:
¾” BSP (M)
Marking:
WATERSMITH ON FRONT OF TAP BODY
Installation Requirements:
R001 R006 R160
Model:
9514P COMBINATION TAP ASSEMBLY
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG

View All Listings by this Company

Print This Approval


#2010412

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010412
Expiry date:
31/10/2025
Size:
Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating either ½” or 3/8” captive nut end connections (see model).
Marking:
Kingfisher Goodhome Logo on body
Installation Requirements:
R001 R006 R010
Model:
3663602300823, with ½” flexible hose, Brushed Inox 3663602299707, with 3/8” flexible hose, Brushed Inox 3663602300106, with ½” flexible hose, Brushed Brass 3663602300809, with 3/8” flexible hose, Brushed Brass 3663602299745, with ½” flexible hose, Brushed Copper 3663602301288, with 3/8” flexible hose, Brushed Copper 3663602300922, with ½” flexible hose, Matt White 3663602299929, with 3/8” flexible hose, Matt White 3663602300625, with ½” flexible hose, Matt Black 3663602299905, with 3/8” flexible hose, Matt Black
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG

View All Listings by this Company

Print This Approval


#2104339

Range of stainless steel and ACB braided hoses with and EPDM liner and various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC. Hoses with plastic push fittings: maximum working pressure 6.0 bar. Maximum operating temperature 65ºC.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2104339
Expiry date:
30/04/2026
Note:
R008 applies to hoses fitted with white plastic push fittings.
Size:
See model.
Marking:
Kingfisher brand logo, WRAS & date of manufacture (YY) on ferrule
Installation Requirements:
R001 R008
Model:
FLOMASTA: hose bore=DN10, End connections= Compression fitting 10mm, pushfitting 15 (plastic), Compression fitting 15mm, 1/2" Captive Nut, 1/2" Elbow , 3/8 " Captive Nut, Compression fitting 15mm w/valve, 3/4” Captive Nut, M10X1, 1/2" BSP, 3/4" BSP, pushfitting 15, M12X1, Pipe end 15mm, 3/4" Elbow, 1/2” valve, Pushfitting 15 w/valve (plastic) FLOMASTA: hose bore=DN13, End connections= 1/2" Captive Nut, 3/4” Captive Nut, Pipe end 22mm, Pipe end 15mm, 1/2" Elbow, 3/4” Elbow, 1/2" BSP, 3/4" BSP, pushfitting 22(plastic), pushfitting 22 w/valve (plastic), Compression fitting 22mm w/valve, Compression fitting 15mm, M12X1, Pushfitting 15 (plastic), Pushfitting 15 w/valve (plastic), Compression fitting 22mm.
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG

View All Listings by this Company

Print This Approval


#2107528

'Flomasta 7619J'. Off-white coloured, PTFE paste intended for use as a thread sealant. For use with water up to 23°C.

Section:
5510 Sealants - Screwed Joints
Section Subtitle:
General.
WRAS Approval Number:
2107528
Expiry date:
31/07/2026
Manufacturer:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG

View All Listings by this Company

Print This Approval


#1910364

Range of stainless steel mini shock arrestors incorporating an EPDM membrane. Maximum working pressure 15 bar and maximum operating temperature 100°C

Section:
1000 Expansion Vessels
WRAS Approval Number:
1910364
Expiry date:
31/10/2024
Marking:
FLOMASTA, YEAR OF MANUFACTURE YYYY & other technical information on body.
Installation Requirements:
R001
Model:
VAH0368 - 5059340418568 – FLOMASTA ½” BSP(M) MINI SHOCK ARRESTOR
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG

View All Listings by this Company

Print This Approval


#2010100

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010100
Expiry date:
31/10/2025
Size:
Grey polymeric (PET) braided PE-X lined flexible hose assemblies with ½” captive nuts. Stainless steel braided PE-X lined flexible hose assemblies with ½” captive nuts.
Marking:
KINGFISHER GOOD HOME LOGO OR SWIRL ON TAP BODY
Installation Requirements:
R001 R006 R009 R010
Model:
5059340109831, 5059340109848, 5059340109855, 5059340109909, 5059340109916 & 5059340109923 COMBINATION TAP ASSEMBLIES
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 3 of 9

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.