Dolphin Solutions Ltd Approvals


#1906010

Range of single hole, single outlet (fixed) combination tap assemblies (variety of finishes) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906010
Expiry date:
30/06/2024
Size:
Stainless steel braided EPDM lined flexible hoses incorporating ½” BSP captive nut end connections.
Marking:
D & Dolphin on side of body or rear of operating member
Installation Requirements:
R001 R006 R010
Model:
DB1600xx Dolphin Blue & DB1650xx Dolphin Blue ‘xx’ denotes surface finish and can be replaced with any number between 00 & 99.
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#1911347

Range of wall mounted two hole thermostatic blending valves having brass bodies (various finishes). Incorporating a 2 way ceramic disc diverter (2 on, 1 off) flow control which also diverts the flow from a shower to shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic cartridge and dome type or lever type operating members. Inlets incorporates approved check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1911347
Expiry date:
30/11/2024
Size:
½” BSP (F)
Marking:
Dolphin logo on body.
Installation Requirements:
R001 R010 R040
Model:
DB3100.x(.xx) DB3101.x(.xx) DB3200.x(.xx) DB3201.x(.xx) Where .x denotes finish and can be replaced by: .1 - .5 to denote the finish: .1 brushed/satin polished, .2 to mirror polished, .3 brushed/satin polished with PVD coating, .4 mirror polished with PVD coating .5 powder coated. .6 - .9 other material and finish options that may be available in the future. So for example DB3100.1 is brushed/satin polished finish. The suffix (.xx),.3 to .5 are used and they will consist of numbers 00-99 to denote the colour of PVD or powder coat. So for example DB3100.3.50 is brushed/satin polished with Gold PVD coating.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#1906138

Ranges of sensor operated flow control devices incorporating solenoid valves with acetal bodies, EPDM rubber diaphragms, stainless steel pins and plungers. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
1906138
Expiry date:
30/06/2024
Note:
IRN’s R001, R040 apply when the devices are used to control flow to a tap or shower. IRN’s R001, R075, R120 apply when the devices are used to control flow to a urinal.
Size:
10mm spigot
Marking:
DOLPHIN & DOLPHIN LOGO ON TAP BASE
Installation Requirements:
R001 R008
Model:
Prox sensor Kit for faucet: DB6220/DB6225 Wave On/Off sensor Kit for faucet: DB6240/DB6245 Prox sensor Kit for shower: DB6210/DB6215 Wave On/Off sensor Kit for shower: DB6280/DB6285 Prox sensor Kit for urinal: DB620/DB625 Wave On/Off sensor Kit for urinal: DB6250/DB6255
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#1904079

Dolphin Blue Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled with a solenoid valve activated via touch operation. The spout outlets incorporate plastic aerators and the flexible hoses incorporate a stainless-steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
1904079
Expiry date:
30/04/2024
Size:
Stainless steel braided PEX lined flexible hose assembly incoporating ⅜” captive nut end connections.
Marking:
DOLPHIN & DOLPHIN LOGO ON TAP BASE
Installation Requirements:
R001 R006 R009
Model:
DB840x.y, DB845x.y, DB850x.y & DB875x.y
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#1904081

Range of brass or stainless steel double interlocked hoses incorporating EPDM inner hoses. The hoses are supplied with EPDM gaskets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
1904081
Expiry date:
30/04/2024
Size:
For DN 14 various brass end connectors: 1/2" knurled nuts - female 1/2" hexagonal nuts - female 1/2" smooth nuts - female 1/2" conical nuts - female 1/2" anti-twist conical nuts - female 3/4" knurled round nut - female 3/8" nuts - female 3/8" cylindrical connector - female 1/2" demountable connector - female 3/8 M 15 x1 M 12 x 1M For DN 15 various brass end connectors: 1/2" knurled nuts - female 1/2" hexagonal nuts - female 1/2" smooth nuts - female 1/2" conical nuts - female 1/2" anti-twist conical nuts - female 3/8 M For DN 17 brass end connectors: F1/2 x F1/2
Marking:
DOLPHIN LOGO (D) ON FERRULE
Installation Requirements:
R001
Model:
Dolphin Blue DB30ab.ccc.d.ee "a" Identifies the material type of the metal interlocked hose and threaded end connectors; these codes can be: DB303x. for brass material DB304x. for stainless steel material "b" Identifies the type of fitting/threaded connector at either end of the hose ranging from DB30a1. to DB30a9. "ccc" Identifies the length range of the metal interlocked hose from 500mm "DB30ab.200" "d" Identifies the external finish to the metal parts from "DB30ab.ccc.1 to DB30ab.ccc.9": "1" denotes brushed/satin polished "2" denotes mirror polished "3" denotes brushed/satin polished with PVD coating "4" denotes mirror polished with PVD coating "5" denotes powder coated "6 - 9" to denote other material and finish optoins that may be available in the future "ee" indicates the colour of PVD or powder coat that has been applied from "DB30ab.ccc.d.00" to "DB30ab.ccc.d.99"
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2003342

Range of shower heads incorporating stainless steel bodies (various finishes) and silicone rubber nozzles. The inlet incorporates a flow regulator and a swivel connection. Maximum operating temperature 45°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2003342
Expiry date:
31/03/2025
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
Dolphin logo on body.
Installation Requirements:
R001 R040
Model:
DB3001.x(.xx) Dolphin Blue Stainless Steel Slimline Shower Head 250x250 Round DB3002.x(.xx) Dolphin Blue Stainless Steel Slimline Shower Head ø250 Square ‘x’ denotes the finish and is replaced with: 1 = brushed/satin polished. 2 = mirror polished. 3 = brushed/satin polished with PVD coating. 4 = mirror polished with PVD coating. 5 = powder coating. 9 – other finishes that may be available in the future. ‘xx’ only applies to products with a PVD coating, denotes the colour of the PVD and is replaced with numbers between 00 and 99.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2003347

Range of shower heads having stainless steel bodies (various finishes, see model) and silicone rubber nozzles. The inlet incorporates a flow regulator. Maximum operating temperature 65°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2003347
Expiry date:
31/03/2025
Note:
Open outlet use only
Size:
½” BSP (M)
Marking:
Dolphin logo on body.
Installation Requirements:
R001 R040
Model:
DB3000.x(.xx) Where .x denotes finish and can be replaced by: .1 - .5 to denote the finish: .1 to denote brushed/satin polished, .2 to denote mirror polished, .3 to denote brushed/satin polished with PVD coating, .4 to denote mirror polished with PVD coating & .5 to denote powder coated. .6 - .9 to denote other material and finish options that may be available in the future. And .xx denotes finish and can be replaced by: (.xx), in above codes, which when in use appear without the brackets, are only applicable where the previous suffix .3 to .5 is used and they will consist of numbers 00-99 to denote the colour of PVD or powder coat.
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2003357

Wall mounted shower outlet elbow (various finishes) and shower handset holder, incorporating EPDM ‘O’-rings. Maximum operating temperature 65°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2003357
Expiry date:
31/03/2025
Note:
Open outlet use only. This approval does not include a shower hose and handset.
Size:
½” BSP (M)
Marking:
Dolphin logo on body.
Installation Requirements:
R001 R040
Model:
DB3070.x.xx Where .x denotes finish and can be replaced by: .1 - brushed/satin polished, .2 - mirror polished, .3 - brushed/satin polished with PVD coating, .4 - mirror polished with PVD coating & .5 - powder coated. .6 - .9 to denote other material and finish options that may be available in the future. .xx denotes finish colour and can be replaced by: 00-99 to denote the colour of PVD or powder coat. This suffix is only applicable where the previous suffix for .x = .3, .4 or .5.
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2003371

Range of ceiling or wall mounted shower arms having brass bodies in various finishes. Open outlet use only. Maximum operating temperature 65°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2003371
Expiry date:
31/03/2025
Size:
½” BSP (M)
Marking:
Dolphin logo on body.
Installation Requirements:
R001 R040
Model:
Ceiling mounted range DB3060.200.x(.xx) DB3060.250.x(.xx) DB3060.300.x(.xx) Wall mounted range DB3061.300.x(.xx) DB3061.350.x(.xx) DB3061.400.x(.xx) DB3061.450.x(.xx) DB3062.300.x(.xx) DB3062.350.x(.xx) DB3062.400.x(.xx) DB3062.450.x(.xx) Where x denotes finish and can be replaced by: .1 - .5 to denote the finish: .1 to denote brushed/satin polished, .2 to denote mirror polished, .3 to denote brushed/satin polished with PVD coating, .4 to denote mirror polished with PVD coating .5 to denote powder coated. .6 - .9 to denote other material and finish options that may be available in the future. And xx can be replaced by: .3 to .5 are used and they will consist of numbers 00-99 to denote the colour of PVD or powder coat.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#1911066

Range of shower outlets (chromium plated brass) incorporating a flow regulator. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
1911066
Expiry date:
30/11/2024
Note:
Open outlet use only.
Size:
see model
Marking:
Dolphin on body
Installation Requirements:
R001 r040
Model:
DB1031x-y – ½” BSP (F) DB1032x-y – 15mm compression X denotes the finish: C = mirror polished chrome plate, S = satin polished nickel plate with lacquer, S-2 = satin polished chrome plate Y denotes the decorative coating and colour
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#1910069

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated stainless steel body). Flow is controlled by a solenoid valve that is activated via an infrared sensor. The spout outlets incorporate plastic aerators. Models with two inlets are supplied with hoses that incorporate stainless steel strainers and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models with single inlets incorporate stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1910069
Expiry date:
31/10/2024
Note:
R010 only applies to models DB186x-y, DB181x-y, DB180x-y, DB181-316 & DB186-316
Size:
Models with one inlet: 10mm spigot connection. Models with two inlets: stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜” BSP captive nut.
Marking:
DOLPHIN LOGO ON tap body
Installation Requirements:
R001 R006 R009 R010
Model:
Models with one inlet: DOLPHIN BLUE DB180x-y, DOLPHIN BLUE DB185x-y, DOLPHIN BLUE DB180-316 & DOLPHIN BLUE DB185-316. Models with two inlets: DOLPHIN BLUE DB181x-y, DOLPHIN BLUE DB186x-y, dolphin blue DB181-316 & DOLPHIN BLUE DB186-316.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2009321

Range of deck mounted, electronically operated combination tap assemblies (chromium plated brass) incorporating a solenoid valve controlling the flow which is actuated via in infrared sensor. The spout outlet incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009321
Expiry date:
30/09/2025
Size:
½” BSP (M)
Marking:
Dolphin Solutions logo (D with a dolphin) on Body
Installation Requirements:
R001 R006
Model:
DSaaa.bbb.ccc.d.ee Where ‘aaa’ denotes the style type, the following options are available: DS211 - 90° bent spout DS213 - 55° bent spout Where ‘bbb’ denotes the vertical height of the spout in mm. Range 125mm - 225mm in 25mm increments. Where ‘ccc’ denotes the horizontal length (projection) of the spout in mm. Range 125mm – 225mm in 25mm increments. Where ‘d’ denotes the material finish, the following options are available: 1 - brushed satin, 2 - mirror polished, 3 - PVD satin, 4 - PVD mirror polished or 5 - powder coated. Where ‘ee’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette.
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2009320

Range of wall mounted, electronically operated combination tap assemblies (various finishes, see model ) incorporating a solenoid valve controlling the flow which is actuated via in infrared sensor. The spout outlets incorporate a aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009320
Expiry date:
30/09/2025
Size:
½” BSP (M)
Marking:
Dolphin Solutions logo (D with a dolphin) on body
Installation Requirements:
R001 R040
Model:
DSaaa.bbb.c.dd Where ‘aaa’ denotes the style type, the following options are available: DS111 - 90° bent spout, DS112 - 90° bent spout with wall plate fixing kit, DS113 - 55° bent spout or DS114 - 55° bent spout with wall plate fixing kit. Where ‘bbb’ denotes the projection of the spout from wall to spout outlet in mm. Range 100mm - 275mm in 25mm increments. Where ‘c’ denotes the material finish, the following options are available: .1 – brushed/satin, .2 - mirror polished, .3 - PVD on brushed/satin, .4 - PVD on mirror polished or .5 – powder coated (PC). Where ‘dd’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2106334

Dolphin Blue Flexi hose range of wall outlets and brackets incorporating stainless steel bodies (various finishes) and EPDM ‘O’-rings. Maximum operating temperature 85°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2106334
Expiry date:
30/06/2026
Size:
½” BSP (M)
Marking:
Dolphin logo (D) on body.
Installation Requirements:
R001 R040
Model:
DB3071.x(.xx) The suffix .x in the above codes – DB3071.x(.xx) - will be a number 1 - .5 to denote the finish: 1 to denote brushed/satin polished, 2 to denote mirror polished, 3 to denote brushed/satin polished with PVD coating, 4 to denote mirror polished with PVD coating 5 to denote powder coated. .6 - .9 to denote other material and finish options that may be available in the future. The suffix (.xx), in above codes, which when in use appear without the brackets, are only applicable where the previous suffix .3 to .5 are used and they will consist of numbers 00-99 to denote the colour of PVD or powder coat. So for example DB3071.3.50 is brushed/satin polished with Gold PVD coating.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2106335

Dolphin Blue range of handheld shower outlets with a stainless bodies (various finishes) and EPDM ‘O’-rings. The inlet incorporates a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 85°C

Section:
1650 Shower Outlets
WRAS Approval Number:
2106335
Expiry date:
30/06/2026
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Dolphin logo (D) on body.
Installation Requirements:
R001 R040
Model:
DB3020.x(.xx) The suffix x in the above codes – DB3020.x(.xx) - will be a number 1 - 5 to denote the finish: 1 to denote brushed/satin polished, 2 to denote mirror polished, 3 to denote brushed/satin polished with PVD coating, 4 to denote mirror polished with PVD coating 5 to denote powder coated. 6 - 9 to denote other material and finish options that may be available in the future. The suffix (xx), in above codes, which when in use appear without the brackets, are only applicable where the previous suffix 3 to 5 are used and they will consist of numbers 00-99 to denote the colour of PVD or powder coat. So for example DB3020.3.50 is brushed/satin polished with Gold PVD coating.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2201325

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass or stainless steel bodies). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2201325
Expiry date:
31/01/2027
Size:
½” BSP (M)
Marking:
Dolphin Solutions logo (a Dolphin) on body.
Installation Requirements:
R001 R040
Model:
DS120 Series InForm SMART taps DSaaa.bbb.c.dd Where ‘aaa’ denotes the mounting type and can be replaced with: DS121 - thru panel mounted DS122 - wall plate mounted Where ‘bbb’ denotes the projection of the spout from wall to spout outlet in mm: Range 100mm - 275mm in 25mm increments Where ‘c’ denotes the material finish and can be replace with: 1 - brushed/satin 2 - mirror polished 3 - PVD on brushed/satin 4 - PVD on mirror polished 5 - powder coated (PC) Where ‘dd’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette.
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2203315

Range of deck mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies with stainless steel bodies (in various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The solenoid housing attaches to the main tap body via (black) LLDPE tubing. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2203315
Expiry date:
31/03/2027
Size:
½” BSP (M)
Marking:
Dolphin logo on body.
Installation Requirements:
R001 R006 R008 R010 R557 R570
Model:
DSaaa.bbb.ccc.d.ee – DS220 Series InForm SMART taps. Where ‘aaa’ denotes the mounting type, the following options are available: DS221 – straight spout DS223 – bent spout Where ‘bbb’ denotes the projection of the spout from body to spout outlet in mm. Range 95mm - 195mm in 25mm increments. Where ‘ccc’ denotes the height of the tap from the underside of the rosette to the top of the body in mm. Range 170mm – 370mm including 170mm, 260mm, 310mm & 370mm. Where ‘d’ denotes the material finish, the following options are available: .1 – brushed/satin, .2 - mirror polished, .3 - PVD on brushed/satin, .4 - PVD on mirror polished or .5 – powder coated (PC). Where ‘ee’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette.
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2111381

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111381
Expiry date:
30/11/2026
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: Dolphin, product date DD/MM/YY. 6L waterline within cistern
Installation Requirements:
R001 R556
Model:
DB551x.M & DB551x.P x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates mounting plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2112363

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112363
Expiry date:
31/12/2026
Size:
½” BSP (M)
Marking:
Dolphin logo on adhesive label below insert within cistern: 6L waterline on casing within cistern Dolphin logo on flush plate
Installation Requirements:
R001 R556 R571
Model:
DB552x.M, DB552x.M, DB552x.M, DB552x.M.1130, DB552x.P.1130 & DB552x.C.1130 concealed WC flushing cisterns ‘x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval


#2206354

Range of wall mounted mirrored units incorporating an electronically controlled combination tap assemblies. Flow is controlled via solenoid valve which is actuated by an infra-red sensor. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2206354
Expiry date:
30/06/2027
Note:
R008 applies to the solenoid valve and its housing. This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation.
Size:
½” BSP (M).
Marking:
Dolphin Solutions Ltd. logo (letter D with integral dolphin silhouette) on underside of mounting bracket. Products with the Alavo behind mirror baseplate mounting option are marked Dolphinsolutions.co.uk on the underside of the base plate.
Installation Requirements:
R001 R007 R008 R040 R570
Model:
DS191.xx - Dolphin Alavo behind mirror inform (SMART) tap. Where xx denotes the size and shape of the mounting bracket and can be any combination of letters and/or numbers.
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.